Progress thread CRays PE journey

[CRay2323]

Saw this video which I found hilarious and thought I would share since it’s on topic with this forum. They asked guys to guess and rank each other by dick size and then measured them soft, hard and their girth and they had to discuss the number and then really line up in order. I’m happy with the fact that I would be first in girth (6.1”-6.25”) depending on the day and erection and second in length at 7.5-7.75”. You could tell they were doing boned pressed cause they used a urologist and put up the average from the famous study that used bone pressed

 

[CRay2323]

Oops. That’s a reaction vid to it. Here is the original vid

 

[CRay2323]

Need some help guys. I guess I restarted to aggressively and now have a blister that needs to heal. The blister is from my vacuum extender. Should I just up the time with the length master while the blister heals since the length master doesn’t bother my blister. Can I still make gains just doing the length master without anchoring with the extender? @huge-girth @MosMaster @DLD

 

[huge-girth]

Need some help guys. I guess I restarted to aggressively and now have a blister that needs to heal. The blister is from my vacuum extender. Should I just up the time with the length master while the blister heals since the length master doesn’t bother my blister. Can I still make gains just doing the length master without anchoring with the extender? @huge-girth @MosMaster @DLD

Wait for your blister to heal. The length master can bring gains on it's own by doing bundled stretches. I've gained up to 2.5 inches from that.

 

[CRay2323]

@huge-girth, I’m currently doing the beginner program with the stretches you showed in a video. Up,down side. Is that the same or is there another video showing the bundled stretches?

 

[huge-girth]

@huge-girth, I’m currently doing the beginner program with the stretches you showed in a video. Up,down side. Is that the same or is there another video showing the bundled stretches?

That's the beginner video.

 

[CRay2323]

@huge-girth gotcha. So just do that until I heal. 3 times a day you think? Each session is 4 sets of the 6 directions for 1 min.

 

[huge-girth]

@huge-girth gotcha. So just do that until I heal. 3 times a day you think? Each session is 4 sets of the 6 directions for 1 min.

If it doesn't hurt the blister, you can do it. Otherwise I suggest you stop until the blister heals. 20 mins per session three times a day.

 

[MosMaster]

@huge-girth gotcha. So just do that until I heal. 3 times a day you think? Each session is 4 sets of the 6 directions for 1 min.

Should be fine if it's not interfering with blister. Remember, start progressively, not aggressively

 

[DLD]

Awesome to see you back in full effect

 

[CRay2323]

So back at it today but I’m sticking to only the length master while this blister heals.

length master - beginner routine: 6 directions 1 min each direction for 5 sets two times today for a total of 60 mins

 

[CRay2323]

Funny thing is I didn’t tell my girlfriend I started PE again because she complained so much that I’m already big enough and at times she got super sore from sex. I’m going to keep it a secret and see if she norices

 

[squirt_inducer_man]

Funny thing is I didn’t tell my girlfriend I started PE again because she complained so much that I’m already big enough and at times she got super sore from sex. I’m going to keep it a secret and see if she norices

You should never tell her. Keep it a secret. I have been told there is something called: Penis envy.

How big are you, since she's complaining about soreness from sex?

 

[CRay2323]

You should never tell her. Keep it a secret. I have been told there is something called: Penis envy.

How big are you, since she's complaining about soreness from sex?

It’s my girth with she struggles with. My girth is between 6.1” and 6.25” depending on the day. Right now my length is about 7.5” bone pressed

 

[huge-girth]

It’s my girth with she struggles with. My girth is between 6.1” and 6.25” depending on the day. Right now my length is about 7.5” bone pressed

What was your old girth measurement and how long did it take you to get to 6.1?

 

[CRay2323]

What was your old girth measurement and how long did it take you to get to 6.1?

I’m actually lucky with girth in that before I ever tried PE my girth was 6” and I hit 6.25” from just extender length work. My focus is more on length with PE

 

[DLD]

Funny thing is I didn’t tell my girlfriend I started PE again because she complained so much that I’m already big enough and at times she got super sore from sex. I’m going to keep it a secret and see if she norices

Always keep it secret

 

[MosMaster]

Always keep it secret

Is my girl the only one who knows about PE and even tells me to keep pushing harder and tell me to hurry up and gain AT LEAST 1 one inch more hahaaa

 

[CRay2323]

Is my girl the only one who knows about PE and even tells me to keep pushing harder and tell me to hurry up and gain AT LEAST 1 one inch more hahaaa

That’s awesome. I wish mine supported it. I’m already the biggest guy she’s ever been with.

 

[CRay2323]

Time to catch up with the log:

yesterdays training
Length master - beginner program. 6 directions 1 min each way. 2x today. 4 sets first time and 3 sets second time. I was suppose to do a 3rd time of 3 sets but I got super tired and fell asleep argh….

today
Session 6. Length master. Beginner program. 6 directions 1 min each way. 3x today. 4 sets, 3 sets, 3 sets

 

[DLD]

Is my girl the only one who knows about PE and even tells me to keep pushing harder and tell me to hurry up and gain AT LEAST 1 one inch more hahaaa

One in a million

 

[squirt_inducer_man]

One in a million

That's why we keep PE with the status of a secret project.

 

[DLD]

That's why we keep PE with the status of a secret project.

Exactly...we want no competition

 

[CRay2323]

Got my hr in today:

length master - beginner routine all 6 diretions for 1 mins, 4x, 2x, 4x

 

[CRay2323]

Session 7: same as yesterday

length master - beginner routine all 6 diretions for 1 mins, 4x, 2x, 4x

definitely feeling more cormtable with the device. My wrapping is getting better and I feel better pulling harder. I attached a digital pulley weight scale and I am definitely pulling with over 10 lbs of force. The blister is healing well. I think I can start using my vacuum extender to cement the gains in a couple days but I’ll start with less pressure this time to adapt.

 

[DLD]

Glad you are getting accustomed to the equipment and training

 

[CRay2323]

So I’m uncut and just found out I’m suppose to pull the skin back when using the length master. I haven’t till this point. So today I experimented with that and the first set was a real pain cause my foreskin kept wanting to roll forward so I had to use my hands to hold it back constantly while wrapping and getting in the length master but I made it work. Then I really figured it out. I have some total man sleeves cut in like 1 inch pieces when I used them as passive sleeves. I took one of these, pulled my skin back and put one on like a cockring at the base and it worked great by holding the skin back for me. This got better and better through adjustments during the sets. I have always been great at problem solving. So got my hour in first time with the skin held back as follows:

Session 8:

length master - beginner routine all 6 diretions for 1 mins, 4x, 2x, 4x

 

[DLD]

So happy you are understanding the lengthmaster now it is smooth sailing ️

 

[CRay2323]

Question guys @MosMaster @DLD @huge-girth, how long can you safely leave the length master on for. I have heard different numbers for compression work and just curious how long you guys consider safe before taking it off and letting the blood start up again.

 

[CRay2323]

Session 9:

length master - beginner routine all 6 diretions for 1 mins, 4x, 3x, 3x

 

[huge-girth]

Question guys @MosMaster @DLD @huge-girth, how long can you safely leave the length master on for. I have heard different numbers for compression work and just curious how long you guys consider safe before taking it off and letting the blood start up again.

A maximum of 20 minutes.

 

[CRay2323]

A maximum of 20 minutes.

That’s what I was thinking. I kind of pushed it close last night by leaving it for 18 mins. I think I’ll cap it at 12 to be safer. I will say last night I felt the pulling sensation while sleeeping for the first time from the length master

 

[huge-girth]

That’s what I was thinking. I kind of pushed it close last night by leaving it for 18 mins. I think I’ll cap it at 12 to be safer. I will say last night I felt the pulling sensation while sleeeping for the first time from the length master

I get that sensation most times.

 

[squirt_inducer_man]

That’s what I was thinking. I kind of pushed it close last night by leaving it for 18 mins. I think I’ll cap it at 12 to be safer.

I split every 20 minute sessions in two, so 10 minutes doing LM dbs, and then detach, remove the wrap completely, rest like 3-5 minutes, then doing another LM dbs for 10 minutes ...then done with that session.

 

[squirt_inducer_man]

Exactly...we want no competition

Good comment

 

[MosMaster]

Question guys @MosMaster @DLD @huge-girth, how long can you safely leave the length master on for. I have heard different numbers for compression work and just curious how long you guys consider safe before taking it off and letting the blood start up again.

20-30 mins I would say. That works for me

 

[DLD]

20-30 mins I would say. That works for me

Great amount of time!

 

[CRay2323]

So one of the new toys I just ordered arrived. I know I have stated that I am mainly focused on length since my girth is actually naturally very good but after I hit my length goal I would like 1/4” more girth so I do have some pumps I have messed around with. I started with the bath mate but honestly it was hard to do regularly cause of how much time you have to be in the shower so I looked to dry pumping and bought the LA pump with the hand crank and pressure gauge but this also had draw back cause it would lose pressure then you had to hand crank. I saw this automatic pump which fits the LA pump and has 6 modes one of which automatically keeps the pressure you select so I picked it up and it arrived today.

I’ll give it a try this weekend and let everyone know how it is. I also have a new leg strap attachment coming for my vacuum extender. My blister is healed so I planned to start anchoring with the extender after the length master sessions this week.

 

[squirt_inducer_man]

So one of the new toys I just ordered arrived. I know I have stated that I am mainly focused on length since my girth is actually naturally very good but after I hit my length goal I would like 1/4” more girth so I do have some pumps I have messed around with. I started with the bath mate but honestly it was hard to do regularly cause of how much time you have to be in the shower so I looked to dry pumping and bought the LA pump with the hand crank and pressure gauge but this also had draw back cause it would lose pressure then you had to hand crank. I saw this automatic pump which fits the LA pump and has 6 modes one of which automatically keeps the pressure you select so I picked it up and it arrived today.

I’ll give it a try this weekend and let everyone know how it is. I also have a new leg strap attachment coming for my vacuum extender. My blister is healed so I planned to start anchoring with the extender after the length master sessions this week.

How high vaccum can that pump generate?
If you can return it, I would suggest that you buy the MityVac pump on MOS Store instead.
Lifetime warranty on MityVac.

 

[CRay2323]

How high vaccum can that pump generate?
If you can return it, I would suggest that you buy the MityVac pump on MOS Store instead.
Lifetime warranty on MityVac.

Not sure on the max yet cause it doesn’t come charged. I am charging it now. I saw that pump and it looked great. I was trying to save some money by buying an add for what I already have. This PE process have been a journey. I have bought several items I stopped using to find the right stuff. Oh well, I guess it’s part of the learning process. If I don’t like how this works I’ll get the one from MOS

 

[squirt_inducer_man]

Not sure on the max yet cause it doesn’t come charged. I am charging it now. I saw that pump and it looked great. I was trying to save some money by buying an add for what I already have. This PE process have been a journey. I have bought several items I stopped using to find the right stuff. Oh well, I guess it’s part of the learning process. If I don’t like how this works I’ll get the one from MOS

Sounds good. Keep growing.

 

[squirt_inducer_man]

Following your thread, and it will be interesting to see how this new pump of yours are performing.

 

[CRay2323]

Session 10:

length master - beginner routine all 6 diretions for 1 mins, 3x, 3x, 4x

so I couldn’t help myself and tried the pump. At first I was worried cause I got no pressure. What I notice is that a rubber ring near the attachment had broken off which keep it air tight. Luckily it’s the same part that comes with the manual pump which I already have so I just swapped it out and it worked perfectly. Once you find your pressure it lets it drop just 1-2kps below and auto refills to what u set it. I use it tonight as a primer for my last session of length master to fluff me up and it worked well

 

[CRay2323]

Session 11:

length master - beginner routine all 6/7 diretions for 1 mins, 2(7), 3(7), 3 (6)
so to save time and cut back on rewrapping I added an extra down stretch to my first two sets for 7 directions. So that is 3x7 twice for a min and 3x6 for a min for a total of 1hr with no rewrapping during a set to make things as fast and easy as possible

 

[DLD]

Subscribed

 

[CRay2323]

Session 12:

length master - beginner routine all 6/7 diretions for 1 mins, 2(7), 3(7), 3 (6) - 1 hr total

 

[DLD]

Session 12:

length master - beginner routine all 6/7 diretions for 1 mins, 2(7), 3(7), 3 (6) - 1 hr total

Excellent lengthmaster workout

 

[CRay2323]

So today I started using the vacuum extender again to achor my gains after the length master.

question guys, what do you think is a good time to wear the extender after the length master if I’m doing the length master 3 times a day. How many hours is sufficient after each length master session. @DLD @huge-girth @MosMaster @squirt_inducer_man

 

[MosMaster]

So today I started using the vacuum extender again to achor my gains after the length master.

question guys, what do you think is a good time to wear the extender after the length master if I’m doing the length master 3 times a day. How many hours is sufficient after each length master session. @DLD @huge-girth @MosMaster @squirt_inducer_man

As much time as possible I would say are best. I know DLD used to recommend at least 4 hours of healing elongated after length-work.

 

[huge-girth]

So today I started using the vacuum extender again to achor my gains after the length master.

question guys, what do you think is a good time to wear the extender after the length master if I’m doing the length master 3 times a day. How many hours is sufficient after each length master session. @DLD @huge-girth @MosMaster @squirt_inducer_man

When using the length master in combination with an extender, 30 minutes is enough for the whole day. Do 10 minutes of length master exercises and wear the extender for 2 hours. Repeat three times making 30 minutes length master session and 6 hours extender time.