- Joined
- Jun 3, 2003
- Messages
- 4,176
Inside your SiliStretcher2 package you will find the following contents:
Know your SiliStretcher2
Setting the Piston
We designed the SiliStretcher2 so that the piston does not fully extract from the vacuum bell. You should not extract the piston any further than the half-way point inside the vacuum bell. This new feature prevents users from over vacuuming their penis and provides better grip and control to the penis by allowing the penis to insert into the SiliStretcher2 vacuum bell.
Retracting the Vacuum Piston
The piston should sit at the half way point (like in photo above) when not in use.
In the rare event that you over extract the piston and it no longer retracts when turning the vacuum knob, simply depress the piston with your finger (or preferably a small pipe) as you turn the vacuum knob until the piston retracts. This requires a little force and you may find it easier to use a small pipe or something hard so you can press the piston with leverage against a wall or table instead of your finger.
Remember to not over extract the piston to avoid this.
Starting Notes
Before using the SiliStretcher - All Day Penis Vacuum Stretcher and Weight Hanger, make sure your penis shaft is free of hair, oil, cream, clean, dried and powdered with the supplied MOSGrip gripping powder. Hairs will create loss of suction with the Blue SiliSleevs and the SiliStretcher
SiliPads
The Blue Silipads are interchangeable and provide an extra level of comfort and help reduce fluid retention by contouring to the shape of your penis. When you receive you SiliStretcher, the blue contoured silicone SiliPad is pre-installed. You can start with this one and/or exchange with one of the other two jel pads provided. Each user has different preferences based on penis shape, size and method used.
SiliSleevs
We now include two SiliSleev2s for beginners along with the DuroSleevs to get accustom to vacuum stretching. The SiliSleev2 is a softer sleeve that is easier to apply and wear long term until your penis gets conditioned for the DuroSleev.
There are two different diameter DuroSleevs included. Find the size that fits you best without slippage or causing your penis to get cold after long hours of use. They are both interchangable with the SiliStretcher2.
SiliCap2
For people that are new to vacuum pumping or using a vacuum system similar to the SiliStretcher2, you may find fluid build up in the tip of your penis after excessive tension/weight or long periods of use. This is normal and can be massaged out after use of the SiliStretcher.2
The SiliCap2 helps reduce fluid retention (edema) in the head (glans) of your penis. Use both the SiliCap2 with the SiliPad in the beginning. Once your penis gets accustomed to vacuum pressure, you may find that you can eliminate the SiliCap2 and just use the SiliPads to prevent fluid retention.
DuroBand
The DuroBand is the short transparent band included with your SiliStretcher2. You apply this band as a top layer of protection over the DuroSleev and SiliStretcher around the vacuum bell flange. The DuroBand will increase the life of your SIliSleevs and DuroSleevs when used under your pants as an all day stretcher.
Using the SiliStretcher
Carefully attach the semi-transparent DuroSleev that was included inside the velvet bag with the SiliStretcher2. Make sure the thick-band end of the DuroSleev is attached above the flange the SiliStretcher bell and is straight on.
Turn the SiliStretcher2 vacuum piston knob a half twist counter-clockwise. One half turn of the vacuum piston knob is 5 in.-Hg of vacuum. Your penis will be safely pulled and secured into the SiliStretcher2. Give the SiliStretcher2 a tug to test if you are properly secured inside the SiliStretcher2 before applying tension or weight.
Apply the DuroBand over the DuroSleev around the SiliStretcher2 vacuum bell flange for an extra layer of protection.
DO NOT OVER VACUUM
Do not use excessive vacuum to the point the SiliStretcher2 starts pulling the SiliSleev inside the SiliStretcher. This will eventually cause micro pin holes in the DuroSleevs and cause loss of vacuum.
Attach the ADS belt or hanger clip to the end of the SiliStretcher.
Adjust tension or weight and begin session.
To release vacuum, turn the SiliStretcher vacuum piston knob a twist in the opposite direction.
Maximize the life of your SiliSleevs
To maximize the life of your DuroSleeves, remove them from the SiliStretcher2 when not in use. Do not keep them rolled up for any period of time as this will likely stretch and deform them. Keep them clean, dried, powdered with MOSGrip and store in a ziplock bag away from direct sun or heat.
How long to use? How much tension? How much weight?
Start off light and slow, listen to your body. There is no rush, and from what we learned over the course of 20 years, that heavy tension/weights for short period sessions is not the way to gain penis length. You want moderate tension and weight for long periods of time. This allows your penis tissue to expand and then build collagen in the extended state.
For the first three days, start with an hour or two of use at moderate tension and let your penis get accustomed to stretching. Then gradually work up to six hours or more per day as you slowly increase tension.
More Info
For further information, videos and routines on the SiliStretcher, please visit our support forum at: SiliStretcher Vacuum Penis Stretcher Forum
Support: support@mattersofsize.com
Web: shop.mattersofsize.com
- SiliStretcher2(s) of choice
- Blue SiliPad and gel pads
- Two DuroSleevs
- Two SiliSleev2s
- One SiliCap2
- ADS (All Day Stretcher) Belt with clip
- SiliStrap Shoulder Strap
- Hanging arbor and spring clip
- Weight plates (2.5lbs included)
- Micro-porous tape (for foreskin users)
- MOSGrip gripping powder
- Discrete carry bag
Know your SiliStretcher2
Setting the Piston
We designed the SiliStretcher2 so that the piston does not fully extract from the vacuum bell. You should not extract the piston any further than the half-way point inside the vacuum bell. This new feature prevents users from over vacuuming their penis and provides better grip and control to the penis by allowing the penis to insert into the SiliStretcher2 vacuum bell.
Retracting the Vacuum Piston
The piston should sit at the half way point (like in photo above) when not in use.
In the rare event that you over extract the piston and it no longer retracts when turning the vacuum knob, simply depress the piston with your finger (or preferably a small pipe) as you turn the vacuum knob until the piston retracts. This requires a little force and you may find it easier to use a small pipe or something hard so you can press the piston with leverage against a wall or table instead of your finger.
Remember to not over extract the piston to avoid this.
Starting Notes
Before using the SiliStretcher - All Day Penis Vacuum Stretcher and Weight Hanger, make sure your penis shaft is free of hair, oil, cream, clean, dried and powdered with the supplied MOSGrip gripping powder. Hairs will create loss of suction with the Blue SiliSleevs and the SiliStretcher
SiliPads
The Blue Silipads are interchangeable and provide an extra level of comfort and help reduce fluid retention by contouring to the shape of your penis. When you receive you SiliStretcher, the blue contoured silicone SiliPad is pre-installed. You can start with this one and/or exchange with one of the other two jel pads provided. Each user has different preferences based on penis shape, size and method used.
SiliSleevs
We now include two SiliSleev2s for beginners along with the DuroSleevs to get accustom to vacuum stretching. The SiliSleev2 is a softer sleeve that is easier to apply and wear long term until your penis gets conditioned for the DuroSleev.
There are two different diameter DuroSleevs included. Find the size that fits you best without slippage or causing your penis to get cold after long hours of use. They are both interchangable with the SiliStretcher2.
SiliCap2
For people that are new to vacuum pumping or using a vacuum system similar to the SiliStretcher2, you may find fluid build up in the tip of your penis after excessive tension/weight or long periods of use. This is normal and can be massaged out after use of the SiliStretcher.2
The SiliCap2 helps reduce fluid retention (edema) in the head (glans) of your penis. Use both the SiliCap2 with the SiliPad in the beginning. Once your penis gets accustomed to vacuum pressure, you may find that you can eliminate the SiliCap2 and just use the SiliPads to prevent fluid retention.
DuroBand
The DuroBand is the short transparent band included with your SiliStretcher2. You apply this band as a top layer of protection over the DuroSleev and SiliStretcher around the vacuum bell flange. The DuroBand will increase the life of your SIliSleevs and DuroSleevs when used under your pants as an all day stretcher.
Using the SiliStretcher
Carefully attach the semi-transparent DuroSleev that was included inside the velvet bag with the SiliStretcher2. Make sure the thick-band end of the DuroSleev is attached above the flange the SiliStretcher bell and is straight on.
Put the Blue SiliCap on the head of your penis to prevent fluid retention, blistering, bruising and reduce sensitivity.
Roll the DuroSleev back over the SiliStretcher2
Put the head of your penis into the SiliStretcher2
Unroll the DuroSleeve over the shaft of your penis
Turn the SiliStretcher2 vacuum piston knob a half twist counter-clockwise. One half turn of the vacuum piston knob is 5 in.-Hg of vacuum. Your penis will be safely pulled and secured into the SiliStretcher2. Give the SiliStretcher2 a tug to test if you are properly secured inside the SiliStretcher2 before applying tension or weight.
Apply the DuroBand over the DuroSleev around the SiliStretcher2 vacuum bell flange for an extra layer of protection.
DO NOT OVER VACUUM
Do not use excessive vacuum to the point the SiliStretcher2 starts pulling the SiliSleev inside the SiliStretcher. This will eventually cause micro pin holes in the DuroSleevs and cause loss of vacuum.
Attach the ADS belt or hanger clip to the end of the SiliStretcher.
Adjust tension or weight and begin session.
To release vacuum, turn the SiliStretcher vacuum piston knob a twist in the opposite direction.
Maximize the life of your SiliSleevs
To maximize the life of your DuroSleeves, remove them from the SiliStretcher2 when not in use. Do not keep them rolled up for any period of time as this will likely stretch and deform them. Keep them clean, dried, powdered with MOSGrip and store in a ziplock bag away from direct sun or heat.
How long to use? How much tension? How much weight?
Start off light and slow, listen to your body. There is no rush, and from what we learned over the course of 20 years, that heavy tension/weights for short period sessions is not the way to gain penis length. You want moderate tension and weight for long periods of time. This allows your penis tissue to expand and then build collagen in the extended state.
For the first three days, start with an hour or two of use at moderate tension and let your penis get accustomed to stretching. Then gradually work up to six hours or more per day as you slowly increase tension.
More Info
For further information, videos and routines on the SiliStretcher, please visit our support forum at: SiliStretcher Vacuum Penis Stretcher Forum
Support: support@mattersofsize.com
Web: shop.mattersofsize.com
Last edited:
