Progress thread VTec’s Length Journey

[VTecEngine]

Man really excited for these gains coming in, I’m at 7.15 - 7.25 with Kegel push. this needs to be documented straight up started from 5.9 NBPEL now 7.15 gonna keep going for the goal. Makes me laugh in a good encouraging joy. Go champ go


I have good 2.5 - 3.5 inch of inner penis left to pull maybe more. Gotta go knock out those sessions, let’s get it in guys. The faster you get to that size you want, the faster you to get to the maintenance/cementing/permanent gains, be consistent and diligent, no sacrifice, no victory. I like to look at this as well as mental training while doing PE.

 

[oldandlively]

Hey, I tried to look for it couldn’t find it. If you can do that, I’ll appreciate that. Helpful as always. Thank you.

Definitely, brother. Here's the PA diagram routines:

Thread 'The Power Assist Videos! Get a Power Assist and Get Started!'

Jan 26, 2005

View attachment 1828846
View attachment 1828847
View attachment 1828848
View attachment 1828850
View attachment 1828851
View attachment 1828852
View attachment 1828853
View attachment 1828854
View attachment 1828855
View attachment 1828849​

View attachment 1828846
View attachment 1828847
View attachment 1828848
View attachment 1828849
View attachment 1828850
View attachment 1828851
View attachment 1828852
View attachment 1828853
View attachment 1828854
View attachment 1828855

• DLD
• doublelongdaddy erect exercise exercises flaccid gains hanging penis phallosan question research results routine stillwantmore stretch stretcher stretching stretchy video
• Replies: 78
• Forum: Power Assist Forum

Using the PA, you can combine further with these exercises:

https://mattersofsize.com/media/albums/mos-dvd.333/

• Fake Arm
• Lazy Ass Stretch
• Dual Fulcrum
• Under-leg Fulcrum
• Tunica Rotary (angling the penile shaft slightly downwards from the fulcrum point)
• Tub Stretch without the tub
• Bends & Blaster
• Even Bundled Bends and applied with bundled Counter Bends

If that's not enough, switch over to this list of stretches:

Thread 'Collection of PE Exercises at MoS'

Sep 10, 2004

NATURAL Penis Enlargement EXERCISES​

Collection of Length Stretching Exercises and Info:

DLD's Original Exercises (alphabetical)

Other Brothers' Exercises (alphabetical) and additional info

A-Stretches - High Angle A-Stretch - An Easy Way to Increase Tension Counter Stretches Video Crazy Girth Busters DLD Blasters DLD Blasters - Kegels - Reverse Kegels: The Basics DLD Reverse Blaster Double Tunica Stretch Dual Double...​

• DLD
• ads clamping clamps depression dld blasters doublelongdaddy edging effective erect exercise exercises extreme extreme girth flaccid foreskin girth glans hanging jelqs kegels larger newbie routine penis progress pump routine short size slow squash jelq stillwantmore stretch stretcher stretching supra slammers tension video wrap
• Replies: 63
• Forum: Penis Pumping Forum

• 

 

[DLD]

Just get a Lengthmaster. You’re legit getting 3 devices in one. Nothing in the market can beat that. Plus a Silistretcher, trust me you won’t regret it

The perfect combination

 

[VTecEngine]

Hey guys, is there anyway I can order silistretcher cup 1.25 with the blue silicap it comes with? I wanna buy it, cleaning lady threw it away by accident :/ anyways, let me know thanks making good gains btw I’m at 7.25 NBPEL now been utilizing the silistretcher more after length work. Just stay consistent and diligent.

 

[oldandlively]

@DLD, mind working with Shenna for brother VTecEngine on obtaining just the vacuum cup? I think a customized invoice is required to be generated by her.

 

[DLD]

Hey guys, is there anyway I can order silistretcher cup 1.25 with the blue silicap it comes with? I wanna buy it, cleaning lady threw it away by accident :/ anyways, let me know thanks making good gains btw I’m at 7.25 NBPEL now been utilizing the silistretcher more after length work. Just stay consistent and diligent.

Send me your name and your address and exactly what you want.And I will put it through for you

 

[VTecEngine]

ball stretcher weights work by any chance or beneficial? Including that with the ball & lig stretches? What are some the benefits having those weights on your balls 24/7 let’s say? Thanks

 

[oldandlively]

ball stretcher weights work by any chance or beneficial? Including that with the ball & lig stretches? What are some the benefits having those weights on your balls 24/7 let’s say? Thanks

Yes, and yes. But there must not be any hindrance on the weight hanging. If you wear them in the pants, the pants will prevent the weight from pulling like they should.

 

[DLD]

ball stretcher weights work by any chance or beneficial? Including that with the ball & lig stretches? What are some the benefits having those weights on your balls 24/7 let’s say? Thanks

If you do the Dld ball and lig stretch there'sthere is no need for ball stretchers. But if you do go that route, follow the advice of @oldandlively

 

[VTecEngine]

what type of pants do you recommend if you were wear em? @oldandlively and thanks @DLD I want bull balls. You know the type that knocked out Goliath. that’s why I ask, you get the best of both worlds doing DLD ball & lig stretch with the ball stretcher( as I presume) afterwards but yes might be better to save the 100 bucks for SiliSleeves.

What’s a good weight to start off with? @oldandlively also what’s the progression look like ?

 

[DLD]

I wear sweatpants when i'm using ace or any other type of wrap as this hides, it pretty well

 

[oldandlively]

what type of pants do you recommend if you were wear em? @oldandlively and thanks @DLD I want bull balls. You know the type that knocked out Goliath. that’s why I ask, you get the best of both worlds doing DLD ball & lig stretch with the ball stretcher( as I presume) afterwards but yes might be better to save the 100 bucks for SiliSleeves.

What’s a good weight to start off with? @oldandlively also what’s the progression look like ?

Sweat pants, or very loose jeans or pants. I wore 501 Tactical pants for hot days, quite loose, extremely loose work pants working in the woods and fields, and simply loose sweats while going out shopping or just going about. It felt very strange to have weights hanging and dangling in your pants. It was like a Grandfather's clock arm doing micro second ticking between the leg and pants' sleeve.

The progressive gain is much faster than the penis exercises. It speeds up much more using DLD Balls and Ligs stretches before the hanger. It's like a combo of manual and mechanical assist exercises. Just don't over work yourself. These kind of exercises should be done in moderation just like pumping and stretching penis. The critical point is to stretch in moderate traction around 2lbs for as long as you can, even at 2.5lbs. You have both the ligs and larger mass of skin and muscles to overcome at the base. Yes, the scrotal sac don't have any hard tissues. But when you strap the dual strap version, you are also pulling the penis. Single strap version only pull the scrotal sac.

 

[VTecEngine]

Fuck! I got a blister on my glans from SS I went to hard now I gotta take 2 weeks off approx. it’s ok if I try to do other exercises light hanging or light stretching? I don’t want to prolong the blister. I needa go to back to gain mode as fast as possible.

 

[oldandlively]

Fuck! I got a blister on my glans from SS I went to hard now I gotta take 2 weeks off approx. it’s ok if I try to do other exercises light hanging or light stretching? I don’t want to prolong the blister. I needa go to back to gain mode as fast as possible.

Yep. That's the monster that gets you every time using vacuum type extender and stretcher. No need to take a full two weeks off because of the blister. You can still do light jelqing or even stretching while there's a blister. Simply create a wrap at the base of the glans to prevent blood from being forced into the glans during jelqing session, and you'll be able to do SSJ just fine.

If you use SS2 to extend, you can do the same without the vacuum cup during a blister recovery, by wrapping below the base of the glans, don't let blood flow into the glans too quickly by tighten up the wrap just a bit more, and make sure the wrap doesn't rub against the blister as the glans shrinks. Cover up the glans using a thin layer of soft material, like the TheraBand, flexible tape, or something soft. You can modify the strap to have a V-Shape holder, something like a noose type stretcher/extender, and have obtain a similar traction force. Just a cheap platform like this from an extender add-on will help as well. I tried this when I have a blister that required recovery, and it worked pretty well with the SS2 setup. The blistering site can be a bit irritated if it rubs too much against clothing with this on. The trick is to use a silicone sleeve to dress over the glans as a protection layer.

 

[VTecEngine]

Awesome advice man thanks!, ima using VLC tugger attachment with an extender using only 3.5 lbs - 5 lbs so far so good I can go light stretches and jelqs too. Erect cement stretch and bends the trick is not to hard of a pull.

@oldandlively Since you got some background on these, any prevention tips for blisters on glans happening again? Glan cap with some taping I’m thinking. Thanks

 

[oldandlively]

@oldandlively Since you got some background on these, any prevention tips for blisters on glans happening again? Glan cap with some taping I’m thinking. Thanks

Yes. Go easy on the knob rotation. I only use half rotation for the SS2. That's bringing it up to -4 or even -5inHg. Accidental stretch because you bend over or pull your leg too far when the SS2 is strapped to your knee can push the pressure from -4 to -5inHg to go past -9 or -10inHg instantly. What I did was to use double the penis sleeves over the base of the glans and the vacuum cup to increase the bridging friction. Like I described many times before, I use TheraBand to wrap below the base of the glans to increase the "bulk" of the friction end so it can hold onto glans, shove the glans in as far as I could into the cup, place the first sleeve over the vacuum cup, twist the knob half way to engage the vacuum pressure, and then pull the second sleeve over the first one as far up the cup as I can. First sleeve acts as a vacuum system seal. Second sleeve acts as a traction tension bridge.

Brothers here use SiliSleev#2 or equivalent (3.5mm thickness) for the inside to have better vacuum connection, while using SiliSleev#5 on the outside (5 to 6.5mm thickness) for durability and strong holder for that extra traction. For me, I tend to recycle my old sleeves I have on hand. Sometimes I use two 3.5mm or 4mm, and sometimes I use the thinner and thicker, whichever I have available at the time. My drawers are full of sleeves. Don't expect a sleeve to last too long as you fold, stretch, and scratch them daily. I have quite a few SiliSleevs, but I also purchase quite a few of them on AliExpress as well. I went through them quite a bit. Those who use sleeves from various vacuum type manufacturers will tell you the same thing. Sleeves are comfortable to use, but they are also fast expendable items.