Ultrasound Penis Enlargement

[Jackxxx]

What is the best device on the market that applies the specifications?

The member who got the best results and took this topic to science, Kyrpa, achieved it with the US Pro 2000 2nd Edition portable transducer. Another user who also put years of research and effort following a similar protocol, eventually upgraded to a SoundCare Plus which has more potency but runs at around $800

 

[Alhuwaidi]

Hi, I have purchased a SoundCare Plus Professional Ultrasound

How do we apply or enter an ultrasound unit with a daily routine of training? Did I use it before training or with training?

 

[Jackxxx]

Hi, I have purchased a SoundCare Plus Professional Ultrasound

How do we apply or enter an ultrasound unit with a daily routine of training? Did I use it before training or with training?

I recommend you to read and research extensively before you attempt US in your own dick. I shall not post links to other forums here, but if you google it you will get links to those threads that have years in the making. These threads have 15-20-30-60 pages with valuable information and answers to all the questions.

I intend to create a "quick guide" once I start my own protocol, but right now I wouldn't even know how to start to explain it.

Thats like calling a cardiologist and ask him "hey man I have my friend here passed out on a table and I have a knife in my hand ready to cut him open. How do I do a bypass surgery?"

 

[Alhuwaidi]

I recommend you to read and research extensively before you attempt US in your own dick. I shall not post links to other forums here, but if you google it you will get links to those threads that have years in the making. These threads have 15-20-30-60 pages with valuable information and answers to all the questions.

I intend to create a "quick guide" once I start my own protocol, but right now I wouldn't even know how to start to explain it.

Thats like calling a cardiologist and ask him "hey man I have my friend here passed out on a table and I have a knife in my hand ready to cut him open. How do I do a bypass surgery?"

Even I do not know where to start but the information is interference I have read and understood some general matters but the application information is not explained Explanation of how to use it and safety methods There are topics in general and studies only There is no explanation in the application It is dispersed information We need a topic how the application is and application guidance to benefit everyone from these interesting experiences I am waiting for you to create a topic on this

 

[DLD]

Good luck!

 

[Alhuwaidi]

Hello, I will attach pictures of the ultrasound machine. See where it is made in envelope, Made in China, American products are made in China

 

[Jackxxx]

Hello, I will attach pictures of the ultrasound machine. See where it is made in envelope, Made in China, American products are made in China

Yes but that is an American company not an chinese piece of shit company. Communist china has no quality control nor standards for safety. When it is an American or European company, those chinese people are just follow instructions for assembly. Still, American hands do a better job than chinese hands. Because chinese people are paid misery and live in frustration caused by socialism, while an American is well paid, love his job and enjoy his life in liberty and freedom.

iPhones are made in china too. But communist china cant make a phone without copying the technology from somebody else or without that phone exploding and killing the host.

 

[Alhuwaidi]

of the back of the tape label written on it was made in China, although I spoke with the factory today.

 

[Jackxxx]

Hello, I will attach pictures of the ultrasound machine. See where it is made in envelope, Made in China, American products are made in China

BTW, not all American products are made in china. In fact, the bombs and missiles that saved your country from Saddam Hussein in 1991 were proudly made in the USA from American materials.

 

[Jackxxx]

of the back of the tape label written on it was made in China, although I spoke with the factory today.

Yes but it is an American company, It not a communist chinese company. Day and night difference.

 

[Alhuwaidi]

Say an American What do you advise me? I told them to stop my order, Marek. Do you keep ordering?

 

[Jackxxx]

No, you dont need to stop that order. The Sound Care Plus is a good machine.
The ones that are bad are the ones that you find cheap in aliexpress or any of those chines hosts.

 

[Alhuwaidi]

Good. What is the trusted site to buy from Rasco company? The device does not sell only to distributors. Do you know a reliable site?

 

[Jackxxx]

Good. What is the trusted site to buy from Rasco company? The device does not sell only to distributors. Do you know a reliable site?

SoundCare Plus Professional Ultrasound Device | TENSPros

Thats the same place Manko's got it from.

 

[Alhuwaidi]

Yes that is they have discount code: save5

 

[DLD]

Yes but that is an American company not an chinese piece of shit company. Communist china has no quality control nor standards for safety. When it is an American or European company, those chinese people are just follow instructions for assembly. Still, American hands do a better job than chinese hands. Because chinese people are paid misery and live in frustration caused by socialism, while an American is well paid, love his job and enjoy his life in liberty and freedom.

iPhones are made in china too. But communist china cant make a phone without copying the technology from somebody else or without that phone exploding and killing the host.

Fuck China

 

[Alhuwaidi]

Hhhhhh

 

[Alhuwaidi]

He found a site that sells SoundCare for $712 with the discount application

 

[DLD]

He found a site that sells SoundCare for $712 with the discount application

Wow that is a lot of money! I can buy you the whole entire SRT package and then some!

 

[Alhuwaidi]

Wow that is a lot of money! I can buy you the whole entire SRT package and then some!

Yes, it is expensive, but the protocol you go to earn a week is 0.2 cm with this device

 

[DLD]

Yes, it is expensive, but the protocol you go to earn a week is 0.2 cm with this device

Please keep us updated on your progress

 

[Alhuwaidi]

When the device arrives and requests the SRT package, I will routinely include it in the coming months. I am collecting training tools now

 

[Alhuwaidi]

@Jackxxx
What is the thermometer or temperature probe that tests temperatures? Do you give me some information to test the temperatures during the session in order to see the results?

 

[Jackxxx]

@Jackxxx
What is the thermometer or temperature probe that tests temperatures? Do you give me some information to test the temperatures during the session in order to see the results?

There is currently no specific thermometer for that. You have to invent your own way to measure temperature.

For accurate reading, Kyrpa and Manko used an urethral probe. I am not sure if it is a tool they bought or they made. Either way, I am not interested in inserting probes in my dick to measure temp. I rather wait til somebody else does it, then I just copy the protocol.

Another way Kyrpa used to read temp, was by resting his dick against his leg while hanging and heating up, then sticking the thermometer between his dick and his leg. That reading is believed to directly correlate to the temperature inside the penis. Or at least very close. For that, you can use any digital thermometer. It will just slide between your leg and your dick. (eventually third leg)

 

[Alhuwaidi]

But this method does not give me penile temperature it gives me body temperature The method is not accurate to measure

 

[johnny-wang]

He found a site that sells SoundCare for $712 with the discount application

Did you buy it?

 

[Alhuwaidi]

Did you buy it?

About to buy why

 

[johnny-wang]

About to buy why

Just asking. From what I read in another forum most of them talked about a really cheap one( US Pro 2000 2nd Edition ). I am not sure about it, but maybe the guys here can confirm if its good or not. I am planing on buying one to get me past my plateau too.

 

[Alhuwaidi]

Just asking. From what I read in another forum most of them talked about a really cheap one( US Pro 2000 2nd Edition ). I am not sure about it, but maybe the guys here can confirm if its good or not. I am planing on buying one to get me past my plateau too.

You need two units to get results

 

[johnny-wang]

You need two units to get results

Not sure about that. Why do you think so though?

 

[Alhuwaidi]

Not sure about that. Why do you think so though?

If you are a beginner, read studies before entering the field of ultrasound to understand what is meant by heating. There are some articles in the forum to understand the goal of ultrasound.

 

[johnny-wang]

If you are a beginner, read studies before entering the field of ultrasound to understand what is meant by heating. There are some articles in the forum to understand the goal of ultrasound.

If you are talking about the frequency I think you can just buy one you can tune to the desired frequency between 1mhz and 3mhz not sure why you will need two?

 

[Jackxxx]

But this method does not give me penile temperature it gives me body temperature The method is not accurate to measure

Isn't your dick part of your body? If you want accurate temp then you need to build a urethral probe and stick it in while heating.

 

[Alhuwaidi]

Isn't your dick part of your body? If you want accurate temp then you need to build a urethral probe and stick it in while heating.

I think about this. I need a thermometer that enters the opening of the urethra. Where can I find all my numbers to measure the temperature of the meat, but this does not work? It causes wounds and pain.

 

[Alhuwaidi]

If you are talking about the frequency I think you can just buy one you can tune to the desired frequency between 1mhz and 3mhz not sure why you will need two?

Read Kyrpa and Manko articles Understanding what is meant and what is meant by ultrasound

 

[Jackxxx]

I think about this. I need a thermometer that enters the opening of the urethra. Where can I find all my numbers to measure the temperature of the meat, but this does not work? It causes wounds and pain.

No need to ask the same questions that have already being asked. Read Manko's thread in which he discuses the creation of an urethral probe and shares data with Kyrpa. You're asking the same questions in multiple forums.

 

[Alhuwaidi]

No need to ask the same questions that have already being asked. Read Manko's thread in which he discuses the creation of an urethral probe and shares data with Kyrpa. You're asking the same questions in multiple forums.

Yes, I ask the question in a multi-forum, because there was neither a description of the instruments used in the test nor an attachment to the equipment pictures. Just sayings on paper. This is not a nominal study for people who do not know what devices and equipment you do not know if one or two devices do not know the methods and foundations of the application Why? The reason for this is that the study was only documented with descriptions. There are no photos, videos, or equipment description only. Speak on paper with help. We do not know whether it is right or wrong. I am two people. So this is data and this is evidence for pictures and videos and these are all tools that were used in the selection. See all people ask the same question, why not all theoretical work? I hope the pictures link.

 

[DLD]

So much action in this thread!

 

[Alhuwaidi]

So much action in this thread!

Yas

 

[Jackxxx]

Yes, I ask the question in a multi-forum, because there was neither a description of the instruments used in the test nor an attachment to the equipment pictures. Just sayings on paper. This is not a nominal study for people who do not know what devices and equipment you do not know if one or two devices do not know the methods and foundations of the application Why? The reason for this is that the study was only documented with descriptions. There are no photos, videos, or equipment description only. Speak on paper with help. We do not know whether it is right or wrong. I am two people. So this is data and this is evidence for pictures and videos and these are all tools that were used in the selection. See all people ask the same question, why not all theoretical work? I hope the pictures link.

You should be thankful for the work these guys have made instead of demanding a quick guide with pictures and videos catered for you. Read all the threads, I did, and all the questions you ask are answered in those threads. These guys invented their own setups to make it work. Based on the explanation you should be able to do the same. Find parts online and build your own thermometer.

 

[Alhuwaidi]

You should be thankful for the work these guys have made instead of demanding a quick guide with pictures and videos catered for you. Read all the threads, I did, and all the questions you ask are answered in those threads. These guys invented their own setups to make it work. Based on the explanation you should be able to do the same. Find parts online and build your own thermometer.

I do not meet my special needs. Special needs. If you need them, I do not ask them in front of people. Special needs are requested in the special, not in the forums. I ask the question to obscure the benefit and not to meet my needs. As for people I have an experiment, I thank them from the bottom of my heart, but they are not inventors of the ultrasound machine, nor did they invent magic tools to enlarge on a specific day. . If you have a way, then the goal is like a puzzle. Say thank you guys and then go read the guide. I read the guide 59 pages from forums and 10 pages gained size and other pages I did not find one answer to the correct application of the device for the luck of people in the forum Why do they ask the same question !? I am able to do actions. I did not ask in the forums to explain that the explanations are incomprehensible to some people, according to my work and theory. If I need evidence quickly, I do not discuss with you on this issue. I ask me, trust and ask a question, if you cannot answer anyone, why do you raise a topic or study that my brother reserved for yourself if he is not able to answer the answers do not answer a word I do not know or do not know the question ends you have knowledge of theses but in the form of its concept and detailed explanation

 

[johnny-wang]

Read Kyrpa and Manko articles Understanding what is meant and what is meant by ultrasound

Man stop trying to sound overly knowledgeable about a subject you are clearly oblivious about.
You were just told to read those damn articles a page ago.
You should probably check the date I joined and stop trying to act like you invented ultrasound, I believe Longstretch created a thread here about way before you even joined the forum.

 

[A-Spot Spammer]

 

[Alhuwaidi]

Man stop trying to sound overly knowledgeable about a subject you are clearly oblivious about.
You were just told to read those damn articles a page ago.
You should probably check the date I joined and stop trying to act like you invented ultrasound, I believe Longstretch created a thread here about way before you even joined the forum.

What do you mean by tuning? And what do you want to adjust?

 

[DLD]

View attachment 1827405

 

[johnny-wang]

What do you mean by tuning? And what do you want to adjust?

I might be wrong, since I am yet to purchase one....but I remember reading somewhere that some US devices, especially the expensive ones have multi frequency range from 1Mh - 3Mhz and you can tune in between to select the frequency/intensity that best suits your needs.

 

[DutchAthletic92]

I might be wrong, since I am yet to purchase one....but I remember reading somewhere that some US devices, especially the expensive ones have multi frequency range from 1Mh - 3Mhz and you can tune in between to select the frequency/intensity that best suits your needs.

Yeah I think that’s the best option to have so one can adjust the frequency while heating the shaft. Maybe some people get enough heating with 1 Mh and others need 3 Mhz.

I think for myself I definitely need 3 Mhz because I am certain that I have a 3 layered THICK ass tunica that needs to get enlarged asap lol

 

[johnny-wang]

Yeah I think that’s the best option to have so one can adjust the frequency while heating the shaft. Maybe some people get enough heating with 1 hanger and others need 3 Mhz.

I think for myself I definitely need 3 Mhz because I am certain that I have a 3 layered THICK ass tunica that needs to get enlarged asap LOL

Haha! We all have that belief about the tunica. Man, I tell you sometimes I get frustrated to the point I'd yell stretch you damn thing! (cwl)

 

[A-Spot Spammer]

I might be wrong, since I am yet to purchase one....but I remember reading somewhere that some US devices, especially the expensive ones have multi frequency range from 1Mh - 3Mhz and you can tune in between to select the frequency/intensity that best suits your needs.

Yep, you can vary operating depths. The higher the frequency, the closer to the surface, so the lower the frequency the deeper the operating depth (according to the threads I’ve browsed that is.).

 

[Jackxxx]

Some things to clarify for all to understand. I had the same questions at some point, it gets confusing because it is a lot of shit to deal with.

- There are machines that are 1Mhz, others 3Mhz, others are both. The difference between 1 and 3Mhz is not how strong they are, but the depth they hit. It is believed conventionally that a 1Mhz machine will heat down to around 3.5 centimeters in depth, while the 3Mhz it is believed it targets tissues closer to the surface at around 1.5 centimeters. Now, this information is not solid final science, since there have been studies suggesting that the 3Mhz targets areas closer to the surface than believed before.

With that being said, it doesnt mean one machine will work better than the other. The 3Mhz will reach target temperature faster than the 1Mhz, but both will produce internal heat.

Because one targets deeper tan the other, it doesnt mean your surface will be cold while your bottom of the penis will be hot. Is not a laser beam, is sound waves. It targets a broad area and irradiate from there.

1Mhz machines come both as a desktop machine or as a portable transducer. The one Kyrpa used for his research is the portable US Pro 2000.

Desktop machines usually have controls that allow to fine tune potency. Not really critical for our purpose. he US Pro 2000 at "Hi" setting will provide the maximum output needed for this therapy, as demonstrated by Kyrpa in his research.