The lengthmaster is a great device, BUT....

[TopGainer]

The lengthmaster is awesome and the stretch and fatigue you get from it is second to none. I’ve figured out how to wrap and it doesn’t slip anymore. But there’s one problem. The 4 corners where your at the front once you’ve clamped the device on are staring to dig into my skin no matter how much wrap I use. It has put cuts into my skin and has begun to scab. Can anyone tell me how to deal with this?

 

[Getbiglonger7]

The skin gets cracked there are so many creams that can fix it tough,the guys here may have some know ledge about it

 

[DLD]

The lengthmaster is awesome and the stretch and fatigue you get from it is second to none. I’ve figured out how to wrap and it doesn’t slip anymore. But there’s one problem. The 4 corners where your at the front once you’ve clamped the device on are staring to dig into my skin no matter how much wrap I use. It has put cuts into my skin and has begun to scab. Can anyone tell me how to deal with this?

Have you tried using a sleeve? A SiliSleeve with a wrap of ace should remove that pressure.

 

[DLD]

If you decide on a SiliSleeve go for the Duro, much better for this job.

 

[TopGainer]

I’ll try the sleeve but honestly aside from the cuts if been getting, I love the LM, I’ve bought many other PE equipment because I don’t want to put down anyone’s intellectual property, but damn it’s a hell of a device...

 

[DLD]

I’ll try the sleeve but honestly aside from the cuts if been getting, I love the LM, I’ve bought many other PE equipment because I don’t want to put down anyone’s intellectual property, but damn it’s a hell of a device...

Well what we want to solve your issue as if it happened to you it may happen with someone else in the future so let’s figure it out the best we can and find a solution. I have never heard of this happening before but I am ready to help you find a way to fix it. Have you gone to the wrapping forum and looked at the various wrapping styles that have been posted?

 

[TopGainer]

I

Well what we want to solve your issue as if it happened to you it may happen with someone else in the future so let’s figure it out the best we can and find a solution. I have never heard of this happening before but I am ready to help you find a way to fix it. Have you gone to the wrapping forum and looked at the various wrapping styles that have been posted?

i have taken a glance but not gone in depth

 

[DLD]

I

i have taken a glance but not gone in depth

Give that a go you may find a form of wrapping that will solve this issue. In the meantime I will brainstorm some other ideas. We will solve this I promise you that.

 

[REDZULU2003]

Perhaps a future mod for the lengthmaster to address this.

 

[DLD]

Perhaps a future mod for the lengthmaster to address this.

I’ll be discussing that with lightning hopefully this evening. Definitely time to make some modifications.

 

[Getbiglonger7]

FUCKING GREAT!

 

[DLD]

FUCKING GREAT!

It’s time to make some changes and freshen things up.

 

[Getbiglonger7]

It’s time to make some changes and freshen things up.

A new n more powerful device

 

[TopGainer]

I believe the top of the bundle need more padding and the rear souls be able to tighten a bit more

 

[TopGainer]

Rear of the bundle *

 

[TopGainer]

@DLD I’ve been using 2 silicone sleeves, the grey theraband wrapped around it, and sorts wrap on top of that, yet I’m still getting snake bites a cuts on my shaft right underneath the glans :/

 

[longstretch]

How thick are you? Counter intuitive you might be using too much wrap. Why 2 sleeves

 

[TopGainer]

How thick are you? Counter intuitive you might be using too much wrap. Why 2 sleeves

5.75-6 but I’ve also tried less wrap, it’s the same thing,

 

[longstretch]

Ok what exactly and what lengths of wrap are you using? How are you tightening down? Be as detailed as possible. Why 2 sleeves?

 

[DLD]

Ok what exactly and what lengths of wrap are you using? How are you tightening down? Be as detailed as possible. Why 2 sleeves?

??

 

[Minceydice]

Has anyone ccombined a vacuum attachment with the lengthmaster. Like ththe lg hanger instead of the bundle part. Thought I saw some guy have this setup at one point. I feel like it would be the ultimate lengthmaster setup, as I've never been able to get a great wrap

 

[longstretch]

Someone did over at P. E gym so he could do bundled hanging and manual vacuum stretches. You would need to have your wrap/taping down and be accustomed to vacuum to pull it off.

 

[DLD]

Has anyone ccombined a vacuum attachment with the lengthmaster. Like ththe lg hanger instead of the bundle part. Thought I saw some guy have this setup at one point. I feel like it would be the ultimate lengthmaster setup, as I've never been able to get a great wrap

Do it! Sounds extremely powerful and I’d love to see the set up. As soon as you have it done please shoot some pictures so we can see.

 

[Brawn Johnson]

I believe the top of the bundle need more padding and the rear souls be able to tighten a bit more

If I understand the problem correctly, Top, you're spot on here. The chamber has four corners in contact with your dick, but only two screws. The screws put all the pressure along one side of the chamber, so it applies most of the force along the line on one side of the chamber, rather than along both sides. That is, the little rubber chamber isn't all coming down evenly along your shaft. One SIDE of that chamber is biting down while the other is just sort of dragged along for the ride.

If you add two more screws to the other side of the chamber it should apply force more evenly. DLD mentioned this to me, that another member had done just that and it apparently made a world of difference to the comfort level. I've just been too lazy to do it myself and now I'm using the SiliStretcher instead.

 

[Minceydice]

If I understand the problem correctly, Top, you're spot on here. The chamber has four corners in contact with your dick, but only two screws. The screws put all the pressure along one side of the chamber, so it applies most of the force along the line on one side of the chamber, rather than along both sides. That is, the little rubber chamber isn't all coming down evenly along your shaft. One SIDE of that chamber is biting down while the other is just sort of dragged along for the ride.

If you add two more screws to the other side of the chamber it should apply force more evenly. DLD mentioned this to me, that another member had done just that and it apparently made a world of difference to the comfort level. I've just been too lazy to do it myself and now I'm using the SiliStretcher instead.

I would honestly pay for someone to do this. I'd pay MoS to add this modification to mine.

 

[DLD]

I would honestly pay for someone to do this. I'd pay MoS to add this modification to mine.

You can order a new chamber in a couple weeks when we have the modification done from the factory.

 

[Minceydice]

You can order a new chamber in a couple weeks when we have the modification done from the factory.

Fantastic , this will make the lengthmaster so much more comfortable. I love this device and I cant wait to see it get an upgrade. Marked on my calendar hehe

 

[DLD]

Fantastic , this will make the lengthmaster so much more comfortable. I love this device and I cant wait to see it get an upgrade. Marked on my calendar hehe

That’s my baby and she’s almost 15 years old!

 

[Brawn Johnson]

You can order a new chamber in a couple weeks when we have the modification done from the factory.

Always improving!

 

[DLD]

Always improving!

Whenever we can afford it we put it right back into making things better

 

[TopGainer]

When is the change to the bundle coming into effect ?

 

[DLD]

When is the change to the bundle coming into effect ?

All new Lengthmasters will have the modification.

 

[Minceydice]

All new Lengthmasters will have the modification.

can i pay for the new bundle right now and receive it ?

 

[DLD]

can i pay for the new bundle right now and receive it ?

No, this will be a change in future models. When it is available we will announce. The forum modification is awesome and it’s free so why not try that?

 

[TopGainer]

When is the change coming? I’d like to buy it ASAP

 

[REDZULU2003]

Probably a few months

 

[TopGainer]

I FINALLY LEARNED HOW TO WRAP WITH THE LENGTHMASTER!! NO MORE SCARRING! But starting to have fluid build up...

 

[DLD]

I FINALLY LEARNED HOW TO WRAP WITH THE LENGTHMASTER!! NO MORE SCARRING! But starting to have fluid build up...

Praise Jesus! Wow, such good news!

 

[TopGainer]

Praise Jesus! Wow, such good news!

Honestly the fluid thing isn’t to big of an issue, because you can just jelq it out, but is there a way to avoid it?

 

[DLD]

Honestly the fluid thing isn’t to big of an issue, because you can just jelq it out, but is there a way to avoid it?

Just before you strap in be sure to squeeze as much blood out of your head as possible this way there won’t be fluid pushing against your head when you’re stretching as this is where the fluid retention comes from. So squeeze as much bald out as possible and you’ll have a much easier time.

 

[Hung-Honcho]

No, this will be a change in future models. When it is available we will announce. The forum modification is awesome and it’s free so why not try that?

So would it be wise to buy the length master now or to wait until the modification is done?

 

[DLD]

So would it be wise to buy the length master now or to wait until the modification is done?

Buy it now and you’ll get the upgrade want to comes out free.

 

[DutchAthletic92]

Buy it now and you’ll get the upgrade want to comes out free.

What is this new lengthmaster modification about?
What exactly will be improved ? What are the effects?

I’m gonna buy me that new lengthmaster when it comes out!

 

[Brawn Johnson]

What is this new lengthmaster modification about?
What exactly will be improved ? What are the effects?

The chamber has four corners in contact with your dick, but only two screws. The screws put all the pressure along one side of the chamber, so it applies most of the force along the line on one side of the chamber, rather than along both sides. That is, the little rubber chamber isn't all coming down evenly along your shaft. One SIDE of that chamber is biting down while the other is just sort of dragged along for the ride.

If you add two more screws to the other side of the chamber it should apply force more evenly. DLD mentioned this to me, that another member had done just that and it apparently made a world of difference to the comfort level.

I believe MoS is planning to add the two new screws to the LM chamber so that it becomes much safer and more comfortable!

 

[DLD]

I believe MoS is planning to add the two new screws to the LM chamber so that it becomes much safer and more comfortable!

Yes all new orders will come out that way.

 

[Hung-Honcho]

Yes all new orders will come out that way.

So if I place an order for the length master now, I would get it with the new modifications?

 

[DLD]

So if I place an order for the length master now, I would get it with the new modifications?

Gimme a minute seeing the status now.

 

[Hung-Honcho]

Gimme a minute seeing the status now.

Ok waiting for your update

 

[DLD]

Ok waiting for your update

Yes every new Lengthmaster has the new modification

 

[Hung-Honcho]

Yes every new Lengthmaster has the new modification

Can we see pics of the modifications on the new LM?