I was manually stretching before i purchased the silistretcher and felt a slight for on the base the day after. Not with the silistretcher, I am hanging using 7 pounds, for an hour a day. sometimes a little more. Am i doing something wrong? any advice would be appreciated.
silistretcher not giving me soreness
- Thread starter dxmklcd
- Start date
-
- Tags
- silistretcher
Soreness is not something that sticks around, it’s something that happens in the first few months of PE then after that it’ll fade away but that has no bearing on if your gains come or not. If you feel as though you can handle more weight then I suggest you add more weight. You always want to push the envelope when hanging.
Which of the sleeves did you buy?
No siliscale, this is at a good tug on it for most of the time. Switched to silistrap rather than side wearing with belt for more pull.
I've worn traction extenders, but only for a few weeks because I can't stand nooses nor straps. The amount of force I'm using is comparable to the what is at medium, more often higher setting. (I want to guess somewhere around 1500-2500)
I am new to hanging, (only up to 5lbs so far) but I feel as if my experience with that also helps me in being able to gauge how much tension to keep as well. It feels about the same as 3lbs, maybe 4lbs when I increase it up on the silistrap.
That said, I would be curious to see what the siliscale values would be for my mean tension throughout the day.
Do you feel like the ss is not working for you
Do you have the Blue Sleeves or the Transparent Duros? The Duros are made for heavier weight and tension. The blue sleeves were originally intended for anti-turtling and pumping then were originally used for the first edition SiliStretcher.
It is working for me. I feel a great amount of pull, with the silistrap I have now. If anything I may need to lessen the tension a bit in the afternoon to allow for harder erections for my evening bathmate sessions. Today is just to the side with the belt to test and testing seeing what the result is. (After hanging this morning)
The Silistretcher is so much more comfortable than the PF and all traction devices that I've used, that I find "soreness" to be too strong a word for my experiences with it. It outright feels good in comparison. If I'm uncomfortable, it can easily be adjusted.
Are you guys still sending the duros for the people who originally bought the silistretcher? I never got mine
Yes, just send an email with your name and details to [email protected] to get a complimentary set.
The SiliStretcher without using the Duro sleeves is not going to be able to handle much weight. Blue sleeves were not intended to handle this much weight so lightning designed a sleeve that is able to handle heavier weight, I suggest trying the Duro sleeve and you’ll find all the difference in the world
REDZULU2003
Well-known member
You dont want to be feeling sore, if you felt sore wearing it then the thing isnt a good device.
When using silistretcher as ADS, or with weight you will feel some obvious discomfort, but soreness is something you never aim for.
I'm going to be taking pictures very soon of the silistretcher showing its force on the siliscale compared with the phallosan. With the phallosan for example it has a green, yellow, and red color gauge for the user to see how the intensity is ... I will show using siliscale on a phallosan that the silistretcher is stronger.
This demo isnt on a penis, but simply me pulling one end attached to the devices.
When using silistretcher as ADS, or with weight you will feel some obvious discomfort, but soreness is something you never aim for.
I'm going to be taking pictures very soon of the silistretcher showing its force on the siliscale compared with the phallosan. With the phallosan for example it has a green, yellow, and red color gauge for the user to see how the intensity is ... I will show using siliscale on a phallosan that the silistretcher is stronger.
This demo isnt on a penis, but simply me pulling one end attached to the devices.
REDZULU2003
Well-known member
Just to clarify this, you do want to feel fatigued and you want to ride that fatigue as long as possible. Fatigue feels like soreness but not pain.
Let me also clarify that soreness or fatigue may not always be present it has everything to do with how much your training and how intense those exercises are more tools for that matter.
This may be a smart introduction into this. But I want to really emphasize that the penis will not always feel sore after a workout. The soreness as it will dissipate and eventually disappear for good.
But the duros are very hard to keep on right.. then what to do. Can any one suggest alternate to ssillicap ..
Thank u
@Mywish what are you trying to achieve with Silicap or what is the issue you are having with Silicap?
Putting a small pinhole or cut (slit) on the tip of the Silicap may prevent fluid build up or slippage of Silicap.
Also try rolling it on the glans like a condom instead of pulling it over.
There is another Silipad (Silipad2) that is going to be coming out soon that may eliminate the use of the Silicap.
REDZULU2003
Well-known member
The duros are not difficult to keep on right.
What are you struggling with?
What are you struggling with?
Same ?
I should try to keep a pinhole on the top of the sillicap....
It's difficult to rool like a condom.
I'm (cut not xatly) bt my foreskin moves freely top to last (completely behind the glans). That's what making the problem while using the silicap ( infact the glans is sour and I cld see a lil blisters , water retention and lil swelling beneath the glans ..,that's making me uncomfortable ..
Silipad 2 I shld wait fr few other products to come brothers..cause it had to be shipped to India..?...
I feel its lil hard to use the duros..I'm having trouble using it ..
Can some one show me a link to see any video if available to see how to ,
using the duros on real penis (not the dildo)..
Thank you
I am not sure if we have a video of this. Maybe @Lightning may know different. If not I’m sure somebody could make one.
edit added 10/10/19
If you want additional comfort or have fluid issues on the tip of the glans when using Silistretcher try using absolute water proof tape on the tip of the glans to cover urethra.
Cut about 1 inch of tape and apply it to the tip of urethra. Start at bottom of glans where frenelum meets glans and then tape up to cover urethra. You may need less or more tape.
**********Warning********** make sure before you apply the cut piece of tape to glans that you apply it to your hand and pull off multiple times. What you are doing is removing some of the adhesive before applying to glans or when you take it off you may hurt yourself.
After you apply the tape apply the Silicap.
View attachment 1824857
View attachment 1824856
The white round piece you notice I picked up at Walmart, but I’m sure you can find it Walgreens, CVS, etc. It is a round sponge for make up...LOL
Take the round sponge and cut it to size so that it fits inside Silipad2.
When you enter the Silistretcher push glans into the sponge. Read on.
View attachment 1824858
I hope this will helps.
Ensure you have put a small pinhole in the Silicap or cut a small slit on the tip of Silicap a few millimeters to help minimize fluid build up on the tip of glans.
Roll Silicap like this then roll onto the glans like a condom.
Hold any foreskin from going forward so it is not trapped under Silicap.
If forskin get a bit trapped under Silicap,
pull Silicap slightly up on edge and pull foreskin back a bit at a time.
After Silicap is on you can also put paper tape once around the bottom edge of the Silicap to prevent fluid retention on the glans where the shaft meets.
Notice I said over the Silicap.
If you are sensitive to adhesive this will prevent it from being directly over the skin.
View attachment 1822384
For Duros with Silistretcher this is what I do,
Put Silipad in Silistretcher
and twist on piston until it stops don’t overtighten
Now turn left 1/2 turn
Put Duro onto Silistretcher
View attachment 1822385
Then fold Duro sleeve from bottom outward about 1/2 inch then again and again about 3 times until Duro looks like a donut
View attachment 1822386
Take donut and roll over Silistretcher one more time so that it is over the lip of Silistretcher cup.
View attachment 1822387
Insert penis with Silicap on into Silistretcher.
Press into Silipad really good with glans.
Make sure you pull forskin back towards testicles, so it doesn’t get caught in the duro.
Now roll donut down onto the shaft and keep rolling until it is completely unrolled.
View attachment 1822388
View attachment 1822389
Adjust slightly and turn piston 1/4 to 1/2 turn to the right.
You should now be set to attach to the belt or to the Silistrap.
I prefer the Silistrap with Silistretcher pointing up towards chest.
Just be patient and keep trying.
If you want additional comfort or have fluid issues on the tip of the glans when using Silistretcher try using absolute water proof tape on the tip of the glans to cover urethra.
Cut about 1 inch of tape and apply it to the tip of urethra. Start at bottom of glans where frenelum meets glans and then tape up to cover urethra. You may need less or more tape.
**********Warning********** make sure before you apply the cut piece of tape to glans that you apply it to your hand and pull off multiple times. What you are doing is removing some of the adhesive before applying to glans or when you take it off you may hurt yourself.
After you apply the tape apply the Silicap.
View attachment 1824857
View attachment 1824856
The white round piece you notice I picked up at Walmart, but I’m sure you can find it Walgreens, CVS, etc. It is a round sponge for make up...LOL
Take the round sponge and cut it to size so that it fits inside Silipad2.
When you enter the Silistretcher push glans into the sponge. Read on.
View attachment 1824858
I hope this will helps.
Ensure you have put a small pinhole in the Silicap or cut a small slit on the tip of Silicap a few millimeters to help minimize fluid build up on the tip of glans.
Roll Silicap like this then roll onto the glans like a condom.
Hold any foreskin from going forward so it is not trapped under Silicap.
If forskin get a bit trapped under Silicap,
pull Silicap slightly up on edge and pull foreskin back a bit at a time.
After Silicap is on you can also put paper tape once around the bottom edge of the Silicap to prevent fluid retention on the glans where the shaft meets.
Notice I said over the Silicap.
If you are sensitive to adhesive this will prevent it from being directly over the skin.
View attachment 1822384
For Duros with Silistretcher this is what I do,
Put Silipad in Silistretcher
and twist on piston until it stops don’t overtighten
Now turn left 1/2 turn
Put Duro onto Silistretcher
View attachment 1822385
Then fold Duro sleeve from bottom outward about 1/2 inch then again and again about 3 times until Duro looks like a donut
View attachment 1822386
Take donut and roll over Silistretcher one more time so that it is over the lip of Silistretcher cup.
View attachment 1822387
Insert penis with Silicap on into Silistretcher.
Press into Silipad really good with glans.
Make sure you pull forskin back towards testicles, so it doesn’t get caught in the duro.
Now roll donut down onto the shaft and keep rolling until it is completely unrolled.
View attachment 1822388
View attachment 1822389
Adjust slightly and turn piston 1/4 to 1/2 turn to the right.
You should now be set to attach to the belt or to the Silistrap.
I prefer the Silistrap with Silistretcher pointing up towards chest.
Just be patient and keep trying.
Last edited:
Thank you brother...
Bt duro sleeve is hard to roll back and keep the glans in the stretcher and again pulling back the sleeve too.
Bt vil give a try for it ..today or tomorrow very soon .
Bt duro sleeve is hard to roll back and keep the glans in the stretcher and again pulling back the sleeve too.
Bt vil give a try for it ..today or tomorrow very soon .
REDZULU2003
Well-known member
I can't for the life of me see how it's so difficult. The dildo is same principle to a penis, watch carefully, and think how condoms get applied.
Yes bro bt ..wearing the ADS is not that easy ..its painfull too ..
Cldnt use it for longer time continuously..
Duros I cut the length of it to use it
If you have pain, you are using it wrong. If you are new to PE, your penis may be very sensitive and you need to pre-condition your penis by slowly advancing time used, tension and/or weight over the course of a few weeks.
Start by applying the SiliStretcher with light tension and wearing an hour a day for a week. Week two, start slowly increasing the hours worn until you can get up to a few hours. By week 3 or 4 you should be wearing it 6 hours a day no problem. Then start applying tension slowly every week after.
The DuroSleevs will eventually break in and once you get into the groove of using them, it will be a natural thing.
I can attest to this methodology...
...I wore mine too much the first day I used it and developed a severe blister and it set me back a week so far.
REDZULU2003
Well-known member
Thanks fr the advice bt I'm not new to PE bro ..doing it regularly since years.
Bt not in a specified way..
Silly stretcher is new to me bt not the tension and weights ..
Yes brother people here are responding in a good way and explaining everything wth very patience..
I dnt hav any issues hanging wth stretcher brother.
Bt using it as ADS ..
I'm documenting all my routine daily in mobile .
Using the stretcher walking with Jean pant. Driving the bike etc ...
Hope I reach my goal
Wth the brothers support ,out there ...
Good to hear my brother! Just keep good track of what you’re doing and the growth you’re making and you’ll have a great record look back on.
Same
Hello brother, you've been away for far too long. I'm hoping you have not given up on PE.
