Questions

[iGrowSteady]

Anywho.

 

[arkailija]

Finally +1, I've been able to place each part for use except one… It’s a smaller strap with two silver clips at the end, so I’m wondering what that’s for. Either way great stuff and look forward to getting this integrated into my routine!

That I can clarify, it's the Silistrap ! You can use it stretch upwards for example. Maybe it could be utilized in expressive stretching, just a silly thought.

I don't have experience sleeping with the device on, I am a restless sleeper so I time my PE stuff to awake hours. Anyway, sounds like pointing up might be the best bet. Maybe I'll try it one night, no promises though.

A circulation / vacuum thing, yes. That's why I mainly do awake hour PE, as in not to risk too much.

Usually length before girth, therefore Silistretcher before Bathmate use. After a BM session your flaccid can be quite big and therefore using the Silistretcher could be tough. I am not sure if @REDZULU2003 has tried it yet?
To be honest, I just put on the Silistrap, have the device pointing up, had a BM session few hours ago.
So while it's good to make questions, no Brother should be shy to test things that might seem great. (With own comfort and care of course, don't go breaking yourselves!)

Hard to say if I made any sense this time.
All in all, wishing you the best of gains, thanks for the report!

 

[REDZULU2003]

So does anyone have any experience with sleeping in it, outside of the threads already here? Position, time, etc?

I have some experience. Slept with it attached to a length of material attached to a 2.5kg plate over the edge of the bed. Siliscale had it with a force of 1.7-1.9kg which is due to the bed taking some of the weight, which isn't a problem here as I wanted to hang lightly like that, and see how it went.

Managed 4 hours straight. I removed it then due to some discomfort. I'm uncut, which can be a battle with some equipment. Foreskin doesn't always like playing ball. I had it pulled back before entering, had a silipad in place.

In future I will use silicap, the softer silipad.

No damage to the penis, just a slight indentation where the glans had pressed against the inside.

Wouldn't recommend this approach with anything over 7kg as more weight will equal more pressure inside this device, which could give more problems like swelling. Lets see.

For obvious reasons, back only.

I have used the silistretcher attached to my leg, and straight up with the silistrap while in the bed. This worked fine at first, while you are in a good position. Not the fault of the device, but the way the human moves at night. If attached to the leg, the leg needs to be at constant tension, hence why the idea came to hang weight over the edge of the bed - constant tension.

It has merits. The straight up was best, but I was restless sleeping that night. I dont sleep well at the moment to be honest.

Also, the head of my glans was a little cold, which is a circulation thing right?

It could be, it could be not. Depends on other variables, such as temperature at the time.
I would hazard a guess that its down to circulation though.

Also, is it a good idea to hang after the Bathmate ? Again if so for about how long? And what’s a good maximum weight, that gets you best workout but won’t cause issues \ damage?

Its personal choice on this. Mainstream penis enlargement recommends doing the hanging before bathmate. I will be hanging after pumping in the future routine I begin, due to the way pumping works internally, in my view if pumping is done correctly to target length (in my case) via the correct cylinder, then hanging afterwards it should be a nice combo.

I would stick to hanging before the bathmate, as I have taken ages to select the correct cylinder to focus on length, the precise pressure for certain length of time etc.

 

[DLD]

I have some experience. Slept with it attached to a length of material attached to a 2.5kg plate over the edge of the bed. Siliscale had it with a force of 1.7-1.9kg which is due to the bed taking some of the weight, which isn't a problem here as I wanted to hang lightly like that, and see how it went.

Managed 4 hours straight. I removed it then due to some discomfort. I'm uncut, which can be a battle with some equipment. Foreskin doesn't always like playing ball. I had it pulled back before entering, had a silipad in place.

In future I will use silicap, the softer silipad.

No damage to the penis, just a slight indentation where the glans had pressed against the inside.

Wouldn't recommend this approach with anything over 7kg as more weight will equal more pressure inside this device, which could give more problems like swelling. Lets see.

For obvious reasons, back only.

I have used the silistretcher attached to my leg, and straight up while in the bed. This worked fine at first, while you are in a good position. Not the fault of the device, but the way the human moves at night. If attached to the leg, the leg needs to be at constant tension, hence why the idea came to hang weight over the edge of the bed - constant tension.

It has merits. The straight up was best, but I was restless sleeping that night. I dont sleep well at the moment to be honest.



It could be, it could be not. Depends on other variables, such as temperature at the time.
I would hazard a guess that its down to circulation though.



Its personal choice on this. Mainstream penis enlargement recommends doing the hanging before bathmate. I will be hanging after pumping in the future routine I begin, due to the way pumping works internally, in my view if pumping is done correctly to target length (in my case) via the correct cylinder, then hanging afterwards it should be a nice combo.

I would stick to hanging before the bathmate, as I have taken ages to select the correct cylinder to focus on length, the precise pressure for certain length of time etc.

This is a very good point you’re making and I’m gonna accentuate that. The main stream norm is to do length before girth. This makes sense because it’s difficult to stretch the penis after it is been expanded. But I also think it’s important to train length after girth once or twice a week because the exercise is something completely different. The reason that we want to do girth before length every now and again if so we can cement and build on erectile tissue.

Anybody can read more about this in SRT

 

[DLD]

@arkailija – Ha, thank you; I obviously wasn’t what it was and then it dawned on me when you said so! (And ironically saw pictures of it in use on MOS’s FB!) But yeah, I’m not a good sleeper either and haven’t tried it since the other day, but may do so tonight.

As for the circulation issue, I’ll have to either use it during the day and see and or set an alarm during the night to check. I never had those issues with the PF though so hopefully it was a fluke. But yes, the only way we can learn and help ourselves is to try things, but safely of course!

Good stuff though, and no you made fine sense believe me; I think the same thing myself especially when it comes to PEing.

@REDZULU2003 – Okay cool, very interesting too, as it sounds like you have quite the setup! But sure, it seems like going up will the easiest to sleep with and hopefully cause the least amount of issues, if any. Temp wise yeah, like you said it could just have been that example at that time or not, but I’ll keep any eye either way!

Also interesting again about what you say about hanging and BM use… Honestly after PEing earlier in the night, going to the gym with a CR and sleeve on, and then BMing, my guy really needs a break… But the question is, how close to using the BM should I hang before? As it is there’s usually two to four hours in between manuals and the BM, so if I hang for fifteen before manuals, is that too much time in between or should I hang right before I use the BM in the tub?

@DLD - Etc \ So with everything I'm doing now and from what I'm reading, a lot of weight really isn't necessary is it?

Exactly correct

 

[DLD]

@DLD - Then I'll stick with what came with the stretcher, 2.5lbs right? (Sorry, I'm out right now!)

Start with what you have that sounds fine and as you are able to add weight do so. You can buy more from our store or you can probably get them even less expensive at a sporting good store. Work with what you have until you have what you need.

 

[REDZULU2003]

@arkailija – Ha, thank you; I obviously wasn’t what it was and then it dawned on me when you said so! (And ironically saw pictures of it in use on MOS’s FB!) But yeah, I’m not a good sleeper either and haven’t tried it since the other day, but may do so tonight.

As for the circulation issue, I’ll have to either use it during the day and see and or set an alarm during the night to check. I never had those issues with the PF though so hopefully it was a fluke. But yes, the only way we can learn and help ourselves is to try things, but safely of course!

Good stuff though, and no you made fine sense believe me; I think the same thing myself especially when it comes to PEing.

@REDZULU2003 – Okay cool, very interesting too, as it sounds like you have quite the setup! But sure, it seems like going up will the easiest to sleep with and hopefully cause the least amount of issues, if any. Temp wise yeah, like you said it could just have been that example at that time or not, but I’ll keep any eye either way!

Also interesting again about what you say about hanging and BM use… Honestly after PEing earlier in the night, going to the gym with a CR and sleeve on, and then BMing, my guy really needs a break… But the question is, how close to using the BM should I hang before? As it is there’s usually two to four hours in between manuals and the BM, so if I hang for fifteen before manuals, is that too much time in between or should I hang right before I use the BM in the tub?

@DLD - Etc \ So with everything I'm doing now and from what I'm reading, a lot of weight really isn't necessary is it?

I would hang right before, and see how you feel with that.

 

[DLD]

Hey, thought I'd update this thread instead of creating a new one... I'm primarily using the stretcher with the weights now and beginning to wear it somewhat regularly at night. The latter is no problem with slippage, but the former exercise using the weights I'm having slippage issues. I'm getting a new set of sleeves that are better for the weights, but I just want to make sure that's the issue I'm experiencing.

I've tried it with the cap and without, using the powder and not, going halfway in and all the way in, and either way it keeps slipping... Sometimes it'll last longer, but it still eventually comes down. This is only recent as I didn't have these issues at first, and even when I upped the weight for the first time last week there was no slippage. Either way curious about your thoughts, so thanks in advance!

The new stronger sleeves are the solution to these issues. The SiliStretcher was created to handle about 10 pounds. With the SiliStretcher2 and the new sleeves men are able to hang even more weight. So I suggest grabbing the new sleeve giving a try and let us know the results.