Having problems with my x30 .. HELP!

I

IneedInches

0
Hey guys, i have a problem with my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x30[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]hydromax[/words]...

I started out using with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Comfort pad[/words] and it was OK until it made me injure my back while trying to squeeze water out. Its really tough to squeeze the water out with that long cylindrical tube of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words].

I then switched to non-comfort pad pumping and it was great. Great expansion and easier to squeeze the water out of the pump. But now i'm getting these water blisters at the base of my penis after an intense session. Today I drew blood from one of the water blister after my session. I think because the rubber tube causes some pinching on the skin.

Now i'm thinking of modifying my stock [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words] and dremel off the extended tube part. Has anyone ever had these problems? Any Advice appreciated!
 
IneedInches;763604 said:
Hey guys, i have a problem with my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x30[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]hydromax[/words]...

I started out using with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Comfort pad[/words] and it was OK until it made me injure my back while trying to squeeze water out. Its really tough to squeeze the water out with that long cylindrical tube of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words].

I then switched to non-comfort pad pumping and it was great. Great expansion and easier to squeeze the water out of the pump. But now i'm getting these water blisters at the base of my penis after an intense session. Today I drew blood from one of the water blister after my session. I think because the rubber tube causes some pinching on the skin.

Now i'm thinking of modifying my stock [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words] and dremel off the extended tube part. Has anyone ever had these problems? Any Advice appreciated!
Click to expand...

I think your skin needs to adapt to the way the pressure feels without the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words]. Though I have never had this type of problem before but I will suggest, you take a few days off until the blisters are gone and then resume your session with less pressure. Your penis just need to adapt to the pressure now that you are no longer using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words].
 
Eb75;763616 said:
You may need to lower the intensity and see how that fairs for you. Are you getting bad gator bite?
Click to expand...

So rare I hear about [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] bites anymore, strange.
 
here are a few tricks that may help you...

try using a 'higher-end' hair conditioner along the shaft and base...this will help with the seal and alleviate any [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words]-bite since the shaft skin will be lubricated and slide instead of pinch.
MOD YOUR [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X30[/words]! Get The Vacuvin...this will allow you to easily modulate pressure and it also increases the power 3-4 times over stock (plus, you won't ruin your back trying to force it anymore)
try turning the cylinder 180* so the sticker is pointing away from you...sometimes this angle will help w/gaiter-bite, as well.
good luck
 
doublelongdaddy;763662 said:
So rare I hear about [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] bites anymore, strange.
Click to expand...
I personally no longer get gator bite, helps having a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] & [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words]. But I kept my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X30[/words] for keeps sake.
 
Eb75;763616 said:
You may need to lower the intensity and see how that fairs for you. Are you getting bad gator bite?
Click to expand...

I like my current intensity but i think i went a little over the limit this time... went for 3x 10 mins pumping and i guess my skin couldnt hang



Big Schwanz Acht;763673 said:
here are a few tricks that may help you...

try using a 'higher-end' hair conditioner along the shaft and base...this will help with the seal and alleviate any [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words]-bite since the shaft skin will be lubricated and slide instead of pinch.
MOD YOUR [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X30[/words]! Get The Vacuvin...this will allow you to easily modulate pressure and it also increases the power 3-4 times over stock (plus, you won't ruin your back trying to force it anymore)
try turning the cylinder 180* so the sticker is pointing away from you...sometimes this angle will help w/gaiter-bite, as well.
good luck
Click to expand...

Thanks much, i will look into modding my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]bathmate[/words] next with the Vacuvin. As for the time being, i think i still have to address the issue with the base of the pump squeezing my skin too hard. I'll modify my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words] to only keep the base part.

Edit: Does hair conditioner or lube cause any kind of issues for the valve?
 
Last edited:
I agree with what others have said. Let the blisters heal and then go back at it with lower intensity to start with. I had a similar problem but not to the point of causing blisters. I started using a higher end conditioner and it allowed more lubrication between my skin and the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] folds. Would your current size allow you to move up to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]? Once I started using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] it completely eliminated the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] bite. I do have to pay closer attention to my balls getting sucked in but I have experimented with full package pumping and this eliminates that as well
 
Lookn4girth;763701 said:
I agree with what others have said. Let the blisters heal and then go back at it with lower intensity to start with. I had a similar problem but not to the point of causing blisters. I started using a higher end conditioner and it allowed more lubrication between my skin and the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] folds. Would your current size allow you to move up to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]? Once I started using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] it completely eliminated the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] bite. I do have to pay closer attention to my balls getting sucked in but I have experimented with full package pumping and this eliminates that as well
Click to expand...



I could move up to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] if all else fails...

do you use your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] with or without the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Comfort pad[/words]?

Also, i agree, i have to slow down and let it heal but damn.... dont wanna lose momentum
 
IneedInches;763700 said:
Edit: Does hair conditioner or lube cause any kind of issues for the valve?
Click to expand...

The beauty of hair conditioner is the fact that it's water soluble...rinse with hot water and you're good-to-go
 
Big Schwanz Acht;763673 said:
here are a few tricks that may help you...

try using a 'higher-end' hair conditioner along the shaft and base...this will help with the seal and alleviate any [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words]-bite since the shaft skin will be lubricated and slide instead of pinch.
MOD YOUR [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X30[/words]! Get The Vacuvin...this will allow you to easily modulate pressure and it also increases the power 3-4 times over stock (plus, you won't ruin your back trying to force it anymore)
try turning the cylinder 180* so the sticker is pointing away from you...sometimes this angle will help w/gaiter-bite, as well.
good luck
Click to expand...

I think your suggestion might help with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] bite I experienced while using my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words]. I will have to give it a try when I resume girth work next year but also, I will buy the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] for an upgrade.
 
Big Schwanz Acht;763706 said:
The beauty of hair conditioner is the fact that it's water soluble...rinse with hot water and you're good-to-go
Click to expand...

Water based conditioners will always be easiest to remove. If using vaseline or any other oil based product will clog the valve very quickly so in those cases be sure to completely clean your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BathMate[/words] after each session. If you do not the valve will become blocked and your pump will be in poor working condition.
 
UPDATE: Today was my first session after modifying my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words] to cut off the tube portion, and i'd like to report that it was much success! I pumped at maybe 90% intensity and the water blister i have was unharmed. No skin damage at the base and pumping the water out was as easy as without [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words]. I did try a little hair conditioner at the base but seems it is unnecessary with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words]. I will look into modifying my pump with the Vacuvin later on.

Thank you all for your inputs :blush:
 
doublelongdaddy;763778 said:
Water based conditioners will always be easiest to remove. If using vaseline or any other oil based product will clog the valve very quickly so in those cases be sure to completely clean your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BathMate[/words] after each session. If you do not the valve will become blocked and your pump will be in poor working condition.
Click to expand...

I need to stop using Vaseline and wash my pump very well when next I want to resume girth work.
 
huge-girth;763853 said:
I need to stop using Vaseline and wash my pump very well when next I want to resume girth work.
Click to expand...

Oil will eventually clog the valve and you will get no vacuum. After using oil based products be sure to completely clean the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BathMate[/words], valve and all. Maintenance of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BathMate[/words] is vital to its effectiveness.
 
doublelongdaddy;763985 said:
Oil will eventually clog the valve and you will get no vacuum. After using oil based products be sure to completely clean the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BathMate[/words], valve and all. Maintenance of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BathMate[/words] is vital to its effectiveness.
Click to expand...

I'm surely going to clean my pump
 
IneedInches;763827 said:
UPDATE: Today was my first session after modifying my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words] to cut off the tube portion, and i'd like to report that it was much success! I pumped at maybe 90% intensity and the water blister i have was unharmed. No skin damage at the base and pumping the water out was as easy as without [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words]. I did try a little hair conditioner at the base but seems it is unnecessary with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words]. I will look into modifying my pump with the Vacuvin later on.

Thank you all for your inputs :blush:
Click to expand...

My input? Praise the Lord you got this shit to work! I am very proud of you , as I am of every Brother, for finding a way no matter what. There is much individuality to PE as our penis's are all different in shape and size. Many times personal modification is necessary, with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BathMate[/words] that is very true. Now that you have this perfected, perfect the Vin-Vac and your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BathMate[/words] will be super-charged!
 
With such accomplishment, I expect you to stay consistent with your routine and get those needed girth gains :)
 
doublelongdaddy;764083 said:
My input? Praise the Lord you got this shit to work! I am very proud of you , as I am of every Brother, for finding a way no matter what. There is much individuality to PE as our penis's are all different in shape and size. Many times personal modification is necessary, with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BathMate[/words] that is very true. Now that you have this perfected, perfect the Vin-Vac and your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]BathMate[/words] will be super-charged!
Click to expand...

Thanks DLD! Praise the lord for this website, which got me into PE 10 years ago (time fucking flies! wtf).



huge-girth;764169 said:
With such accomplishment, I expect you to stay consistent with your routine and get those needed girth gains :)
Click to expand...

Thanks brother, i've been consistent for the past ~5 months. It's tough with work/life but my penis is important to me too LOL. Respecting the GRIND!
 
IneedInches;764209 said:
Thanks DLD! Praise the lord for this website, which got me into PE 10 years ago (time fucking flies! wtf).





Thanks brother, i've been consistent for the past ~5 months. It's tough with work/life but my penis is important to me too LOL. Respecting the GRIND!
Click to expand...

I think you have a progress log don't you? I've seen your name on a log before.
 
IneedInches;764209 said:
Thanks DLD! Praise the lord for this website, which got me into PE 10 years ago (time fucking flies! wtf).
Click to expand...

No shit, right? I can not believe we have been online for 16 years! Amazing!
 
doublelongdaddy;764278 said:
No shit, right? I can not believe we have been online for 16 years! Amazing!
Click to expand...

This is one major reason why it is advisable to always stay consistent with the exercises because time flies.
 
huge-girth;764309 said:
This is one major reason why it is advisable to always stay consistent with the exercises because time flies.
Click to expand...

Time is going by whether you ar training or not. Some men sit on the sidelines for years before they start, so all that time they were watching they could have been gaining.
 
doublelongdaddy;764359 said:
Time is going by whether you ar training or not. Some men sit on the sidelines for years before they start, so all that time they were watching they could have been gaining.
Click to expand...

I used to be there before.
 
huge-girth;764537 said:
Unfortunately, only registered people can view the progress logs.
Click to expand...

Incentive to come out the woods
 
huge-girth;764668 said:
That's true
Click to expand...

They can't see images or other items either. Many of the forums are also closed to them. It is so simple to register and lurk that way you can see everything.
 
doublelongdaddy;764707 said:
They can't see images or other items either. Many of the forums are also closed to them. It is so simple to register and lurk that way you can see everything.
Click to expand...

Those of them viewing as guest are still skeptical to put their legs on the water so they just sit back and watch us swim.
 
I'm hoping the new forum software upgrades will allow even easier registration for new members. There seems to be an issue that has existed for a while now. I've had guys email me saying they couldn't access the member areas after registering, or their registration never got approved...can I help, etc...

On the original topic of this thread...good stuff guys! Brothers helping each other out and helping move us all forward as a result!
 
stillwantmore2;764852 said:
I'm hoping the new forum software upgrades will allow even easier registration for new members. There seems to be an issue that has existed for a while now. I've had guys email me saying they couldn't access the member areas after registering, or their registration never got approved...can I help, etc...

On the original topic of this thread...good stuff guys! Brothers helping each other out and helping move us all forward as a result!
Click to expand...

I am too. Things are up in the air now but soon I will be making these changes.
 
doublelongdaddy;764896 said:
I am too. Things are up in the air now but soon I will be making these changes.
Click to expand...

Hopefully everything will be sorted soon enough.
 
huge-girth;764943 said:
Hopefully everything will be sorted soon enough.
Click to expand...

Please be patient as I am doing this all on my own now.
 
huge-girth;765047 said:
Alright.
Click to expand...


Thank You, I am now working with the techs and we will be going ahead with things.
 
huge-girth;765892 said:
I believe from the month of August, things will definitely turn up.
Click to expand...

Its going too take all of the Brothers to contribute to get things rocking. Many new members are now registering so things will become busier and busier. I will also run the monthly contest again for the month August. Good future in sight!
 
doublelongdaddy;765976 said:
Its going too take all of the Brothers to contribute to get things rocking. Many new members are now registering so things will become busier and busier. I will also run the monthly contest again for the month August. Good future in sight!
Click to expand...

I'm glad about this. Our inability to know that people weren't joining the forum for the past 6 months is still making me surprise.
 
huge-girth;766040 said:
I'm glad about this. Our inability to know that people weren't joining the forum for the past 6 months is still making me surprise.
Click to expand...

Something that LIGHTNING should have seen if he was watching over the site each day. He told me the slow down was do to the summer but I knew there was something else. If it were not for partnership ending the problem would have never been found and we would have sank. Praise the Lord Jesus Christ that this error was found, like a needle in a haystack. This does not mean work is done, not at all, this means we increase our work to bring the message to the world.
 
doublelongdaddy;766207 said:
Something that LIGHTNING should have seen if he was watching over the site each day. He told me the slow down was do to the summer but I knew there was something else. If it were not for partnership ending the problem would have never been found and we would have sank. Praise the Lord Jesus Christ that this error was found, like a needle in a haystack. This does not mean work is done, not at all, this means we increase our work to bring the message to the world.
Click to expand...

We have to keep an eye to make sure that problem doesn't come back. How do you monitor it?
 
huge-girth;766284 said:
We have to keep an eye to make sure that problem doesn't come back. How do you monitor it?
Click to expand...

Just look at the newest member on the front page if it does not change things are wrong. I am watching very closely now.
 
doublelongdaddy;766343 said:
Just look at the newest member on the front page if it does not change things are wrong. I am watching very closely now.
Click to expand...

Alright I will be doing so henceforth.
 
You must log in or register to reply here.
Back
Top