First impressions and some questions

C

chrime

0
Good morning,

I received my package two days ago and I tried the Stretcher out yesterday, everythng worked pretty well but I still have a few questions about it. I already read about one possible solution for one of my problems
and I will test that out but I wanted to post it regardless, just to be sure.

My first question is about the Silipad. I think I watched an updatevideo on the new attachment-ring made out of metal and the new Silipads which will be included in the SiliStretcher package deal.
I was pretty pissed about my timing luck because I ordered my Stretcher two or three days before that video came out, fucking timing...
While unpacking I noticed that my Stretcher has the new metal-attachment-point, so I thought I got lucky and the Silipads are also included,nthey are not. Is that correct or was it some
kind of mistake? I think I placed my order on the 16.04 if that is an idicator for that.

Second question: I think my Siliscale is kind of broken. Sometimes it turns on, sometimes it does not and other times you can read ''Lo'' on the display.
I will change the battery but I'm not sure that is the only problem, I haven't used it more than 5 minutes, the battery should not be empty.

Third question: For that question I posted two photos for better understanding of the problem. I tested the Stretcher for two hours yesterday, everything was fine. I put the belt around my waist and used a position
similar to the position you have with the Phallosan. I wanted to compare the two Stretchers, the Sili is so much more comfortable, its amazing. The vacuum was good, it took me a while to put it on, I will get faster with more practice .

After the two hours I just wanted to try the weight hanging, I've never tried it before and was really looking forward to it. The postion of the glans was close to the piston, (I hope thats the right word) and everything else was done
like it is written in the manuel from Lightning.
I only used 1,25 kg of weight, I want to start slow and progress over time. The position of my glans was a lot further away from the piston after I put the weight on. Is that normal when I use the weight or did I do something wrong?
I thought that I lost the vacuum somehow but it was still ok, The Stretcher never slipped or anything, the sleeve just stretched a lot or something...

Cheers
 
Thanks for being honest and open, this is what the community wants. Good, bad, and ugly.

I can't answer Q1-2 but Q3 I can, so here we go.

Looks to me like you need to be much further inside the SIlistretcher then what is showing.
Yeah, not sure on the exact wording for parts, but I call that piece your glans nearly touches - the plate - and the piston that piece which turns inside. No biggie on wording is it.

So, its a case of getting your glans closer to the plate. Fitting it seated can help, and have the piston retracted so its halfway inside the cylinder head, not on the lip, or right near the backend.

Once its turned so the plate is halfway, you can start to get ready for penetration. You will find it better with the silipads in there, and 'm sure you will get those incl with this order. In the meantime, just place the glans inside against the plate. Doesnt need to be strict here, it can move a little, no need to push it.

Roll the sleeve down, if your uncut have the skin folded back beforehand. Now its time to turn the knob and engage the piston. It needn't be much, but I personally have found with the silipads it protects the sleeve more from being distorted at the point where the glans enter the silistretcher. So be wary on not overdoing it with the piston, but it needs to be enough to keep the glans inside the actual cylinder head, and not looking like it does in your picture. In those pictures, the sleeves will be taking allot more stress then they should be doing, not your fault, its just something we learn here.

That's it. When you hang weight the glans should be visible INSIDE the cylinder at all times, and never leaving the entrance at all. You can practice with the setup as above, then using a hand to pull on the silistretcher, and see how it looks/feels.

Please include suggestions you feel could make it better for the future.
 
  • Like
Reactions: DLD
REDZULU2003 said:
Looks to me like you need to be much further inside the SIlistretcher then what is showing.
Click to expand...

Thanks for the answer.
The pictures do not show the way I put the Stretcher on, I used the exact way Lightning describes in the manuel for using it. The plate was close to halfway inserted, the glans were close to touching the plate, I think I had 2-3mm left of space between the plate and the tip of my glans.
The pictures are just the end result after I put the weight on. I used the Stretcher for two hours before that as a normal ADS, it worked perfectly, the glans never left its position close to the round plate.
 
You could send a Private Message to @Lightning about the Silipads. I've personally used the Silistretcher more with the cap than the pads. Personal preferences. :)

Sometimes the 2032 batteries are pretty much Dead On Arrival or they have very little amount of charge. Even though the scales are checked at the warehouse sometimes a fluke battery gets through.
I've bought that type of battery for some applications and several times they have drained in a quick moment. Both more expensive and inexpensive brands.
But let us know if the battery change doesn't solve the issue!

RED gave you a great answer. Take your time with the device, use the MoSGrip. Also apply the weight gently (which I am sure you do though ;) ) and try to remain somewhat "static", that works for me anyway.
I've tried few yoga poses and small stretching while hanging but too much movement is "a bad time."

Wishing you the best of gains!
 
  • Like
Reactions: DLD
Excellent answers my brothers! I have nothing more to add than take advantage of their advice and ask lightning for some help.
 
chrime said:
My first question is about the Silipad. I think I watched an updatevideo on the new attachment-ring made out of metal and the new Silipads which will be included in the SiliStretcher package deal.
I was pretty pissed about my timing luck because I ordered my Stretcher two or three days before that video came out, fucking timing...
While unpacking I noticed that my Stretcher has the new metal-attachment-point, so I thought I got lucky and the Silipads are also included,nthey are not. Is that correct or was it some
kind of mistake? I think I placed my order on the 16.04 if that is an idicator for that.

Second question: I think my Siliscale is kind of broken. Sometimes it turns on, sometimes it does not and other times you can read ''Lo'' on the display.
I will change the battery but I'm not sure that is the only problem, I haven't used it more than 5 minutes, the battery should not be empty.

Third question: For that question I posted two photos for better understanding of the problem. I tested the Stretcher for two hours yesterday, everything was fine. I put the belt around my waist and used a position
similar to the position you have with the Phallosan. I wanted to compare the two Stretchers, the Sili is so much more comfortable, its amazing. The vacuum was good, it took me a while to put it on, I will get faster with more practice .

After the two hours I just wanted to try the weight hanging, I've never tried it before and was really looking forward to it. The postion of the glans was close to the piston, (I hope thats the right word) and everything else was done
like it is written in the manuel from Lightning.
I only used 1,25 kg of weight, I want to start slow and progress over time. The position of my glans was a lot further away from the piston after I put the weight on. Is that normal when I use the weight or did I do something wrong?
I thought that I lost the vacuum somehow but it was still ok, The Stretcher never slipped or anything, the sleeve just stretched a lot or something...
Click to expand...

1) We can get you out some SiliPads, just PM me your email and name.

2) If the SiliScale is saying LO and acting weird, the battery needs to be replaced. As @arkailija mentioned, when the batteries come in, some of them may not have a full charge. You can get a replacement at your local store for about $2.

3) Make sure you retract the piston 50% into the SiliStretcher then put your penis in so your glans is touching the piston/silipad. The current SiliSleevs are not intended to hang more than 8lbs although some users double layer the SIliSleev to get more weight. The new upcoming SiliSleev Duros will allow heavier weight
 
Last edited:
Lightning said:
1) We can get you out some SiliPads, just PM me your email and name.

2) If the SiliScale is saying LO and acting weird, the battery needs to be replaced. As @arkailija mentioned, when the batteries come in, some of them may not have a full charge. You can get a replacement at your local stor for about $2.

3) Make sure you retract the piston 50% into the SiliStretcher then put your penis in so your glans is touching the piston/silipad. The current SiliSleevs are not intended to hang more than 8lbs although some users double layer the SIliSleev to get more weight. The new upcoming SiliSleev Duros will allow heavier weight
Click to expand...

Thanks lightning for all your hard work!
 
chrime said:
Thanks for the answer.
The pictures do not show the way I put the Stretcher on, I used the exact way Lightning describes in the manuel for using it. The plate was close to halfway inserted, the glans were close to touching the plate, I think I had 2-3mm left of space between the plate and the tip of my glans.
The pictures are just the end result after I put the weight on. I used the Stretcher for two hours before that as a normal ADS, it worked perfectly, the glans never left its position close to the round plate.
Click to expand...

The penis should not be coming out like that though, so, however it happened, it shouldn't, and this was my observation.

As has been pointed out, the current sleeves are not really meant for hanging much weight. Everything came so fast, they were for keeping the penis in an extended state, the healing phase, to prevent turtle effect.

You can use them for hanging weight, but I suggest no more then 4lbs, and go for the duros when they are released. This is likely the cause of the glans riding down after the application of said weight.
 
Sorry guys for the delay, i found the source of the problem. The original sleeve had a tiny little hole, I didn't see it the first time I looked for any damage. I tried hanging again with one of the other sleeves from the package and it worked perfectly. even with a little bit over 2 kg the penis stays in the same position.
Right now I can finally test hanging for real, I'm happy about that.
I'm just angry that I wasn't careful with the slleve and somehow broke it but that can be fixed by handling the next with more care.
Thanks for the help !
 
Double layer Lighting mentioned above.

So put yourself in this configuration first, then apply the Silistretcher as normal.

You should not need more than 1/2 turn on the knob. I use 1/4 to 1/2 turn.

I took a screenshot from Lightning.

View attachment 1821786
 
  • Like
Reactions: DLD
You must log in or register to reply here.
Back
Top