Progress thread SIM's penis enlargement journey

Status
Not open for further replies.
Just an update on what's going on for me.

I'm disappointed in myself.
I woke up late today since I did my last session yesterday to late. I think I was done with it at 02:00. This resulted that I only got one session in today after work. Work ended 21:15. Working day shift tomorrow.

So I will get 2 sessions in after work then. It's much harder when you work day and evening shifts, to make penis enlargement work. I will make this work. Need to plan better, and start to do one session early in the morning and one in the evening. This will be optimal. This will also promote faster growth.

If I do 2 sessions at evning/night my penis will be to sore in the morning. So then I can't do a session early in the morning.

Work starts 07:00 tomorrow. I need sleep.
Time now is: 00:05.

Planning is essential when you work like this. It was easier when I was studying. Then I worked/studying 8-16 and could be at home all the time. This is a new challenge for me. But this will not matter in the end. I will get my 9 inch long penis (BPEL).
 
Set 1:
I bundle to the right, and I do 5 minutes of one dynamic stretch.
Then:
I bundle to the left, and do 5 minutes of one dynamic stretch.

Now this set is done.
I remove myself from the chamber and remove the wrap. I rest 10 minutes to restore blood flow in front of my interior car heater.
Set 2 is exactly like set 1.

Total time is 20 minutes of stretching and 3 + 3 minutes of warmup.

This is what I'm doing:
🔗 Get into BTC (Behind The Cheeks) position with the LENGTHMASTER 3.

This video are showing one set.
🔗 Behind The Cheeks (LM b.ASS) bundled stretches, view from the backside.
Very nice, that I can and will do. Over complicate the use of the Lengthmaster 3 in my head, but then you explain it so well that I realize it’ll be no problems doing it the right way. Just gotta practice the wrapping and clamping technique.

Will also be fun doing something different for length, haven’t even received the Lengthmaster 3 yet already I believe it will give me my dream length of 9 inches.

You are my learning master when it comes to the use of it, and I appreciate it so much. Can’t say this enough.
 
@Abdiel Bull Berg, I can create a detailed program for you if you want to? Are you just using the LENGTHMASTER 3 now? Or are you doing girthwork as well?

In the program it will be written exactly what you should follow. To loosen up your tunica and stretch your ligaments, so you can proceed as fast as possible to BTC Bundled Stretches with LM3.

Because as I wrote previously. You will hit every single angle in BTC. Want you to gain super fast.

Maybe this is not necessary. But I can do it, if it will be helpful for you.
I only do length, though I guess the pumping also gives me a little girth work as well though I suspect I might lay off the pumping for a while when I get the Lengthmaster 3. Just to make sure I get those length gains and that I follow your program exactly as you have done it.
 
Very nice, that I can and will do. Over complicate the use of the Lengthmaster 3 in my head, but then you explain it so well that I realize it’ll be no problems doing it the right way. Just gotta practice the wrapping and clamping technique.

Will also be fun doing something different for length, haven’t even received the Lengthmaster 3 yet already I believe it will give me my dream length of 9 inches.

You are my learning master when it comes to the use of it, and I appreciate it so much. Can’t say this enough.
It will be a steep learning curve, but if you work on it constantly you will progress into BTC Stretches fast, and then you will pull out your penis to 9 inches BPEL in no time.

I know I will be able to get to 9 inches, BPEL with LM3 and a pel.wrap, so you will make this happen as well.
We need to believe and work continuously (trust the process) before the miracle happens.

You're always welcome. I'm happy to teach what I know.
 
Just an update on what's going on for me.

I'm disappointed in myself.
I woke up late today since I did my last session yesterday to late. I think I was done with it at 02:00. This resulted that I only got one session in today after work. Work ended 21:15. Working day shift tomorrow.

So I will get 2 sessions in after work then. It's much harder when you work day and evening shifts, to make penis enlargement work. I will make this work. Need to plan better, and start to do one session early in the morning and one in the evening. This will be optimal. This will also promote faster growth.

If I do 2 sessions at evning/night my penis will be to sore in the morning. So then I can't do a session early in the morning.

Work starts 07:00 tomorrow. I need sleep.
Time now is: 00:05.

Planning is essential when you work like this. It was easier when I was studying. Then I worked/studying 8-16 and could be at home all the time. This is a new challenge for me. But this will not matter in the end. I will get my 9 inch long penis (BPEL).
I know the feeling when I’ve just been too lazy to get my routines in, though you are a very busy man so it’s bound to happen that you’ll miss a workout every now and then, so dont beat yourself up over it.

As the veterans on here says: overall consistency is key, and you are very, very consistent overall.
 
I only do length, though I guess the pumping also gives me a little girth work as well though I suspect I might lay off the pumping for a while when I get the Lengthmaster 3. Just to make sure I get those length gains and that I follow your program exactly as you have done it.
Good choice. Lengthwork first to 9.5" BPEL, then girthwork to 6.5" EG.

Go past with 0.5 inches in length to solidify your length gains at 9 inches BPEL.
 
Sounds like a great plan so going to follow it. Will be both exciting and I guess a little bit frustrating as well learning to use the Lengthmaster 3, just gotta practice and repeat over and over again.
I had real problems to make LENGTHMASTER 3 work for me in the beginning, especially the wrapping. In the beginning my flaccid was smaller, so it was also harder due to that aspect. But I didn't give up.

This is the major reason I'm putting up so much information about it. I don't want people needing to figure everything out by themselves. The faster it works for you, the faster you will grow. And I believe we should gain/grow as fast as possible.

I even was scared from it in the beginning. But look at me now, I have mastered it.
 
I had real problems to make LENGTHMASTER 3 work for me in the beginning, especially the wrapping. In the beginning my flaccid was smaller, so it was also harder due to that aspect. But I didn't give up.

This is the major reason I'm putting up so much information about it. I don't want people needing to figure everything out by themselves. The faster it works for you, the faster you will grow. And I believe we should gain/grow as fast as possible.

I even was scared from it in the beginning. But look at me now, I have mastered it.
You certainly have mastered it, no doubt. And I look forward to tackling the problems that will arrive and solve those problems with your guidance and help.

So good that I can learn from the problems you encountered with it and not having to figure it out all on my own.
 
Here are an album I'm going to upload penis picures to, in order to show my progression.
In some picures I was forced to clear the metadata (I had GPS data included). That's why the dates are wrong in some pictures metadata.

I will upload to this album continuously in order to show my growth progression. Why? It's just fun to upload these and see the changes for myself. Maybe this can motivate someone else as well. At least it motivates me to keep going.

[GALLERY=album, 65][/GALLERY]
 
There where some trouble mid-set on the last set when I was stretching (First session of the day). I could not dig as deep inside my inner penis as I wanted to in the stretch.
I was forced to bundle 1 extra rotation to the left, in order to get a good stretch in my inner penis.

But the chamber was then on the wrong side, and I could not get the levarage that I wanted due to this. The stretching force got reduced, and this is not good.

I can't move the chamber with my current setup, since I have semi-permanent attched a broomstick on the underside of the LENGTHMASTER 3, in order to make the grip better, and be able to angle it easier (= stretch harder).

I believe this is what is happening.
I will try to detach, and re-attach mid-set, in order to clamp down lower to the base, after that the tissue have got a temporary elongation.

Remember: Temporary gains lead to permanent gains as the tunica/tissue keeps being elongated, over and over again...

I know I'm not slipping. The tissue gets a temporary elongation mid-set (pretty substantial elongation), and it's so much that the ability to stretch the inner penis hard gets reduced, and it's so much that I almost not are feeling a stretch (not as hard as I want to).

I think this problem exist due to, to much tissue elongation mid-set on the last set (when going to bundle to the left = last 5 minutes of the last set). This is good, but I can't get a deep stretch in my inner penis due to this.

Imagine having a second modified LENGTHMASTER 3, with the chamber on the opposite side, so I could stretch with the same intensity even with this extra rotation of my penis. 🤔
Somewhat overkill I believe. I will try to detach when the tissue have been elongated, to be able to keep stretching the inner penis hard.

There is a soultion to this. And I believe to detach and attach lower mid-set is the best soultion.
 
This is my thinking...
View attachment 1833558

As you stretch out the tissue. The attachment point in the chamber (at your penis) gets longer and longer away from your inner penis as the tissue are elongated, and this will reduce the stretching force that you can apply for your inner penis.

To counteract this reduction of stretching force and intensity for your inner penis;
You need to reattach the chamber closer to the base, so you will have the same stretching force for your inner penis and the ligaments (fundiform ligament and suspensory ligament) as when you started your session.

This is most noticeable on set 2 for me. I keep "digging" for a good stretching angel for my inner penis. But I can't find high enough intensity to stretch everything good.

You can see this happening in this video as well:
🔗 Behind The Cheeks (LM b.ASS) bundled stretches, view from the backside.

You can see in the video that I do not keep the dynamic stretches long, since I can't find the correct/high enough intensity to stretch my inner penis. I keep "digging and digging" but I can't find the right spot.

[GALLERY=media, 1359][/GALLERY]

You will so clearly feel this, and you will see that the chamber is attached further from the base, and the tissue (your penis shaft = outer penis) being super elongated.
I have measured before and when I measured I got ~ 1 inch (maybe a little less) of elongation at the end of my session. So it's a pretty substantial temporary elongation of my flaccid penis. This will reduce the stretching force in my inner penis, that is: The stretching intensity.

Just some thoughts I had after having this problem multiple times lately. I'm happy I have figured out why the stretching intensity in my inner penis is so low, when I come to set 2 in my session.

I didn't had this problem before. I suppose my tunica are getting easier and essier to elongate now after many months of stretching with the LENGTHMASTER 3.

I hope you could follow my thinking. I believe this is a valid reason to why the stretching force/intensity gets reduced on set 2 in my sessions. I will validate this later tonight. It's do bad I can't rotate one more rotation and stretch as hard (read previous post).

That is: I will detach on set 2 when I'm about to bundle to the left, and then attach closer to the base.

# END OF MESSAGE.
 

Attachments

  • Lollipop-21-5-sec.gif
    Lollipop-21-5-sec.gif
    1.7 MB · Views: 146
Last edited:
Status
Not open for further replies.
Back
Top