Hydroextreme, how much pressure?

I got the hydroextreme 7 and have been using it for about 10 sessions so far doing the 3 min jelq 5min pump x 3 sets. The pull at my base feels amazing and I feel like I could go more pressure with the pump tho my head starts to get this odd prickle tingle sensation and when I take the pump off its a dark red purple. It this to much pressure? Do I have to wait for the head to adapt first? I also bought the length master so will be adding that into the routine with it if anyone has any suggestions there. Also heard using a cock ring is good too. Cam anyone speak for the ball stretcher product also? Figured I might as well strengthen the whole area. Cheers

Pump with gauge way to go

Just so you know pressure on your dick,got many bad afters with my bathmate back in the day, always bang a cock ring on after girth work 👍

So out of curiosity what’s a good vacuum pressure to be under when pumping in air not water

Big Dick Energy said:

So out of curiosity what’s a good vacuum pressure to be under when pumping in air not water

Click to expand...

About 7 or 8

Thank You

Is the gauge an add on? My Bathmate 9 didn’t come with a gauge

Kurt jock said:

Is the gauge an add on? My Bathmate 9 didn’t come with a gauge

Click to expand...

There is no gauge on Bathmate. You need to modify it for that. That's why MityVac is recommended.

Just like everyone, I've been searching around for the info when I purchased my BathMate Hydro Extreme 7. I've obtained pressurized testing info from both the net and a few of the engineering friends. However, do take this with a grain of salt as this an an average value across 10 tests per person, including myself.

At full pressure where the baffles gaiter (the crinkle looking plastic sleeeve at the bottom) is 100% compressed, it's at 16.3 mmHg.
At 80% compressed, it's around 13mmHg
At 70% compressed, it's around 12mmHg
At 50% compressed, 8mmHg

Taking into consideration to prevent fluid buildup or even blisters from forming (my mistake in getting it to 90% compression for too long), stay around 60% to 70% compression. The best feeling is when you have some stimulation to get more blood to max out the pumping sessions. Trust me, you will feel the burn. There's that eagerness that you want to pump even more, but resist that urge.

oldandlively said:

Just like everyone, I've been searching around for the info when I purchased my BathMate Hydro Extreme 7. I've obtained pressurized testing info from both the net and a few of the engineering friends. However, do take this with a grain of salt as this an an average value across 10 tests per person, including myself.

At full pressure where the baffles gaiter (the crinkle looking plastic sleeeve at the bottom) is 100% compressed, it's at 16.3 mmHg.
At 80% compressed, it's around 13mmHg
At 70% compressed, it's around 12mmHg
At 50% compressed, 8mmHg

Taking into consideration to prevent fluid buildup or even blisters from forming (my mistake in getting it to 90% compression for too long), stay around 60% to 70% compression. The best feeling is when you have some stimulation to get more blood to max out the pumping sessions. Trust me, you will feel the burn. There's that eagerness that you want to pump even more, but resist that urge.

Click to expand...

If you remove the comfort insert you can never get to full vacuum, if you do your dick will implode.
- Maybe you are talking about the hydromax model?

With Bathmate you need to go on the feeling, because there are no gauge. You feel in your penis when you have optimal vacuum, for maximum expansion for growth. I also measure with my thumb to gauge optimal pressure.

This are where the danger begins, because some people can not feel this optimal vacuum/pressure, and they end up over pressuring their penis, and the risk of inquiry is there.

squirt_inducer_man said:

If you remove the comfort insert you can never get to full vacuum, if you do your dick will implode.
- Maybe you are talking about the hydromax model?

With Bathmate you need to go on the feeling, because there are no gauge. You feel in your penis when you have optimal vacuum, for maximum expansion for growth. I also measure with my thumb to gauge optimal pressure.

This are where the danger begins, because some people can not feel this optimal vacuum/pressure, and they end up over pressuring their penis, and the risk of inquiry is there.

Click to expand...

I actually use the comfort insert. That's based on the average pressure with the comfort insert added. We sealed the pressure and measured the pressure based on the compression. Plenty of messes along the way. We sacrificed one of the bulb pumps to add a linear (in-line) pressure gauge to measure the pressure during an open valve test. Close valve, you can add one to two mmHg to the reading.

As for implosion without the comfort insert, LOL, not a problem. Shift the Bathmate's circumference up by 2cm to offset the suction from the scrotum and you'll be fine. I tried both ways. Success both times. Now, I recently purchased the gel seat meant for motorcyclists to add to the comfort insert, and the comfort reached "I'm in heaven" compared to the comfort insert or the comfort rings provided by Bathmate.

I wholeheartedly agree with you on the danger of not knowing where to stop during pumping. I was stupid back then as well during my usage of the Doc Johnson air pump for a few years. Too zealous on the pressures, and all you get is injuries.

Interesting stuff!

oldandlively said:

Shift the Bathmate's circumference up by 2cm to offset the suction from the scrotum and you'll be fine.

Click to expand...

What do you mean with this?

squirt_inducer_man said:

What do you mean with this?

Click to expand...

I'll provide more details based on my BM HydroExtreme 7 dimension. Without the comfort insert, the white/grey insert that comes with the unit to reduce the overall opening from 2.5in to 2.25in. The comfort is just that; the reduction of diameter to prevent the "implosion" or suction of excess into the BM unit.

When your pubic region is nicely shave, and I do stress to give your skin some rest time before pumping after shaving, it doesn't matter if you use the comfort insert or not. The total diameter dimension is the same. The comfort insert assist in creating a larger surface area for the unit to create a seal around based on the reduction of the diameter's open area. I do use the comfort insert in tandem with the gel pad cut out to further maximize the comfort. With or without the comfort insert, as long as you have a good seal, you're golden.

Now, shifting portion of the description. Do remember that the open surface area of the unit is 4.91in for the diameter of 2.5in. That's a lot of area for your BM unit to shift in any direction you want within that open surface area. Moving your BM's open surface ~0.8in (or 2cm) up toward your belly button, you're moving your BM's sealing edge from sucking up your scrotum area and more to pubic area. The sensitivity is around the scrotum and less around the pubic region. With the gel pad cutout, you can further shrink the open surface are down. Mine current has a diameter of 1.5in, which limit the open surface area to 1.77in. This is more than enough space to allow base expansion of 4.7in circumference, trap sufficient amount of blood in the penis chambers for expansion within the few minutes before decompression (just like the pump donuts), while prevent excess skin from being sucked into the chamber.

However, do start from a smaller diameter and slowly increase the diameter based on your needs. Just a bit of personal experience from using donuts and gel pads with the air pumps in the past.

Thanks for the awesome information. I will try this...sounds interesting:

oldandlively said:

Now, shifting portion of the description. Do remember that the open surface area of the unit is 4.91in for the diameter of 2.5in. That's a lot of area for your BM unit to shift in any direction you want within that open surface area. Moving your BM's open surface ~0.8in (or 2cm) up toward your belly button, you're moving your BM's sealing edge from sucking up your scrotum area and more to pubic area. The sensitivity is around the scrotum and less around the pubic region.

Click to expand...

Will see if this works for me, thanks.


I can't use my Bathmate HydroXtreme 7 Wide Boy with the comfort insert, because I got to much expansion of my penis at girth. If I use it, I will not get high enough vacuum/intensity for optimal growth. This have been the main reasons for my fast progression with Bathmate pumps. I'm working on girth and not length. The comfort insert will transition what I'm doing into more of a semi-length and girth work session, and I do not want that.

Really happy for this information. I will try the information in the first QUOTE next time.
Thanks.

I hear you brother. At this point, I'm truly envious of you. Most guys don't think that girth is the minimum requirement to make women happy, especially after in a relationship for so long. An honest woman will flat-out tells you that she needs to be filled rather than pounded way up there. She will moan and scream as long as she's stretched and filled slightly past her comfort level, and with a sufficient amount of reach of ~5in into the vaginal canal. The dual A-spot and G-spot stimulation is a critical must without the excessive deep pounding. Once you know where your special lady's spots are, work hard at reaching her goal and not yours. This has been confirmed by all of her lady friends. Minimum girth for 30+ years females is in the 5.5 to 6 inches in girth, and the minimum length is wherever their A-spots are (commonly 5.5 in deep with a 5.5in girth) . If they say something else, they're hiding the truth from you and are wishing for sufficient girths and length. Ladies that their partners are allowed to enjoy other endowed men or use different-sized dildos will verify this fact over and over again.

oldandlively said:

I hear you brother. At this point, I'm truly envious of you. Most guys don't think that girth is the minimum requirement to make women happy, especially after in a relationship for so long. An honest woman will flat-out tells you that she needs to be filled rather than pounded way up there. She will moan and scream as long as she's stretched and filled slightly past her comfort level, and with a sufficient amount of reach of ~5in into the vaginal canal. The dual A-spot and G-spot stimulation is a critical must without the excessive deep pounding. Once you know where your special lady's spots are, work hard at reaching her goal and not yours. This has been confirmed by all of her lady friends. Minimum girth for 30+ years females is in the 5.5 to 6 inches in girth, and the minimum length is wherever their A-spots are (commonly 5.5 in deep with a 5.5in girth) . If they say something else, they're hiding the truth from you and are wishing for sufficient girths and length. Ladies that their partners are allowed to enjoy other endowed men or use different-sized dildos will verify this fact over and over again.

Click to expand...

I agree to your point brother but 7 inches girth is what ai personally want and that's what I'm shooting for. Your words inspired me. What are your stats now.?

7 is awesome if you can get there Through hard work and dedication.

huge-girth said:

I agree to your point brother but 7 inches girth is what ai personally want and that's what I'm shooting for. Your words inspired me. What are your stats now.?

Click to expand...

Wow. 6.3 toward 6.8 is my continual goal until the lady asks for more. 7 is a splendid goal. It might appear to be huge, but as the women get older, huge is what they are looking for. Younger girls less than 30 simply claim larger hurts but once they reach beyond their primes, larger is their desires.

Current stat is 6 BPEL with 5 EG before the game, with one set of SRT routine every 2 months to prevent any regression as muscles and skins do degrade as we age.

After the routine for the past two months, 6.25 BPEL and 5.25 EG. I know this is temporary until I cement the gain later. I believe I found the formula for supplements to assist with the faster cementing. I'll provide more evidence after my blood work to verify later.

oldandlively said:

Wow. 6.3 toward 6.8 is my continual goal until the lady asks for more. 7 is a splendid goal. It might appear to be huge, but as the women get older, huge is what they are looking for. Younger girls less than 30 simply claim larger hurts but once they reach beyond their primes, larger is their desires.

Current stat is 6 BPEL with 5 EG before the game, with one set of SRT routine every 2 months to prevent any regression as muscles and skins do degrade as we age.

After the routine for the past two months, 6.25 BPEL and 5.25 EG. I know this is temporary until I cement the gain later. I believe I found the formula for supplements to assist with the faster cementing. I'll provide more evidence after my blood work to verify later.

Click to expand...

Again you impressed me by saying as the women get older, they require a larger member. 6 inches is meant for ladies in their 20s. 6.5 to 7 inches is for the women in the 30s, 40s 50s.

I'm into mature women. Thick beautiful women with natural body from 30s to 40s.
I must say that, my girth goal changed my preference in women. It made me choose the older women. It also made me choose thick ebony women with thunderous thighs (I go crazy for women with thick thighs).