What's better than 1? 2 cylinders for water pumping!

bemorethanbig

bemorethanbig

Well-known member
A play on words, a couple of months ago I had a backroom lap dance by 2 women and I was in heaven! So many things to touch!

Lol, I got sidetracked.

For water pumping, I have been going back and forth between two cylinders, I like the sensation of the two different sizes. 1 3/4" and 2" is a different pump experience, as everyone will tell you technically one is for length and the other for girth, I don't know the pros or cons of going back and forth but I did want to start a thread and I will report back how it is going for me. So far I have been 4 months going back and forth on each size and I like it.

I wear a cock ring on the balls to prevent ball suckage. If you are between two sizes and don't know what to get, I say get both!
 
A thinner tube will always bring more length while I wider tube will bring more girth
 
I want both! LOL! Since for me this is PE for life, I can see myself in my next decon to go with one cylinder for a few months and stay on one size, but for this routine, I'm going back and forth and will report back. It may sound silly but I like that I feel a different pump with both and it keeps me motivated.

One thing I will say is that I have a slight curve, with 1 3/4" the top of my head pushes a little against the cylinder at that size and not so much at 2" if I could note one PRO would be that I feel like I'm giving my D a head break when going back and forth.
 
Curvature is common for nearly 95% of the penises out there. I have a slight curve too, but don't worry too much about that. In reality, that curve plays a critical role for certain stimulation based on positions. Evolution baby. However, if you truly want to enjoy more, girth is great, but girth to expand your glans is essential, in my book anyway. Expansion of the glans, specifically the corona (the rim) is the enhancement for sensitivity and contractivity by the vaginal wall (or via oral).

Do take heed that too much pumping can do more harm than good in any given day. I know you want length and girth, but all brothers here will tell you not to be too greedy in the PE endeavor. I do both, but more length than girth. Length is all day stretcher (ADS), combo with stretch bundle. Night time, pump time for girth. 15 minutes of pumping via SRT steps, with 90 minutes of post-pumping constriction using smaller penis sleeves or penis ring. Never clamp tightly, if you are using one, and allow blood to constantly cycles in via kegel exercises. This is the trick in getting your fast cementing girth gain. It's been recorded and confirmed throughout the recent decade by the brothers. Once again, too much pumping can create slag skin that you definitely don't want. I learned my lesson from my pumping days to apply to my second journey.
 
bemorethanbig said:
I want both! LOL! Since for me this is PE for life, I can see myself in my next decon to go with one cylinder for a few months and stay on one size, but for this routine, I'm going back and forth and will report back. It may sound sili but I like that I feel a different pump with both and it keeps me motivated.

One thing I will say is that I have a slight curve, with 1 3/4" the top of my head pushes a little against the cylinder at that size and not so much at 2" if I could note one PRO would be that I feel like I'm giving my D a head break when going back and forth.
Click to expand...
You will get used to it. A great way to correct curvature is using a thinner tube along with erect jelqs against the curve
 
At all, I got a question! As I stated. I go back and forth between cylinders for every pump, so far I like it. I do need to grow both length and girth. So do I continue on this path (3 months in) and see where it leads, OR should I do one cylinder for 3-5 months and then switch it out to the other cylinder? I have been doing 30 min hangs with NIR + RED pad and then 5 x 5 x 3, 4-5 times a week.
 
bemorethanbig said:
At all, I got a question! As I stated. I go back and forth between cylinders for every pump, so far I like it. I do need to grow both length and girth. So do I continue on this path (3 months in) and see where it leads, OR should I do one cylinder for 3-5 months and then switch it out to the other cylinder? I have been doing 30 min hangs with NIR + RED pad and then 5 x 5 x 3, 4-5 times a week.
Click to expand...
Ah, the fun of tube switching. This is just my experience, the tubes that are larger than your current fully erected penis girth by 0.15 inch will force you to be elongated as the blood volume pushes you to go up/forward and not out. Your length success is better focused on manual stretches over pumping for less time required.

If you pursue girth while going for length, focus 80% on length over girth as that remaining 20% is for pumping. The reasoning is quite simple. By stressing elongation, the stress loading is already prime for the required stress load for expansion. It takes less time for expansion as a result. This is why I focused 70 to 80% on length stresses all day before hitting that expansion at night.

Try and test what beat suits your growth. If length is more on the high priority, go for length first before girth. If girth is more critical, go for girth before length. If it's a balance, go for 70-80% length and the remaining on girth. Girth should always take secondary in the PE journey unless it's a more critical objective.
 
bemorethanbig said:
At all, I got a question! As I stated. I go back and forth between cylinders for every pump, so far I like it. I do need to grow both length and girth. So do I continue on this path (3 months in) and see where it leads, OR should I do one cylinder for 3-5 months and then switch it out to the other cylinder? I have been doing 30 min hangs with NIR + RED pad and then 5 x 5 x 3, 4-5 times a week.
Click to expand...
This sounds very smart because both length and girth benefit one another. I'm very interested in how this is going to affect you and how much you will grow using this process.
 
Hmmm, thank you for the feedback! Like I said from the start, the D feels different with each cylinder, almost like hitting the gym and doing two different machines for the biceps. I like the idea of going 80/20 or 70/30 with the smaller cylinder if my top goal is length before girth. A 50/50 is also interesting if I am still trying to grow both pretty equally with my objectives. I'm leaning towards 70/30 length vs girth and see if I can break this 6.25 NBPEL that I have been at for a few months before returning back to 50/50. My girth has done great with the 50/50 but need a bit of a push with length. ***To clarify from the start. I don't go back and forth in a single session, I do one session one size cylinder and the next session the 2nd cylinder.

I will report back, this will be an ongoing thread
 
bemorethanbig said:
Hmmm, thank you for the feedback! Like I said from the start, the D feels different with each cylinder, almost like hitting the gym and doing two different machines for the biceps. I like the idea of going 80/20 or 70/30 with the smaller cylinder if my top goal is length before girth. A 50/50 is also interesting if I am still trying to grow both pretty equally with my objectives. I'm leaning towards 70/30 length vs girth and see if I can break this 6.25 NBPEL that I have been at for a few months before returning back to 50/50. My girth has done great with the 50/50 but need a bit of a push with length. ***To clarify from the start. I don't go back and forth in a single session, I do one session one size cylinder and the next session the 2nd cylinder.

I will report back, this will be an ongoing thread
Click to expand...
Looking forward to the progress you will make.
 
Update report! After 6 weeks.
I did 1 3/4" cylinder, 4 out of 5 pumps a week and, 2" once a week.
Results: No measurable length over girth gains, in both cylinders I can reach the same length. But what I did find was that in the sack for the last 6 weeks, I didn't feel as plump regularly as I had before from Nov-April when I went back to back on cylinders every other day. I didn't put 2 and 2 together until this week. I went back to 1 3/4" and 2" pump after a session, meaning for example I pump on Monday with 1 3/4 and Tues 2" etc, etc

My first conclusions:
  • This does not make any pump less worthy, this is like a gym workout, why is there more than one machine for biceps? same as cylinders for me.
  • The goal of targeting length does not outweigh me not feeling as great at girth throughout the week.
  • The 2"cylinder made me feel thicker in the sack, but that does not mean I don't love my 1 3/4" cylinder. I like going back and forth.
This is my balance and my experience. I will report back if anything changes.
 
bemorethanbig said:
A play on words, a couple of months ago I had a backroom lap dance by 2 women and I was in heaven! So many things to touch!

Lol, I got sidetracked.

For water pumping, I have been going back and forth between two cylinders, I like the sensation of the two different sizes. 1 3/4" and 2" is a different pump experience, as everyone will tell you technically one is for length and the other for girth, I don't know the pros or cons of going back and forth but I did want to start a thread and I will report back how it is going for me. So far I have been 4 months going back and forth on each size and I like it.

I wear a cock ring on the balls to prevent ball suckage. If you are between two sizes and don't know what to get, I say get both!
Click to expand...
Here are my opinions and thoughts about using diffrent dimensions of my cylinders.
I have done that throughout my growth period. Would not have grown this fast without this strategy.

Post in thread 'SIM's penis enlargement journey' https://mattersofsize.com/threads/sims-penis-enlargement-journey.1830265/post-1966418
 
My opinion mirrors SIM. How about the smaller one for most of the set, BUT, allow the use of the last 1 or 2 sets using the larger one right off the bat. I use my smaller one for length focus weeks, and 1set with the small and all with the larger 2in for the rest of the sets (10 total). Girth gone wild. My Bathmate is 2.5in, so I got all my small to large covered.
 
oldandlively said:
My opinion mirrors SIM. How about the smaller one for most of the set, BUT, allow the use of the last 1 or 2 sets using the larger one right off the bat. I use my smaller one for length focus weeks, and 1set with the small and all with the larger 2in for the rest of the sets (10 total). Girth gone wild. My Bathmate is 2.5in, so I got all my small to large covered.
Click to expand...
It's good to have many different sizes to force girth expansion throughout and up your shaft. Diffrent diameters will focus on different parts in your tissue (especially if you have a banana penis).

Usually I use a wider diameter on set 2 (of 3).

But I differ here in my opinion. If you have a banana penis, it's very hard and not efficient to work on length in a tighter cylinder. LengthMaster 3 is a much better choice if you want length with banana penis. The only length gains I have seen with girth work have been flaccid hang growth.


The 3" cylinder is the golden one. 😁
 
Last edited:
You must log in or register to reply here.
Back
Top