The Best Pumping Routine for a Thicker Cock….penis enlargement

[DLD]

Girth Program: 5x5x3
5 Minute Slow Squash Jelq (video below)
5 Minutes in the Bathmate or MityVac at full intensity

5 Minute Slow Squash Jelq (video below)
5 Minutes in the Bathmate or MityVac at full intensity

5 Minute Slow Squash Jelq (video below)
5 Minutes in the Bathmate or MityVac at full intensity

Attach SilliRing to retain girth

https://shop.mattersofsize.com/collections/bathmate-penis-pumps-collection

MityVAC Vacuum Penis Pump | Matters of Size

MityVAC Vacuum Penis Pump is designed to enhance blood flow into your penis resulting in improved performance and health. Visit our website now!

shop.mattersofsize.com

SlowSquashJelq VIDEO

More videos:
Jelqing and the Slow Squash Jelq for Penis Enlargement.

Isolated Compression Squeezes, changed the name to Slow Squash Jelq (SSJ).
MOS DVD with all exercises.

 

[derekparle]

Cool man, I'm sure guys who want to pump will find this helpful.

 

[Mw1t68]

How long should I keep the siliring on after the exercise?

 

[DLD]

How long should I keep the siliring on after the exercise?

An hour at a time before gaining back expansion and redoing for additional hours

 

[antlovesteph]

Where can I get a SilliRing to retain girth and a sleeve to retain length?

 

[Mw1t68]

Where can I get a SilliRing to retain girth and a sleeve to retain length?

Look on Shop MoS.

 

[favidl]

Does anyone experience any discomfort as a result of using the extender pump or these type of sex toy?

 

[Alhuwaidi]

No

 

[TCDreamer]

An hour at a time before gaining back expansion and redoing for additional hours

DLD
Are you speaking of one hour in the ring then get blood flow going a bit and then regain complete erection then back into the cock ring for additional hour or additional work?
Thanks

 

[DLD]

DLD
Are you speaking of one hour in the ring then get blood flow going a bit and then regain complete erection then back into the cock ring for additional hour or additional work?
Thanks

Exactly

 

[TCDreamer]

Exactly

Nice. Will follow your lead on this!!!

 

[Donodocuzinho]

can we after an hour of ring just get inside the pump for like 3 or 5 minutes instead? Full intensity should be 5 or 10 hg?

 

[Riverking47]

Can some explain the ssj to me. I can’t access any of the videos for some reason.

 

[DLD]

If you refer to the last post in this thread you can watch ssj on video. Complete MOS DVD with all exercises

 

[californi]

Hello guys I just get the bathmate pump and I want to start working out on girth and length what is the exact program for both?

 

[squirt_inducer_man]

Hello guys I just get the bathmate pump and I want to start working out on girth and length what is the exact program for both?

Girth: Girth Program: 5x5x3

 

[DLD]

Girth: Girth Program: 5x5x3

The one and only

 

[Dongshow]

Thank you for this. This is what I am working on, just thickness. Couple of things I need clarity on. (Used the bathmate 3 times so far newbie)

1. When using the bathmate, should I be hard or soft?

2. The jelq squishing and bending Is a no for me. Messing with my dick that aggressively just weird's me out. Anyone have another suggestion, or will the bathmate be just fine over a longer period of time?

Thank you,

G.

 

[squirt_inducer_man]

When using the bathmate, should I be hard or soft?

Your penis should be erected.

or will the bathmate be just fine over a longer period of time?

You can use it together with the Girth Program: 5x5x3, to get a really permanent girthy penis.

The jelq squishing and bending Is a no for me. Messing with my dick that aggressively just weird's me out.

Are you talking about Slow Squash Jelq's?
You should not be aggressive, just take it slow and methodically.

 

[TCDreamer]

Thank you for this. This is what I am working on, just thickness. Couple of things I need clarity on. (Used the bathmate 3 times so far newbie)

1. When using the bathmate, should I be hard or soft?

2. The jelq squishing and bending Is a no for me. Messing with my dick that aggressively just weird's me out. Anyone have another suggestion, or will the bathmate be just fine over a longer period of time?

Thank you,

G.

Hey, @Dongshow
Check out my pic doing the SSJ. It truly is something to get down as far as technique, but I’m telling you, that @DLD SSJ routine, when done properly, is tremendous. The most important part is to ENSURE you have warmed up at least 10 minutes. I use a heating pad. And then the warm down. Also, you need to ensure you have at least 70-80% erection state. Also to be firm with the one hand as close to the base of the penis as it sits by the fat pad (grabbing as deep as possible) with firmness. You can tell as the blood will trap and the veins will increase. Push against the glans towards the base as we as the other coming towards the glans and…viola….you got the SSJ. Now…it does also take some manual stimulation to get back to 70-80% erection, but that’s the work you gotta put in. Cheers!!’

 

[DLD]

Your penis should be erected.

You can use it together with the Girth Program: 5x5x3, to get a really permanent girthy penis.

Are you talking about Slow Squash Jelq's?
You should not be aggressive, just take it slow and methodically.

Correct

 

[JustYourAverageBrodie]

Girth Program: 5x5x3
5 Minute Slow Squash Jelq (video below)
5 Minutes in the Bathmate or MityVac at full intensity

5 Minute Slow Squash Jelq (video below)
5 Minutes in the Bathmate or MityVac at full intensity

5 Minute Slow Squash Jelq (video below)
5 Minutes in the Bathmate or MityVac at full intensity

Attach SilliRing to retain girth

https://shop.mattersofsize.com/collections/bathmate-penis-pumps-collection

MityVAC Vacuum Penis Pump | Matters of Size

MityVAC Vacuum Penis Pump is designed to enhance blood flow into your penis resulting in improved performance and health. Visit our website now!

shop.mattersofsize.com

SlowSquashJelq VIDEO

Do I need the siliring to retain girth? Or can I do this without the siliring and still gain girth

 

[DLD]

Do I need the siliring to retain girth? Or can I do this without the siliring and still gain girth

No necessary but it will bring gains quicker to heal while expanded

 

[huge-girth]

Do I need the siliring to retain girth? Or can I do this without the siliring and still gain girth

Try to wear the cock ring for at least 1 hour right after your pumping session. You will gain faster like DLD said.

 

[DLD]

Try to wear the cock ring for at least 1 hour right after your pumping session. You will gain faster like DLD said.

Indeed he will

 

[SiliRing]

Is a Silisleeve required for this for the pumping? Also, I've had the original Bathmate since the mid 2000's, would that suffice for this exercise or do I need the Hydro Extreme w/ the pump? Thank you guys in advance!

 

[squirt_inducer_man]

Is a Silisleeve required for this for the pumping? Also, I've had the original Bathmate since the mid 2000's, would that suffice for this exercise or do I need the Hydro Extreme w/ the pump? Thank you guys in advance!

You can use the Vacu Vin mod to increase the vacuum.

Bathmate mod (thread on MOS).

 

[SiliRing]

You can use the Vacu Vin mod to increase the vacuum.

Bathmate mod (thread on MOS).

Or I can just get the Mityvac. How does that compare? Thanks!

 

[squirt_inducer_man]

Or I can just get the Mityvac. How does that compare? Thanks!

Get the MityVac.

 

[SiliRing]

Get the MityVac.

Just read a few posts from your link and you guys have taken this to another level (I'm old school p.e.). Every man on the planet should aspire to improve themselves with no shame in this day and age now.

 

[squirt_inducer_man]

you guys have taken this to another level

That's what we do!

 

[SiliRing]

That's what we do!

I'm off to mod the original Bathmate that started it all using Big S.A.'s mod tutorial. Thats how old I am.

 

[squirt_inducer_man]

I'm off to mod the original Bathmate that started it all using Big S.A.'s mod tutorial. Thats how old I am.

Awesomeness. I suppose you do not use the comfort insert?

Just put a PVC tube over the valve, and keep the valve intact. The pvc tube should be flexible. I tried this but couldn't get hold of a flexible tubing.

The pvc tub should fit snug inside the VacuVin pump. And to get the pvc tube over the valve of the Bathmate pump you can heat it up.
The tube should be short enough so you can operate the valve with your fingers.

This did not work for me since I didn't get the right kind of pvc tube. It was not expandable at all.

 

[SiliRing]

I dont know if the new BM's have the foam padding at the base for comfort against the skin, but it didn't come with a comfort insert, but it probably wasn't necessary back then.

You mean I can heat up the pvc tube to make it even more malleable so the valve can fit inside snug?

Hope to hear from your progress as with my own.

Update: My mistake. I just looked up comfort insert and NO, I never used since it wasn't around back then. I've probably built up some pain tolerance but mostly I just ignored it.

 

[SiliRing]

Sorry to be off topic here but I was wondering if anybody knows if the MOS online retail allows the split payment option through Paypal which enables you to make a purchase with two separate forms of payment (gift debit card + debit card, etc). I've read that Paypal has a *split* toggle option button BUT only for select retailers that elected to allow it while some don't. I haven't used PayPal in years but will use it to make my purchase here if it allows me to split my payment between two debit cards in total of 200 dollars or so. If not, then I'll just use the traditional debit card route.

Thanks in advance.

 

[DLD]

You should be able to use any PayPal payment option.

 

[squirt_inducer_man]

I dont know if the new BM's have the foam padding at the base for comfort against the skin, but it didn't come with a comfort insert, but it probably wasn't necessary back then.

You mean I can heat up the pvc tube to make it even more malleable so the valve can fit inside snug?

Hope to hear from your progress as with my own.

Update: My mistake. I just looked up comfort insert and NO, I never used since it wasn't around back then. I've probably built up some pain tolerance but mostly I just ignored it.

Yes heat the pvc tubing with a heat gun so you can stretch it ovet the bottom of the Bathmate (over the valve). You have the tube always on your Bathmate. When you need to add more vaccum, you put the pvc tube inside the Vacu Vin pump. The fit should be snug

So you are dealing with the gator every time, that's good news for me, maybe I will keep using Bathmate.

But imagine I would be to long for HydroXtreme 9 when I'm done with my LENGTHMASTER 3.
Well then the only choice would be to get the MityVac pumping system. We will see.

 

[TheOriginalFinn]

What number specifically are we calling "full intensity" when using the mighty vac or bath mate? I saw this asked early on in the thread but I don't see where it was answered.

 

[squirt_inducer_man]

mighty vac

Are you referring to MityVac?

 

[TheOriginalFinn]

Yes, the mity vac. Bathmates don't have vac gauges on them. I realized that after I posted.

 

[Mw1t68]

Yes, the mity vac. Bathmates don't have vac gauges on them. I realized that after I posted.

How long have you been pumping with the Mytivac?

 

[DLD]

The Mityvac is the best pump on the market. Since we invented the Mityvac we have had control over every part on the pump. The other awesome things are you don't have to get a bigger pump when you run out of space you simply order a new tube.

 

[SiliRing]

Yes heat the pvc tubing with a heat gun so you can stretch it ovet the bottom of the Bathmate (over the valve). You have the tube always on your Bathmate. When you need to add more vaccum, you put the pvc tube inside the Vacu Vin pump. The fit should be snug

So you are dealing with the gator every time, that's good news for me, maybe I will keep using Bathmate.

But imagine I would be to long for HydroXtreme 9 when I'm done with my LENGTHMASTER 3.
Well then the only choice would be to get the MityVac pumping system. We will see.

Just impressive.

Just to be sure what are the inner and outer diameter specs for the PVC tubing you are using? I'm ordering on Amazon and want to order the proper inner and outer diameter PVC tubing to have a snug fit inside the vacu vin on one end and still be able to heat up the other end to expand and cover the Bathmate release snout. Thanks as always!

 

[squirt_inducer_man]

Just impressive.

Just to be sure what are the inner and outer diameter specs for the PVC tubing you are using? I'm ordering on Amazon and want to order the proper inner and outer diameter PVC tubing to have a snug fit inside the vacu vin on one end and still be able to heat up the other end to expand and cover the Bathmate release snout. Thanks as always!

I didn't get it to work since I ordered the wrong PVC tube. It was not flexible at all. Maybe I needed a heating gun, I only used a hair dryer to heat it up.

But these dimensions seams to work:

ID = inner diameter
OD = outer diameter

The tube fitted snug inside the Vacu Vin pump. Maybe if you have the OD at 27 mm it would be even more perfect.

*Edit: OD = 26 mm will probably be a perfect fit.

 

[SiliRing]

I didn't get it to work since I ordered the wrong PVC tube. It was not flexible at all. Maybe I needed a heating gun, I only used a hair dryer to heat it up.

But these dimensions seams to work:
View attachment 1833461
ID = inner diameter
OD = outer diameter

The tube fitted snug inside the Vacu Vin pump. Maybe if you have the OD at 27 mm it would be even more perfect.

Thanks!

https://www.amazon.com/gp/product/B07ZC1YG9X/ref=ox_sc_act_title_2?smid=A3JHV5VFXKGHRT&psc=1

I just found this with the dimensions of 19.1 ID and 25.4 OD which converts to .75 inches ID and 1 inch OD. If you think 1 inch OD will still be a snug fit inside the Vacu Vin then this flexible PVC tubing would be good for us to use.

 

[squirt_inducer_man]

Thanks!

https://www.amazon.com/gp/product/B07ZC1YG9X/ref=ox_sc_act_title_2?smid=A3JHV5VFXKGHRT&psc=1

I just found this with the dimensions of 19.1 ID and 25.4 OD which converts to .75 inches ID and 1 inch OD. If you think 1 inch OD will work then this flexible PVC tubing would be perfect for use for us.

I believe you need at least OD = 26 mm for the PVC tube. Otherwise It's a risk it won't seal around the Vaccu Vin pump (the pvc tube inside the Vaccu Vin).
A perfect OD will probably be: 26.5 mm.

 

[SiliRing]

I believe you need at least OD = 26 mm for the PVC tube. Otherwise It's a risk it won't seal around the Vaccu Vin pump (the pvc tube inside the Vaccu Vin).
A perfect OD will probably be: 26.5 mm.

Ok. Thank you. Will continue to look into and share my findings.

 

[squirt_inducer_man]

Ok. Thank you. Will continue to look into and will share my findings.

Awesome. Please share everything. Even when I'm not going to need it (I'm to big for my hydromax 5). But other brothers could use detailed information about how to apply, the Vaccu Vin mod in the most easy and effective way.

I think maybe I could get this to work if I had a heating gun. Or my pvc tubing was simply to stiff and non elastic.

 

[SiliRing]

Awesome. Please share everything. Even when I'm not going to need it (I'm to big for my hydromax 5). But other brothers could use detailed information about how to apply, the Vaccu Vin mod in the most easy and effective way.

I think maybe I could get this to work if I had a heating gun. Or my pvc tubing was simply to stiff and non elastic.

I have an idea. It might not be possible to find the 26.5-27 mm OD dimension when the 1 inch OD (25.4 mm) is seemingly the standard so I think using heavy duty clear tape to wrap around the tubing will give it enough circumference to reach the desired mm diameter. Just one or two layer(s) would probably suffice. I'm going to give it a shot.

I also ordered a heating gun as per your advice.

 

[squirt_inducer_man]

I have an idea. It might not be possible to find the 26.5-27 mm OD dimension when the 1 inch OD (25.4 mm) is seemingly the standard so I think using heavy duty clear tape to wrap around the tubing will give it enough circumference to reach the desired mm diameter. Just one or two layer(s) would probably suffice. I'm going to give it a shot.

I also ordered a heating gun as per your advice.

Awesomeness.

You can put the information/your solution in this thread later:
Bathmate mod