SiliStretcher bein Uncircumcised and Hanging

Are you using the Duro Sleeves? The sleeves were made to handle much heavier weight using the SiliStretcher.
Yes, I am... I'm using the duro sleeves on my dick and on the chamber of the Silistretcher, I noticed today while I was trying to use the SiliStretcher that inside the chamber the sleeve formed almost a ballon, like it was being inflated from the outside.
Threre are two problems:
a) The sleeve can't handle the vacuum pressure, inflates and the weights touch the floor
b) The sleeve slips

The King
 
Yes, I am... I'm using the duro sleeves on my dick and on the chamber of the Silistretcher, I noticed today while I was trying to use the SiliStretcher that inside the chamber the sleeve formed almost a ballon, like it was being inflated from the outside.
Threre are two problems:
a) The sleeve can't handle the vacuum pressure, inflates and the weights touch the floor
b) The sleeve slips

The King
I kind of have the same issue a little bit. I just try to pull back my foreskin as much as I can while applying the silicap and silisleeve then paper tape where the sleeve and foreskin meet. I have currently 3lbs and sit a little elevated from normal chair position or lean back. Does not touch the ground that way. Only thing I wonder sometimes is if I am doing the vacuum correctly when I turn the knob.
 
I kind of have the same issue a little bit. I just try to pull back my foreskin as much as I can while applying the silicap and silisleeve then paper tape where the sleeve and foreskin meet. I have currently 3lbs and sit a little elevated from normal chair position or lean back. Does not touch the ground that way. Only thing I wonder sometimes is if I am doing the vacuum correctly when I turn the knob.
I stopped using the silicap, because the it slipped alot and then the vacuum would hurt A LOT, so I tried without it and... BOOOM! No pain... actually it got real confortable.
Do you tape all the loose skin or just a part of it ?
If you don't mind, can you post a pic ?

The King
 
Also for those uncut, you can use the silistretcher as well, by keeping the skin over the glans, BUT, make sure you don't have skin trapped anywhere.

I've used both methods, skin back, and as it is without hitch.

The silicap can be left out, but you risk blisters. You could slap on a condom and go with that, as it'll work very similar with more room, as I recall the silicap has little room, although it stretches over a Coke can, that is a solid object, unlike the penis.

The use at gauze, or surgical tape over that glans helps to keep fluid at Bay
 
I have not tried it without the silicap because people say it causes blisters. Will try tho. Silicap is annoying to set up. See how it goes. I am on my 2nd day using it. Going to make a progress log soon.
Sorry for taking so long to answer, college, work training it all went insane.
It looks like you don't use a silisleeve on you, just on the chamber, am I right ?

And about the silicap, it hurted me, I think it was what people call blister

The King
View attachment 1824358
 
Also for those uncut, you can use the silistretcher as well, by keeping the skin over the glans, BUT, make sure you don't have skin trapped anywhere.

I've used both methods, skin back, and as it is without hitch.

The silicap can be left out, but you risk blisters. You could slap on a condom and go with that, as it'll work very similar with more room, as I recall the silicap has little room, although it stretches over a Coke can, that is a solid object, unlike the penis.

The use at gauze, or surgical tape over that glans helps to keep fluid at Bay

By keeping the skin over the skin over the glans wouldn't I be stretching the skin ? Because sometimes my dick turtle and the skin covers my glans and then I fell the stretch only on my skin.

About the condon, I put it and then put the silisleeve over it ?

The King
View attachment 1824359
 
Best GIF ever !
I guy from here posted, liked so much I'll be using it LOL
By the way, do you think it could be the heat that is making the silisleeve stretch more than before ?

The King
View attachment 1824381

Sorry, I missed your question. If it is the regular silisleev, and not the Duro version, then yes. Heat will play a factor in the pliability of the silisleev. This is good and bad, depending on your application.
 
You need skin stretch, if you don't like that, just roll it back.

I agree with you. If your uncut you need to become comfortable with the rolling back the foreskin. Without rolling back the foreskin all you’ll be doing the stretching skin you won’t be stretching the penis. Every uncut guy needs to get used to the head being exposed.
 
I've found that skin stretch to the foreskin only happens if the grip slips over the head, which it should never do.

As someone uncut, I stretch both ways as they offer benefits.

If you stretch uncut with the foreskin covered, just ensure you got a tight grip below the glans, and that grip does not ride across over the head.

You may benefit with the free hand before commencing a session to pull gently at the scrotum, and base area downwards so you don't have the possibility of loose skin getting pulled.

I can see how folk would think stretching uncut covered could grow more skin, but it's not going to happen unless you go over the glans, which would be insane anyway.

If you're ever going to get skin stretch out if control, this applies to cut also, it's the base area where the scrotum meats the bottom base of the penis.
 
I've found that skin stretch to the foreskin only happens if the grip slips over the head, which it should never do.

As someone uncut, I stretch both ways as they offer benefits.

If you stretch uncut with the foreskin covered, just ensure you got a tight grip below the glans, and that grip does not ride across over the head.

You may benefit with the free hand before commencing a session to pull gently at the scrotum, and base area downwards so you don't have the possibility of loose skin getting pulled.

I can see how folk would think stretching uncut covered could grow more skin, but it's not going to happen unless you go over the glans, which would be insane anyway.

If you're ever going to get skin stretch out if control, this applies to cut also, it's the base area where the scrotum meats the bottom base of the penis.

Best Answer!
 
Guys I got what u are talking about, I'll still going to stretch with the skin pulled and I also found a solution (I think) to my problem with de durosleeve, I need a litle erection because my dick REALLY shrinks, it gets a little bit longer and thicker than my thumb when it shrinks, so the sleeve slips or it create a ballon inside the chamber and I CAN'T' stretch.

By the way, I was at my tournament, so I didn't hang this week,this week when I got the silistretcher for my suprise the durosleeve was ripped without using it... and the last time I used it, it was fine, I don't understand that, someone have any clue ?

The King
View attachment 1824721
 
Guys I got what u are talking about, I'll still going to stretch with the skin pulled and I also found a solution (I think) to my problem with de durosleeve, I need a litle erection because my dick REALLY shrinks, it gets a little bit longer and thicker than my thumb when it shrinks, so the sleeve slips or it create a ballon inside the chamber and I CAN'T' stretch.

By the way, I was at my tournament, so I didn't hang this week,this week when I got the silistretcher for my suprise the durosleeve was ripped without using it... and the last time I used it, it was fine, I don't understand that, someone have any clue ?

The King
View attachment 1824721
Both my durocap and duroband ripped once each. I am being more careful with my 2nd set. Just have to be careful with them when you stretch them.
 
For foreskin users, pull foreskin forward over the head and tape an X over the top of your head and then around the sides of the X to secure it. Use microporous tape. Then use the SiliCap to prevent blistering / edema. Also use the SiliPad2 or SiliPad3.

If your SiliSleev or SiliCap split, you may have cut it wrong. We now offer multiple lengths to help prevent this. For those who had issues with splits, email support@mattersofsize.com with your order number and email, we will get you complimentary replacements.

The DuroBand gets placed around the SiliStretcher2 bell over the SiliSleev or DuroSleev to help add a layer of protection against wear. They are not necessary with the DuroSleevs but they still add protection against rubbing against jeans for all day use. We have a video coming soon on this.
 
Last edited:
Keep in mind, all sleeves are wear and tear items like tires on cars. They should last a few months if used and cared for properly. There is no perfect sleeve. There are very hard sleeves that never break but take allot of force to use and are not a reality for most ADS users.

We have a SiliSleev5 that is shipping next week that is harder than the SIliSleev2 and softer than the DuroSleevs.

We offer bulk sleeve discounts

Use the code BULK20 at checkout for 20% discount on 6 to 11 sleeves of choice
Use the code BULK25 at checkout for 25% discount on 12 or more sleeves of choice
 
For foreskin users, pull foreskin forward over the head and tape an X over the top of your head and then around the sides of the X to secure it. Use microporous tape. Then use the SiliCap to prevent blistering / edema. Also use the SiliPad2 or SiliPad3.

If your SiliSleev or SiliCap split, you may have cut it wrong. We now offer multiple lengths to help prevent this. For those who had issues with splits, email support@mattersofsize.com with your order number and email, we will get you complimentary replacements.

The DuroBand gets placed around the SiliStretcher2 bell over the SiliSleev or DuroSleev to help add a layer of protection against wear. They are not necessary with the DuroSleevs but they still add protection against rubbing against jeans for all day use. We have a video coming soon on this.
Thanks for the advice, I will try it soon.
And goona be in touch with the support.

The King
View attachment 1824736
 
You need to remove your DuroBand and sleeve from your SiliStretcher2 when not in use. If you leave them attached when not in use, they will eventually stretch, deform and split. This is covered in the instructions. This explains why the DuroSleev and DuroBand split when not in use.

Follow the sleeve maintenance section in the instructions if you want to preserve your sleeves and save money on replacements.
 
  • Like
Reactions: DLD
General chit-chat
Help Users
  • MoS Notifier MoS Notifier:
    Guest Sam hi has joined the room.
  • S (Guest) Sam hi:
    How's everyone
    Quote
  • oldandlively @ oldandlively:
    @sam hi, good to see you brother. Post in the forum and we'll chat more.
    Quote
  • MoS Notifier MoS Notifier:
    Akteon1 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Guest Jayson44 has joined the room.
  • J (Guest) Jayson44:
    hi
    Quote
  • J (Guest) Jayson44:
    Out of sheer curiosity, is anyone interested in having a premature O together while we watch videos?
    Quote
  • J (Guest) Jayson44:
    Anyone wanna cum to asians twerking or kpop vids
    Quote
  • Akteon1 @ Akteon1:
    Hi. Good to be here.
    Quote
  • oldandlively @ oldandlively:
    @Akteon1, good to see you here. Join us into the forum.
    Quote
  • Akteon1 @ Akteon1:
    Which forum? How do I get there?
    Quote
  • Quote
  • MoS Notifier MoS Notifier:
    McDong is our newest member. Welcome!
  • Akteon1 @ Akteon1:
    I was approached by a coach from a Nigerian phone number?
    Quote
  • MoS Notifier MoS Notifier:
    gabrieljones is our newest member. Welcome!
  • oldandlively @ oldandlively:
    @Akteon1, visit other sub forums to check out all the info in PE. Forum list
    Quote
  • oldandlively @ oldandlively:
    More importantly, see the first three posts in this sub forums to answer most of your doubts and questions: Ask questions
    Quote
  • MoS Notifier MoS Notifier:
    tbean750 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Guest pedguin has joined the room.
  • P (Guest) pedguin:
    Hello Im looking into getting an ADS and some stretcher what would you guys recommend
    Quote
  • H @ huge-girth:
    pedguin said:
    Hello Im looking into getting an ADS and some stretcher what would you guys recommend
    Sign-up on the forum. Buy the length master and the Silistretcher both from the MOS shop
    Quote
  • P (Guest) pedguin:
    ive been looking at the silistretcher for over half a year, and will look into the length master thank you.
    Quote
  • MoS Notifier MoS Notifier:
    silverberg is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    thescholarjt is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    mos is our newest member. Welcome!
      MoS Notifier MoS Notifier: mos is our newest member. Welcome!
      Back
      Top