Problem with hanging

[chrime]

I think I have a problem with hanging while using the SS, I'm not totally sure so I want to check it out with you guys.
I recently started using the SS for hanging, before that I only used it as an ADS. I had to take a long break from PE so I started
hanging with Pyramid Sets on the beginner level, 1hour 1,25kg and 30 min 2,5kg, 1,25kg was the lightest weight I have at home.
After the sets are finished and I take the SS off, my glans are a bit pale, a little bit grey even I would say. Two or three minutes after taking it off the glans look normal
again.
I don't have that problem when I use the SS as an ADS, I even wear it for longer periods of time and after taking it off the glans look always healthy.
Is that look normal after hanging or am I doing something wrong?
The only difference between normal use and hanging is the sleeve and the vacuum tension. I only use the durosleeve for the hanging, for ADS I still use the original one
that came with the SS1.
I bought both of the durosleeve sizes, I used the 0,75" in the beginning after widening it up. I thought that maybe the sleeve is still too tight so today I tried using the 1", I got the same result and the 1" sleeve is definitely not too tight. The tension is close to a half turn, for ADS I only use 1/4 of a turn.

 

[DLD]

No matter what you do when there is compression involved there’s always going to be an issue with the skin to some degree. The idea is to minimize this by using a good wrapping technique that is free of wrinkles or creases, this is usually the culprit of skin issues.

 

[chrime]

No matter what you do when there is compression involved there’s always going to be an issue with the skin to some degree. The idea is to minimize this by using a good wrapping technique that is free of wrinkles or creases, this is usually the culprit of skin issues.

But why is it happening only with hanging? I use the Silistretcher the exact same way every time, I have a Silicap with a tiny hole on the glans and no wrinkles or anything like that are in the cap or the sleeve itself. The only thing I change between ADS use and hanging with the Silistretcher is the sleeve. The condition after hanging looks To like bad blood curculation, that can`t be healthy in the long run.

 

[DLD]

But why is it happening only with hanging? I use the Silistretcher the exact same way every time, I have a Silicap with a tiny hole on the glans and no wrinkles or anything like that are in the cap or the sleeve itself. The only thing I change between ADS use and hanging with the Silistretcher is the sleeve. The condition after hanging looks To like bad blood curculation, that can`t be healthy in the long run.

You can have poor circulation for up to an hour without fear of anything permanent. Hanging gives the most compression and will affect blood flow more than the SS so that’s kind of normal. Have you tried any traditional ways of wrapping? Sometimes the old-school way works better than the newer methods. I’ll check out the wrapping foruyou can have poor circulation for up to an hour without fear of anything permanent. Hanging gives the most compression and will affect blood flow more than the SS so that’s kind of normal. Have you tried any traditional ways of wrapping? Sometimes the old-school way works better than the newer methods. I’ll check out the wrapping forum & see what you like there.

 

[chrime]

You can have poor circulation for up to an hour without fear of anything permanent. Hanging gives the most compression and will affect blood flow more than the SS so that’s kind of normal. Have you tried any traditional ways of wrapping? Sometimes the old-school way works better than the newer methods. I’ll check out the wrapping foruyou can have poor circulation for up to an hour without fear of anything permanent. Hanging gives the most compression and will affect blood flow more than the SS so that’s kind of normal. Have you tried any traditional ways of wrapping? Sometimes the old-school way works better than the newer methods. I’ll check out the wrapping forum & see what you like there.

I will try to use additional wrapping, just thought that for hanging with the SS I only have to clip on the weight and I`m good to go. Thanks for the advice, I will check it out and try to find something that will work for me, additional information about PE can only help me in the long run.

 

[DLD]

I will try to use additional wrapping, just thought that for hanging with the SS I only have to clip on the weight and I`m good to go. Thanks for the advice, I will check it out and try to find something that will work for me, additional information about PE can only help me in the long run.

I wish it was all that easy but the answer is it’s not because everybody has a different shape and size that customization of wrapping becomes important. Keep working different messages until you master what allows you to do the heaviest work possible.

 

[Lightning]

I will try to use additional wrapping, just thought that for hanging with the SS I only have to clip on the weight and I`m good to go. Thanks for the advice, I will check it out and try to find something that will work for me, additional information about PE can only help me in the long run.

@chrime Did you find out what is happening? There should be no real difference with that light of weight. You should be able to go from the ADS directly to the weights with no changes.

 

[chrime]

@chrime Did you find out what is happening? There should be no real difference with that light of weight. You should be able to go from the ADS directly to the weights with no changes.

I'm still trying to test things out. I'm looking into wrapping but I noticed something else, maybe that is already the problem. Right now I hang for a total time of 3h, but only 30 minutes each session followed by 5 minutes bundled stretches, I think thats still a good workout. @Lightning
After the 30 minutes are over the glans are always positioned between the end of the bell and the beginning of the sleeve, maybe that is causing the bad circulation, I uploaded three pictures for better understanding.
The glans in this picture are mostly fine, just a purple ring going around them, but that is after only 30 minutes, after 1h the glans in toal look a lot more grey.
right now I don't know how to fix that problem, I'm using a dursoleeve, as shown in the picture my glans are postioned against the piston.
I use 1/2 turn vacuum with a max. weight of 2,5kg. At the start of the session it still is postioned close to the piston but it somehow gradually goes further back.

 

[DLD]

How long are you under pressure until your head appears to this way?

 

[chrime]

How long are you under pressure until your head appears to this way?

That picture was taken after 30 minutes.

 

[DLD]

That picture was taken after 30 minutes.

To me it looks like just a normal pressure being applied and as long as it returns to shape with an hour I would not worry. Some deep tissue massage will help get things back to normal.

@Lightning What do you think

 

[Lightning]

I'm still trying to test things out. I'm looking into wrapping but I noticed something else, maybe that is already the problem. Right now I hang for a total time of 3h, but only 30 minutes each session followed by 5 minutes bundled stretches, I think thats still a good workout. @Lightning
After the 30 minutes are over the glans are always positioned between the end of the bell and the beginning of the sleeve, maybe that is causing the bad circulation, I uploaded three pictures for better understanding.
The glans in this picture are mostly fine, just a purple ring going around them, but that is after only 30 minutes, after 1h the glans in toal look a lot more grey.
right now I don't know how to fix that problem, I'm using a dursoleeve, as shown in the picture my glans are postioned against the piston.
I use 1/2 turn vacuum with a max. weight of 2,5kg. At the start of the session it still is postioned close to the piston but it somehow gradually goes further back.

I see you are not using a silipad or a gel pad inside the SiliStretcher. The silipad helps protect the glans and provides more control.

Also, you should fully retract the piston and then extract one full turn before putting your penis in it. You want as much of the penis inside the vacuum bell before applying the sleeve.

 

[chrime]

DLD, it returns to normal almost immediately after taking the SS off. Even that dark grey dicoloration that happens after wearing it 1-1,5h goes away almost immediately. I think it's just weird that I can wear the SS with light to medium tension for healing even while sleeping without any issues but have dicoloration if I use it with high tension or as a hanger when I go longer than an hour.
i wanted to try your exclusive lenght routine but at this point bit I think I will stick with hanging heavier weights for 30 minute sets, it won't give me scare every time I take off the stretcher (xd)

I see you are not using a silipad or a gel pad inside the SiliStretcher. The silipad helps protect the glans and provides more control.

Also, you should fully retract the piston and then extract one full turn before putting your penis in it. You want as much of the penis inside the vacuum bell before applying the sleeve.

I already thought about that two weeks ago, the piston can do exactly one full turn before it is fully retracted. So it seems that I do at least one thing right with the SS (cwl)

 

[DLD]

Don’t get down yourself everything takes time to master and you will master this also. The wonderful thing about having this brotherhood as you can guarantee somebody came before you with the same issue and figured it out. We have hundreds of thousands of people to come through here and many of them have the same exact questions and concerns. So keep practicing until you get it perfect.

 

[chrime]

Don’t get down yourself everything takes time to master and you will master this also. The wonderful thing about having this brotherhood as you can guarantee somebody came before you with the same issue and figured it out. We have hundreds of thousands of people to come through here and many of them have the same exact questions and concerns. So keep practicing until you get it perfect.

you are right, it will work out in the end, it kind of did already. The problem from my original post is gone, sadly I have a new one and could use some help again.
i don't want to open a new thread, it still is a problem with hanging. About a month ago tiny small blood blisters started to appear in my urethral opening during the hanging sessions. The first time it scared the shit out of me, one of the blisters broke and I had blood in my Silicap.
I have no clue what causes the blisters, yesterday I had no problems with my hanging session. Today one blister appeared, the weight wasn't even as high as yesterday.
Its so annoying, everytime I have a blister I have to wait until it's healed...

 

[philevan]

you are right, it will work out in the end, it kind of did already. The problem from my original post is gone, sadly I have a new one and could use some help again.
i don't want to open a new thread, it still is a problem with hanging. About a month ago tiny small blood blisters started to appear in my urethral opening during the hanging sessions. The first time it scared the shit out of me, one of the blisters broke and I had blood in my Silicap.
I have no clue what causes the blisters, yesterday I had no problems with my hanging session. Today one blister appeared, the weight wasn't even as high as yesterday.
Its so annoying, everytime I have a blister I have to wait until it's healed...

That's from vacuum. Try some micro pore or soft cloth tape. Put the tape off and on ur hand so some stickiness comes off. Then put that tape directly over ur urethra. Even a piece or two over ur head can help. Give that a try. That many times prevents blisters. They heal fast. But it can be a problem later on

 

[DLD]

you are right, it will work out in the end, it kind of did already. The problem from my original post is gone, sadly I have a new one and could use some help again.
i don't want to open a new thread, it still is a problem with hanging. About a month ago tiny small blood blisters started to appear in my urethral opening during the hanging sessions. The first time it scared the shit out of me, one of the blisters broke and I had blood in my Silicap.
I have no clue what causes the blisters, yesterday I had no problems with my hanging session. Today one blister appeared, the weight wasn't even as high as yesterday.
Its so annoying, everytime I have a blister I have to wait until it's healed...

What do you think is causing the blister?

 

[Lightning]

I'm still trying to test things out. I'm looking into wrapping but I noticed something else, maybe that is already the problem. Right now I hang for a total time of 3h, but only 30 minutes each session followed by 5 minutes bundled stretches, I think thats still a good workout. @Lightning
After the 30 minutes are over the glans are always positioned between the end of the bell and the beginning of the sleeve, maybe that is causing the bad circulation, I uploaded three pictures for better understanding.
The glans in this picture are mostly fine, just a purple ring going around them, but that is after only 30 minutes, after 1h the glans in toal look a lot more grey.
right now I don't know how to fix that problem, I'm using a dursoleeve, as shown in the picture my glans are postioned against the piston.
I use 1/2 turn vacuum with a max. weight of 2,5kg. At the start of the session it still is postioned close to the piston but it somehow gradually goes further back.

I see you are not using a SiliPad or GelPad inside the SIliStretcher. The pads fill up the empty void and reduce swelling and blisters. Empty space inside the vacuum bell will cause extra fluid build-up. You want to be tight as possible inside since the majority of vacuum is concentrated on the upper part of your penis. Using the pad will also help eliminate deformity.

Also, like philevan mentioned above, try using micropore tape on the glans, this is known to work great for many people as well.

 

[chrime]

Thanks for the advice, I will give the tape and the Silipad a try. I never used it because I wanted to be as far in the piston as possible with the glans.

 

[DLD]

Thanks for the advice, I will give the tape and the Silipad a try. I never used it because I wanted to be as far in the piston as possible with the glans.

Let us know how it goes my brother

 

[chrime]

Let us know how it goes my brother

I will as soon as I get my stretcher sorted out. I didn't pay attention last night and accidently turned the piston too far, the rod got disconnected and is now stuck in the stretcher and I'm unable to get it out. The same thing happened to me once with the first SS model, that time the rod just fell out, this time it's sadly stuck really tightly. I already tried banging the stretcher on a desk and carefully loosing it a bit with a screwdriver but so far nothing worked. Do you guys have any ideas for that sort of problem?
it may look like you can easily push the rod back in but it's stuck on one of the edges, I already tried that.

 

[DLD]

I have never seen this happen, @Lightning may be able to help

 

[Lightning]

https://mattersofsize.com/threads/e...cher2-vacuum-piston-for-vacuum-video.1819850/

 

[Lightning]

Turn the vacuum knob as you are applying pressure to the piston. You may need to use something hard like a broom stick or pipe and press really hard against the piston as you are turning the vacuum knob.

 

[chrime]

I'm so sorry for not updating, life got in the way...

The tape did the trick for me, no problems at all after I started using it. I love it so much, I bought 7 packages in advance, I don't want to run out
The Silipad works as well but the tape is the gamechanger for me.
Thanks for all the input and help!

Cheers

 

[DLD]

I'm so sorry for not updating, life got in the way...

The tape did the trick for me, no problems at all after I started using it. I love it so much, I bought 7 packages in advance, I don't want to run out LOL
The Silipad works as well but the tape is the gamechanger for me.
Thanks for all the input and help!

Cheers

Excellent to hear my friend! Have an awesome weekend.

 

[49-er]

I'm so sorry for not updating, life got in the way...

The tape did the trick for me, no problems at all after I started using it. I love it so much, I bought 7 packages in advance, I don't want to run out LOL
The Silipad works as well but the tape is the gamechanger for me.
Thanks for all the input and help!

Cheers

Key is your still carrying on and around