More stretcher questions

tbean750

Member
I'm buying either a stretcher tomorrow or penis weights for length training. There's two stretchers in debating between I will post pictures my questions are can anyone tell me about how many pounds of tension the all day one that's about $20 will reach? And for the second one will this allow me to pull my penis even higher than the stretcher I already have? Which will be in pics too. TYVM for any answers because of the all day stretcher doesn't go as high as the one I have now I will probably not buy and the one with vacuum that's normal stretcher if I can't full my penis further because the cup then I may not buy but then in these cases I would lean towards investing in weights instead of either
 

Attachments

  • Screenshot_20250320-213607.webp
    Screenshot_20250320-213607.webp
    65.6 KB · Views: 4
  • Screenshot_20250320-213649.webp
    Screenshot_20250320-213649.webp
    75.7 KB · Views: 3
  • Screenshot_20250317-004253.webp
    Screenshot_20250317-004253.webp
    80.9 KB · Views: 2
  • Screenshot_20250320-213747.webp
    Screenshot_20250320-213747.webp
    69.9 KB · Views: 3
  • Screenshot_20250320-213752.webp
    Screenshot_20250320-213752.webp
    75.6 KB · Views: 4
  • IMG_20250305_234539_HDR.webp
    IMG_20250305_234539_HDR.webp
    592.4 KB · Views: 3
Before we go any further, this is about comforts, comforts, comforts, and a lot more comforts. But each person will respond differently. Some like the noose and strap type, while other can only handle the vacuum type. I have all of them. So far, the vacuum works great for me. HOWEVER! Vacuum will only last for a few hours before the high pressure causes the glans to be very discomfort to the point of blistering. So...

I'm buying either a stretcher tomorrow or penis weights for length training. There's two stretchers in debating between I will post pictures my questions are can anyone tell me about how many pounds of tension the all day one that's about $20 will reach?

Depending on how the product is built and how dependable the product is for a certain weight load. For example, the SiliStretcher knockoff will have a weight load around 4 to 6lbs before the screw eyelet comes flying off. If you are unfortunate, your toes will be the victim if the weight drops. The vacuum system for the extender you see among the attached photos have a traction force loading around 5lbs. If they say the product can support higher, make sure other users are verifying this. You need at least 10 people confirming the higher traction load to believe it. The noose and strap type can go as high as 15lbs, but it can get very uncomfortable within 30 minutes.

And for the second one will this allow me to pull my penis even higher than the stretcher I already have? Which will be in pics too. TYVM for any answers because of the all day stretcher doesn't go as high as the one I have now I will probably not buy and the one with vacuum that's normal stretcher if I can't full my penis further because the cup then I may not buy but then in these cases I would lean towards investing in weights instead of either

Once again, how high of a weight load do you want to have for hanging? If it's more than 6lbs, skip that SiliStretcher knockoff unless you are willing to spend a bit more money to get some parts and modify it. I modified the knock-off for fun as well, and I know exactly what to do for another $15 (tools + hardware). If you're hanging, the vacuum cup system may, and the keyword is "may" support the weight load you're looking for. But you still have to verify it from other Amazon buyers. The SiliStretcher here already have been verified by quite a few brothers here to exceed 40lbs. I'm one of them, and with a blister to suffer through as well.

Let us know if you need more info.
 
Upvote 0
TYVM for your answers and I also apologize for posting so many questions I can't find any other place people reply so fast and I am on a budget living to buy more expensive PE things as of right now. For the weight I want is at the least what my traction device in the last pic can go to, the one I use now and on another forum someone commented it should go around 2.5lbs, so if the Amazon all day cheapo ones can go up to at least that I'll prob buy them but if any less I may not buy them.
 
Upvote 0
TYVM for your answers and I also apologize for posting so many questions I can't find any other place people reply so fast and I am on a budget living to buy more expensive PE things as of right now.

We all understand completely. Most of us started with a poor man's budget for PE. Myself included. We're here to help and not harass or belittle you brother. We'll answer as many ways as we can to allow you to decide. However, we are always providing the safest approaches first to protect you and any brothers that don't have much budget for PE. I wish there was help like this when we all started out.

For the weight I want is at the least what my traction device in the last pic can go to, the one I use now and on another forum someone commented it should go around 2.5lbs, so if the Amazon all day cheapo ones can go up to at least that I'll prob buy them but if any less I may not buy them.

2.5lbs is the long traction weight loading. Meaning what? You should be wearing around 2.5lbs to 2.6lbs for as long as you can. HOWEVER! Every 3 to 4 weeks, or even 6 weeks, you want to increase and start the initial traction force 0.5lbs higher than 2.5lbs or 2.6lbs. Why? Your body will start to adopt the new weight limit, adapt to prolong traction limit, and accept the higher initial traction force to stretch, break the collagen bonds, and allow the lower traction limit of 2.5lbs to maximize the elongation. So, around 7 to 9 months mark, you may be using 5lbs to 7lbs of initial traction force/weight to loosen up the internal tissues, and use the 2.5lbs to keep the loosen tissues elongated for healing. This maximizes the growth level. This process has been proven over and over again under SRT and medical publication.

The reason why other medical devices tell you to stay at 2.5lbs all day is to prevent discomforts. The funny thing is, the direction also tells you to "insert additional rods as your tissues stretches over the course of the few hours". It's practically the same as having an initial higher traction force limit. You take care of that in the first 30 to 60 minutes rather than hours later.
 
Upvote 0
Even if it cost you more the SiliStretcher is the way to go. You can take advantage using code MOS18 to get 18% off your order. If you still can't afford it save up to get the best rather than messing around with other and getting worse.
 
Upvote 0
We all understand completely. Most of us started with a poor man's budget for PE. Myself included. We're here to help and not harass or belittle you brother. We'll answer as many ways as we can to allow you to decide. However, we are always providing the safest approaches first to protect you and any brothers that don't have much budget for PE. I wish there was help like this when we all started out.



2.5lbs is the long traction weight loading. Meaning what? You should be wearing around 2.5lbs to 2.6lbs for as long as you can. HOWEVER! Every 3 to 4 weeks, or even 6 weeks, you want to increase and start the initial traction force 0.5lbs higher than 2.5lbs or 2.6lbs. Why? Your body will start to adopt the new weight limit, adapt to prolong traction limit, and accept the higher initial traction force to stretch, break the collagen bonds, and allow the lower traction limit of 2.5lbs to maximize the elongation. So, around 7 to 9 months mark, you may be using 5lbs to 7lbs of initial traction force/weight to loosen up the internal tissues, and use the 2.5lbs to keep the loosen tissues elongated for healing. This maximizes the growth level. This process has been proven over and over again under SRT and medical publication.

The reason why other medical devices tell you to stay at 2.5lbs all day is to prevent discomforts. The funny thing is, the direction also tells you to "insert additional rods as your tissues stretches over the course of the few hours". It's practically the same as having an initial higher traction force limit. You take care of that in the first 30 to 60 minutes rather than hours later.
I would love to get to the point instead of stretching at 2.5lbs for 2-3 hours a day, rarely skipping a day, well 2lbs much of the time for an hour to ninety min of it, I would love to one day just get it done in like 30min I guess is have to do 10lbs which I never plan on trying because I don't want to pull my penis off. Those things on YouTube like baseem always talks about apex extender and other long ass ones he n others say thirty min to one hour a day is all your suppose to do but it might also be my last time using my penis after that 30min
 
Upvote 0
I would love to get to the point instead of stretching at 2.5lbs for 2-3 hours a day, rarely skipping a day, well 2lbs much of the time for an hour to ninety min of it, I would love to one day just get it done in like 30min

If you want to be done in 30 minutes, the only mechanical device that can get you there is the Length Master. But you have to wrap for the rest of the day to keep the penis elongated.

I guess is have to do 10lbs which I never plan on trying because I don't want to pull my penis off.

Then the 2.5lbs devices will not work. You need something fast and heavy if you want to only go for the 30 to 90 minutes route. But this will take you at least 2 to 3 months of adjustment before you can pull like madman. Otherwise, you will injure yourself.

Those things on YouTube like baseem always talks about apex extender and other long ass ones he n others say thirty min to one hour a day is all your suppose to do but it might also be my last time using my penis after that 30min

False promises, and I can bet my entire penis on it.
 
Upvote 0
General chit-chat
Help Users
  • MoS Notifier MoS Notifier:
    afei is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    DickmanBigman is our newest member. Welcome!
  • oldandlively @ oldandlively:
    @NorfolkPumper, Sorry to have missed you brother. Most of the time, we post to chat rather than chat in this chat box. We spend most the time among the forums to read up on posts.
    Quote
  • MoS Notifier MoS Notifier:
    buxus is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Hupapak is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    culturatidecor is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    PenisStroker88 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Faz is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Khepri33 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    danetta is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    zlc928 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    weaver71 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Romancebysammy is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    topg1 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    tottoro22 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Mgirth90 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Jc Ppb is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    will9 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    ant* is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Xpress0705 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Marqymarq33 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    relkel is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    adam9089 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Firozking is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Gladness_Night is our newest member. Welcome!
      MoS Notifier MoS Notifier: Gladness_Night is our newest member. Welcome!
      Back
      Top