Lengthmaster Comfort

wakingdream · Jul 13, 2023

I have an old wooden Lengthmaster. I haven't used it very much because it gets uncomfortable, or takes way too long to find a comfortable grip. I'm used to intense manual stretches, so in order to feel the same amount of pull on my penis, I have to clamp the Lengthmaster down too tight, which cuts off the blood flow. Or a little bit of skin gets pinched and I have to take the whole thing off and unwrap and try to start over.
Does the new Lengthmaster 3 have any new improvements in that area? Or should I use a Sleeve or anything?

I have a similar comfort issue with my old SG Extender. Is it possible to buy JUST a vacuum bell cup to attach to either my Lengthmaster or my SG Extender?

DLD · Jul 13, 2023

You would be best buying the new Lengthmaster as it has many improvements. The wooden Lengthmaster is 3 generations behind. As far as SizeGenetics is concerned I am not sure but what I do know is you can buy the spare parts on ebay.

DLD · Jul 13, 2023

Also the difference between the SizeGenetics and SiliStretcher are many. The SiliStretcher gives much strength and extreme comfort. If you are in the market for new equipment it is all on sale right now at 18% off using coupon code MOS18

wakingdream · Jul 17, 2023

DLD said:
You would be best buying the new Lengthmaster as it has many improvements. The wooden Lengthmaster is 3 generations behind.

Thanks. What are the improvements? Will I still have to wrap? Sorry, it's been years since I've hung around the forums

DLD · Jul 17, 2023

Wrap is important bur easy to do. I suggest you check out wrapping video that @squirt_inducer_man

wakingdream · Jul 18, 2023

DLD said:
The SiliStretcher gives much strength and extreme comfort.

What do you mean by strength? intense stretching?

DLD · Jul 18, 2023

wakingdream said:
What do you mean by strength? intense stretching?

It is a much more comfortable Chamber... This allows for much more strength in the stretches and much more intensity

squirt_inducer_man · Jul 19, 2023

wakingdream said:
I have an old wooden Lengthmaster. I haven't used it very much because it gets uncomfortable, or takes way too long to find a comfortable grip.

Get the newest model, LENGTHMASTER 3. You won't regret it.

BFL · Jul 19, 2023

@DLD .. Suggestion for next version of LM or sooner

.. Offer an optional larger carved out area where the penis is clamped down for those that are on the larger side and for those on the way to being there as an upgrade. The way the LM3 is now and as I clamp down the skin starts to roll out on the sides which make it more uncomfortable. I have read people have modded theirs but I would have preferred to buy one already done.

Maybe listed as Girths 5.25 inches and larger for the optional larger size unit

DLD · Jul 19, 2023

BFL said:
@DLD .. Suggestion for next version of LM or sooner.. Offer an optional larger carved out area where the penis is clamped down for those that are on the larger side and for those on the way to being there as an upgrade. The way the LM3 is now and as I clamp down the skin starts to roll out on the sides which make it more uncomfortable. I have read people have modded theirs but I would have preferred to buy one already done.

Maybe listed as Girths 5.25 inches and larger for the optional larger size unit

I will send this to sales. When we go to upgrade the length master. I will start a thread with everybody's suggestions.

squirt_inducer_man · Jul 19, 2023

BFL said:
@DLD .. Suggestion for next version of LM or sooner.. Offer an optional larger carved out area where the penis is clamped down for those that are on the larger side and for those on the way to being there as an upgrade. The way the LM3 is now and as I clamp down the skin starts to roll out on the sides which make it more uncomfortable. I have read people have modded theirs but I would have preferred to buy one already done.

Maybe listed as Girths 5.25 inches and larger for the optional larger size unit

Good suggestion. But in this moment. You can put a piece of fabric on the bottom part of the chamber to prevent pinching. I have the same problem as you have.

orgasmic19 · Jul 20, 2023

DLD said:
I will send this to sales. When we go to upgrade the length master. I will start a thread with everybody's suggestions.

I would buy it!

Agree a wider and deeper curve to avoid less pinching.

squirt_inducer_man · Jul 20, 2023

orgasmic19 said:
I would buy it!

Agree a wider and deeper curve to avoid less pinching.

I believe the current LENGTHMASTER 3 is good in that regard. I'm not sure you can get rid of all the pinching. But maybe you can make the hollow out area better and a little bit wider. But some pinching may be good, so you get a solid grip of your penis and can stretch hard.

squirt_inducer_man · Jul 20, 2023

Try this. Put a piece of fabric on the bottom part of the chamber. This was a game changer for me.

orgasmic19 · Jul 20, 2023

The theraband attached to your chamber work ?

orgasmic19 · Jul 20, 2023

@squirt_inducer_man is it attached the top chamber only ?

squirt_inducer_man · Jul 20, 2023

orgasmic19 said:
The theraband attached to your chamber work ?

Yes! More friction.

squirt_inducer_man · Jul 20, 2023

orgasmic19 said:
@squirt_inducer_man is it attached the top chamber only ?

THERABAND on both the top and bottom part of the chamber. Just fixate it with rubber bands.

squirt_inducer_man · Jul 20, 2023

@orgasmic19, with the piece of fabric it will be more comfortable for your scrotum as well.

orgasmic19 · Jul 20, 2023

squirt_inducer_man said:
@orgasmic19, with the piece of fabric it will be more comfortable for your scrotum as well.

What kind of fabric is that? Where can I get it?

squirt_inducer_man · Jul 20, 2023

orgasmic19 said:
What kind of fabric is that? Where can I get it?

It's just an piece of an old rag. It's originally for removing the water on your car, after you have washed it. It's not leather. I got it from a gas station. Maybe leather will be even better?

DLD · Jul 20, 2023

squirt_inducer_man said:
Try this. Put a piece of fabric on the bottom part of the chamber. This was a game changer for me.

View attachment 1833507

I love the homemade accessories. It's like the bride of Frankenstein.

wakingdream · Jul 21, 2023

Since it sounds like the LM3 still has the same comfort problems, I'm still not sure what the difference is from the LM1. Can someone actually describe the differences to me?

As for the SiliStretcher, how common is it to get blisters or irritation from the suction cup?

squirt_inducer_man · Jul 21, 2023

wakingdream said:
Since it sounds like the LM3 still has the same comfort problems, I'm still not sure what the difference is from the LM1. Can someone actually describe the differences to me?

As for the SiliStretcher, how common is it to get blisters or irritation from the suction cup?

I have NO comfort problems at all with the LENGTHMASTER 3.

wakingdream · Jul 21, 2023

squirt_inducer_man said:
I have NO comfort problems at all with the LENGTHMASTER 3.

Yes perhaps, but not until after you've modified it quite a bit, as shown in this thread and your pictures. That is what I have to do with the OG lengthmaster. So again, I ask what is the difference between the 2 models?

I'm not suggesting that there's anything better or that the LM could be made better. MoS absolutely has the best products and I'm more than willing to support DLD by buying stuff. I just want to understand the product.

DLD · Jul 21, 2023

There were modifications between the lengthmaster 2 and 3. A wider chamber and the curvature of the arms

BFL · Jul 21, 2023

You may get blisters from the silistretcher, however since I started wearing Tegaderm on the glans I have been blister free. Hopefully it stays way!

DLD · Jul 21, 2023

BFL said:
You may get blisters from the silistretcher, however since I started wearing Tegaderm on the glans I have been blister free. Hopefully it stays way!

That's great! I will have to try

orgasmic19 · Jul 21, 2023

DLD said:
There were modifications between the lengthmaster 2 and 3. A wider chamber and the curvature of the arms

That’s Good to know! All I need is a chamber than.

DLD · Jul 21, 2023

Yes indeed

squirt_inducer_man · Jul 22, 2023

wakingdream said:
Yes perhaps, but not until after you've modified it quite a bit, as shown in this thread and your pictures.

The only thing I have done for comfort is to lay a piece of fabric on the bottom part of the chamber, and I'm using a good wrap. I have videos about my wrap.

You find these videos in the thread:

SIM's videos and instructions.

DLD · Jul 22, 2023

squirt_inducer_man said:
The only thing I have done for comfort is to lay a piece of fabric on the bottom part of the chamber, and I'm using a good wrap. I have videos about my wrap.

You find these videos in the thread:
SIM's videos and instructions.

Such a simple but effective modification

wakingdream · Jul 24, 2023

BFL said:
You may get blisters from the silistretcher, however since I started wearing Tegaderm on the glans I have been blister free. Hopefully it stays way!

Do the blisters come from having it on too long? Or from too high of tension?
Do some guys get lucky and not have this problem at all?

DLD · Jul 24, 2023

They come when air gets under the skin an there too much intensity

BFL · Jul 24, 2023

Also use minimal vacuum you can get away with yet still keeps the glans from sliding out.

Lengthmaster Comfort

0

Double Long Daddy, The Guru

Double Long Daddy, The Guru

0

Double Long Daddy, The Guru

0

Double Long Daddy, The Guru

(SIM)

Active member

Double Long Daddy, The Guru

(SIM)

0

(SIM)

(SIM)

0

0

(SIM)

(SIM)

(SIM)

0

(SIM)

Double Long Daddy, The Guru

0

(SIM)

0

Double Long Daddy, The Guru

Active member

Double Long Daddy, The Guru

0

Double Long Daddy, The Guru

(SIM)

Double Long Daddy, The Guru

0

Double Long Daddy, The Guru

Active member