Larger tube = more ballsack suction issues?

S

StonerWithABoner

Active member
I'm a longtime X30 user and considering buying an X40 (or hydro9). Had my first experience using the X30 with a silicap on, and it was GREAT, except for the fact that the thickness of the cap made my expanded cockhead big enough to touch the sides all the way around. That made for a situation where my dick wouldnt extend its full length because the cap was "stuck" to the tube walls.

That said, I've always had a top-heavy cock, and my shaft is not particularly thick (4.7 meg). So I am concerned about using a tube that's a whole lot larger than my base girth.

Anyone experienced using a bathmate that they weren't thick enough for at the base? Is the ball suction factor worse? Any other observations?

I'm definitely not holding my breath waiting for the industry to produce a hydropump that tapers their tube in the opposite direction for a penis like mine.
 
We have a brand new pump called the mityvac that’s a Hydro/air pump. It’s base ring will not allow any scrotal suction. It’s a great pumpkin you should check it out. When using the bathmate and this happens it’s smart to tie back your scrotum using something like ACE or simply pump your whole package.
 
Thanks, I'll look into the mityvac. That said, I've had a great experience with the X30 and tearing me away from the bathmate brand would be an uphill battle. lol

I'm just wondering if, in general, larger tube = more ball suction issues. I've really only used the X30 and a standard 2" air pump tube, and faced only minor balls issues with each.
 
A larger tube is going to have a larger opening so there will be more suck in if you have that issue. But I have some good advice that will help you avoid that and let you stay with the bathmate line as you desire. The testicle health massage and stretch will quickly bring separation of your scrotum and the base of your shaft allowing for your testicles to hang lower and your penis to hang longer and heavier. If you’d like to keep your scrotum from being sucked into the bathmate simply tied back your scrotum with an ace bandage and you’ll be all set.
 
You guys are so fast here! Missed my opportunity! :P

But I do concur, a larger diameter cylinder might cause more ball sucking issues if the cylinder opening isn't fit properly just for your cock with a sleeve or another method.
Testicle health massage helps and so does a ball stretcher ring.

For me I wouldn't see it as an uphill battle to go for the Mityvac. I'm curious about different tools and having used BM for such a long time, I am aching for experiences. :)
 
DLD said:
Always and forever my brother
Click to expand...

giphy.gif
 
arkailija said:
You guys are so fast here! Missed my opportunity! :p

But I do concur, a larger diameter cylinder might cause more ball sucking issues if the cylinder opening isn't fit properly just for your cock with a sleeve or another method.
Testicle health massage helps and so does a ball stretcher ring.

For me I wouldn't see it as an uphill battle to go for the Mityvac. I'm curious about different tools and having used BM for such a long time, I am aching for experiences. :)
Click to expand...

Posts go so quickly here it’s like a live chat! LOL
 
As has been said, the larger opening will always bring the risk of sucking in the entire package.

The bathmate is very good, but the mityvac is much more versatile, in that you can add different suction caps at the entrance to create more, or less space for your penis, which for some can prevent the balls getting dragged in.

You could try full package pumping, go slowly with one testicle at a time, it really isn't anything to worry about, and from the sounds of it, your pump has ample room .. its more a concern if its tight, and the balls can push against the inside, which causes discomfort.

I find that allowing the whole lot inside, helps to target the inner penis more, that lies in the area of the perineum, and if you perform stretches in the bathmate, they will be more forceful this route.

My advice, sorry if it seems me pushing you into sales, but, save up for a mityvac and you wont regret that.

Its not only hydro, but can be used dry, so for days you cant be bothered with the bath or shower its awesome! also remember that lifetime gurantee, and support from MOS! the states has the best customer service for a reason.
 
REDZULU2003 said:
I find that allowing the whole lot inside, helps to target the inner penis more, that lies in the area of the perineum, and if you perform stretches in the bathmate, they will be more forceful this route.
Click to expand...

Bingo! I couldn't really put into words what I feel might be happening, but this explains it perfectly. There's a definite 'pull' of my 'innards' and I can use very high pressures with minimal discomfort pumping in this fashion
 
Just make sure you have enough room in the cylinder, with me because the Goliath the Wideboy7 are ... big, it was always going to be good for that, however if you choose a cylinder that fits you for pumping, it may cause discomfort ... what I'm saying is, that you need to allow more extra room when you whole package pump.

Some have suggested its a fetish or dangerous, but I disagree with the latter, perhaps a fetish to some, not myself though.

The only times you would need to worry, are if you are in a very small cylinder and you get pain, or if you pull too hard on the cylinder, and it yanks at the spermatic cord, which has never happened to me, but you always get one who overdoes it.

Like all methods you need to have precautions in place, be safe. I certainly noticed feeling more horny when I pump whole package, and my balls look better ... never had a single issue doing it.
 
  • Like
Reactions: DLD
I think that we should make a scrotum sleeves to hold back the scrotum during exercises that may affect it. It may also be a really smart way to lengthen and enlarge the scrotum. Maybe @Lightning and I can come up with something, it will be the first of its kind
 
I just looked and there is no sleeves that do what I’m asking them to do so I’ll say it again I think it’s really smart for us to make a sleeve that goes over the scrotum for many applications.
 
Oh, I thought this thread was about preventing the balls from being sucked into the pump while pumping and a solution was needed for that. I use to have this issue as well when I pumped, this is why I included the pump sleeve with the MityVac so the user has the option to use it or not.

What does a scrotum sleeve do?
 
Lightning said:
Oh, I thought this thread was about preventing the balls from being sucked into the pump while pumping and a solution was needed for that. I use to have this issue as well when I pumped, this is why I included the pump sleeve with the MityVac so the user has the option to use it or not.

What does a scrotum sleeve do?
Click to expand...

I’m not talking at the mityvac, I’m talking about the bathmate when I’m talking about being sucked in. Obviously the mityvac has a ring that prevents this. A sleeve in addition to it helping bathmate users there’s many other applications that it could serve like scrotum lengthening. Just a thought.
 
DLD said:
I’m not talking at the mityvac, I’m talking about the bathmate when I’m talking about being sucked in. Obviously the mityvac has a ring that prevents this. A sleeve in addition to it helping bathmate users there’s many other applications that it could serve like scrotum lengthening. Just a thought.
Click to expand...

Oh, I think our sleeve can work on the Bathmate as well. I will try it on the Goliath and the wideboy
 
I didn't realize that the wideboy was a thing. I'm just a touch past the 7 inch mark when fully pumped up in the X30, so I don't really need the extra length the X40 provides any time soon. I have options to consider...
 
Confirmed, our MitySleevs work on all penis pump cylinders including the Bathmates to prevent the balls from being sucked into the pump cylinder when pumping.

The MitySleev creates an extra secure seal between your pump cylinder and penis by gripping the base of your penis.Tested with Bathmate Hercules, X30, Goliath and the WideBoys along with the Penomets. This is an awesome solution for all pump sizes and brands. You can use the MitySleev with the SiliSleev and SiliCap and get the best of all worlds!

View attachment 1820044View attachment 1820042View attachment 1820047
View attachment 1820045View attachment 1820046
View attachment 1820049
View attachment 1820048
 
Last edited:
Yes, we just added them and they are in stock ready to ship.

The great thing about the MitySleev is that they don't interfere with the gator on the Bathmate and the adhere right to it. They also provide extra cushion and seal against the pelvic. No need to shave the pubes anymore because the MitySleev creates a seal around the base of your penis not against the pelvic area. They work on every pump on the market.
 
Lightning said:
Confirmed, our MitySleevs work on all the Bathmates & Penomet pumps to prevent the balls from being sucked into the pump cylinder.

The MitySleev creates an extra secure seal by gripping the base of your penis. We tested Bathmate Hercules, X30, Goliath and the WideBoy along with the Penomet. This is an awesome solution for all pump sizes and brands. And you can use the MitySleev with the SiliSleev and get the best of all worlds!



View attachment 1820044View attachment 1820042View attachment 1820047
View attachment 1820045View attachment 1820046
View attachment 1820049
View attachment 1820048
Click to expand...


You are a GENIUS! this is priceless, that it can be used across those products.
 
Lightning said:
Yes, we just added them and they are in stock ready to ship.

The great thing about the MitySleev is that they don't interfere with the gator on the Bathmate and the adhere right to it. They also provide extra cushion and seal against the pelvic. No need to shave the pubes anymore because the MitySleev creates a seal around the base of your penis not against the pelvic area. They work on every pump on the market.
Click to expand...


So if I buy the X50 extreme, the mitysleev will help prevent my balls from joining the party. I will buy some mitysleev together with my X50 extreme very soon.
 
I wanted to chime in for a moment: I'm actually taking a leap and I got the bigger cylinder Mityvac to enable whole unit pumping! :)
I've been fascinated by it for a while and soon enough I get to do it! I recall @REDZULU2003 has done whole package pumping with a Goliath to my best memory.

I've personally used wide cockrings (almost like ballstretchers) to eliminate the ball suckage so far. The Mitysleeve looks really good regarding that aspect. Considering the cylinder I ordered is on the big size, I can try the Mitysleeve with some of my hydropumps.
Could even have a set where I first do just penis pumping and then advance to the bigger cylinder.
Oh the possibilities! :)
 
You must log in or register to reply here.
Back
Top