Good stretch last night - new technique

[BFL]

So, took a 35lb resistance band and put a good portion of it under the mattress and looped over the mattress and I attached the other end to the bell. Trial and error to find the right amount of length that will give a good stretch but not be too much, and it worked great! It's like weight hanging while u sleep but no weights involved. The key is to use a stiff sleeve so u don't get slip.

 

[DLD]

So, took a 35lb resistance band and put a good portion of it under the mattress and looped over the mattress and I attached the other end to the bell. Trial and error to find the right amount of length that will give a good stretch but not be too much, and it worked great! It's like weight hanging while u sleep but no weights involved. The key is to use a stiff sleeve so u don't get slip.

Very Very !

 

[squirt_inducer_man]

It's amazing you can sleep with the SiliStretcher. I move to much in my sleep, for it to be possible.

 

[BFL]

It's amazing you can sleep with the SiliStretcher. I move to much in my sleep, for it to be possible.

It actually feels really good wearing especially when u get it set up right and the key is to avoid slippage at that much pulling force.

 

[squirt_inducer_man]

It actually feels really good wearing especially when u get it set up right and the key is to avoid slippage at that much pulling force.

That sounds really good.

 

[BFL]

That sounds really good.

Takes time to get used to wearing at night.. Some nights I only get an hour or 2 before I get discomfort... I have determined the bell size and finding the best sleeve and stiffness are key.

 

[BFL]

For me, a 1.75 inch original silistretcher bell would be ideal if they would offer it, but I managed between the 1.5 inch original bell and the 2inch silistretcher 2 bell. The issue with the ss2 bell is the piston takes up a lot of room and can't really get glans all the way in the bell.

 

[squirt_inducer_man]

For me, a 1.75 inch original silistretcher bell would be ideal if they would offer it, but I managed between the 1.5 inch original bell and the 2inch silistretcher 2 bell. The issue with the ss2 bell is the piston takes up a lot of room and can't really get glans all the way in the bell.

Have you written a review on MOS Shop about it? I will write some reviews about the LENGTHMASTER 3 and MOS-RED in the future (after I have really good user experience). These reviews will be detailed.

My purpose always when I write a review is to point out the good things, but also to make suggestions of improvements (if there are any).

I think they would listen to you, and take your review into consideration when they improve the product/device. I get a feeling you have used the SiliStretcher for some time?

But you may have already written a review?

 

[BFL]

Have you written a review on MOS Shop about it? I will write some reviews about the LENGTHMASTER 3 and MOS-RED in the future (after I have really good user experience). These reviews will be detailed.

My purpose always when I write a review is to point out the good things, but also to make suggestions of improvements (if there are any).

I think they would listen to you, and take your review into consideration when they improve the product/device. I get a feeling you have used the SiliStretcher for some time?

But you may have already written a review?

I have not done the reviews yet.. I have been using the silistretcher for 8 months or so

 

[DLD]

I have not done the reviews yet.. I have been using the silistretcher for 8 months or so

Give it a review

 

[huge-girth]

It actually feels really good wearing especially when u get it set up right and the key is to avoid slippage at that much pulling force.

Sleep facing up seems to be the only good option for this.

 

[BFL]

Sleep facing up seems to be the only good option for this.

I also sleep on my side with it on.. Dont forget the bell clip swivels 360

 

[DLD]

Can't wait for results

 

[squirt_inducer_man]

@BFL, You can make video guides for this setup of yours. We need more video instructions.

 

[BFL]

Here is a Pic of how I have it setup. The silistretcher comes with a strap to use until you decide you want more intensity as I did in the Pic using a 35lb resistance band. Simply take the velcro portion and stick between the mattress and box spring.

 

[squirt_inducer_man]

Here is a Pic of how I have it setup. The silistretcher comes with a strap to use until you decide you want more intensity as I did in the Pic using a 35lb resistance band. Simply take the velcro portion and stick between the mattress and box spring. View attachment 1833148

Awesomeness.

 

[squirt_inducer_man]

You use the stiffest sleeve?

 

[BFL]

The silistretcher come with everything u need. By using a band or the strap it comes with it is Thin enough to not interfere with my legs at night

 

[BFL]

You use the stiffest sleeve?

I try to use one stiff enough to hold me while only using minimum vacuum on the glans being that it will be for many hours at a time

 

[squirt_inducer_man]

The silistretcher come with everything u need. By using a band or the strap it comes with it is Thin enough to not interfere with my legs at night

Okey. Maybe I should try this later on in my journey. It would have been nice to get a longer flaccid.

 

[squirt_inducer_man]

By the way are your penis straight or do you have a banana shape/curve to it. My fear is that an all day stretcher/all night strecher would remove my curvature.

 

[BFL]

Okey. Maybe I should try this later on in my journey. It would have been nice to get a longer flaccid.

Takes time to get used to it and experimentation to see what bell, sleeve, and tension works for u

 

[BFL]

By the way are your penis straight or do you have a banana shape/curve to it. My fear is that an all day stretcher/all night strecher would remove my curvature.

I would straight to slight up

 

[squirt_inducer_man]

I would straight to slight up

Okey

 

[squirt_inducer_man]

Thanks for sharing this. I believe we need brorhers who are doing things a little diffrent, from the common view of how one should do things.

 

[BFL]

The biggest challenge is using a stiff sleeve.. They are a pain getting on and off. Sometimes I go up in diameter and slip it on over a couple cut pieces of smaller sleeve to aid in traction.

 

[DLD]

Loving it

 

[huge-girth]

By the way are your penis straight or do you have a banana shape/curve to it. My fear is that an all day stretcher/all night strecher would remove my curvature.

If you use the all day stretcher always against the curve, it can remove or reduce the curve. But if you stretch to both sides equally, your curve will be intact.

 

[squirt_inducer_man]

If you use the all day stretcher always against the curve, it can remove or reduce the curve. But if you stretch to both sides equally, your curve will be intact.

Okey thanks. As I thought. I will not risk it at this point. Maybe later I can only do ADS, but then I need to be very conscious of how I use the ADS.

 

[huge-girth]

Okey thanks. As I thought. I will not risk it at this point. Maybe later I can only do ADS, but then I need to be very conscious of how I use the ADS.

Alright brother.

 

[Alparslan34]

So, took a 35lb resistance band and put a good portion of it under the mattress and looped over the mattress and I attached the other end to the bell. Trial and error to find the right amount of length that will give a good stretch but not be too much, and it worked great! It's like weight hanging while u sleep but no weights involved. The key is to use a stiff sleeve so u don't get slip.

do you sleep like this

 

[DLD]

Are you experiencing any issues with this?

 

[BFL]

do you sleep like this

Yes..

 

[BFL]

Are you experiencing any issues with this?

Only for the fact that I am in between sizes.. The 1.5 bells are snug (guess that's a good thing), but the 2 inch bell is large only in the fact that it is tearing up my sleeves. The sleeve needs to be loose enough to fit the bell yet tight enough on the other end to fit snug on the shaft. I have tried a few brands of sleeves to rectify the issue and may have found one that works. When working properly it feels like I am weight hanging without the weights.

If mos had 1 1/8" sleeves it would be helpful. For me the 1 inch sleeve 5 and Duro are too tight and are pia to remove without getting a blister. So, for mos brand I can only use the softer silisleev 2.

 

[DLD]

Only for the fact that I am in between sizes.. The 1.5 bells are snug (guess that's a good thing), but the 2 inch bell is large only in the fact that it is tearing up my sleeves. The sleeve needs to be loose enough to fit the bell yet tight enough on the other end to fit snug on the shaft. I have tried a few brands of sleeves to rectify the issue and may have found one that works. When working properly it feels like I am weight hanging without the weights.

If mos had 1 1/8" sleeves it would be helpful. For me the 1 inch sleeve 5 and Duro are too tight and are pia to remove without getting a blister. So, for mos brand I can only use the softer silisleev 2.

Have you tried baby powder for the tight sleeves
Works great when putting on a sleeve and removing it

 

[BFL]

Have you tried baby powder for the tight sleeves
Works great when putting on a sleeve and removing it

Yes, I have. I have gown enough to find the stiffer 1 inch sleeves are just too tight. I find 1.25inch ones are OK as ADS but not for hanging. I would love to see mos offer a 1 1/8. For now 1 inch soft sleeves are my best option.

I noticed some of the other brands offer 1 1/8 & 1 1/4 inch sleeves but not enough grip to use with a silistretcher, but will work as a ADS.

 

[DLD]

Yes, I have. I have gown enough to find the stiffer 1 inch sleeves are just too tight. I find 1.25inch ones are OK as ADS but not for hanging. I would love to see mos offer a 1 1/8. For now 1 inch soft sleeves are my best option.

I noticed some of the other brands offer 1 1/8 & 1 1/4 inch sleeves but not enough grip to use with a silistretcher, but will work as a ADS.

We need to make a new mold to create a new size and it is expensive. On the next redesign we will make.that size

 

[Alparslan34]

Yes..

she said that yawning at night is harmful because night erections are strong
I read that in a dld article
@DLD ?

 

[DLD]

she said that yawning at night is harmful because night erections are strong
I read that in a dld article
@DLD ?

I don't remember can you give me a link to the study?

 

[BFL]

she said that yawning at night is harmful because night erections are strong
I read that in a dld article
@DLD ?

A second reason I don't like sleevs that are too tight.. I prefer ones that are strong enough to hold the bell in place without being restrictive plus I use as little vacuum as I can get away with for the bell itself. It's really trial and error to see what works for u.

 

[Alparslan34]

I don't remember can you give me a link to the study?

I couldn't find the link, but I remember very well, I saw it as your comment on something.

 

[orgasmic19]

I don't remember can you give me a link to the study?

Yawning I’m so confused

 

[orgasmic19]

@Alparslan34 I think I know what you are saying.

 

[orgasmic19]

In the morning mans testosterone is high even before he wakes up his testosterone is at his peak. That's because the pituitary gland -which governs the production of the male sex hormone -has been switched on in the night and levels have been steadily rising until dawn which likely encourages those nightly erections.

Thanks to a friend of mine this is something new!

This may relate why PE could be harmful at night when sleeping.

 

[BFL]

In the morning mans testosterone is high even before he wakes up his testosterone is at his peak. That's because the pituitary gland -which governs the production of the male sex hormone -has been switched on in the night and levels have been steadily rising until dawn which likely encourages those nightly erections.

Thanks to a friend of mine this is something new!

This may relate why PE could be harmful at night when sleeping.

True and why I prefer to use larger sleeve and bell... I can tell in the night when using the 1. 5 inch bell that I was maxing out it's capacity. The 2 inch bell gives me room and the sleeve I have started using is looking very promising as it is very grippey yet very soft and expands well. Unfortunately it's not a mos product. I have tried several brands and various sizes and thickness.

 

[squirt_inducer_man]

In the morning mans testosterone is high even before he wakes up his testosterone is at his peak. That's because the pituitary gland -which governs the production of the male sex hormone -has been switched on in the night and levels have been steadily rising until dawn which likely encourages those nightly erections.

Thanks to a friend of mine this is something new!

This may relate why PE could be harmful at night when sleeping.

You're a nerd I like that. I'm one as well.

 

[orgasmic19]

You're a nerd I like that. I'm one as well.

Thanks