DIY Genius *Build it, they will CUM*

T

TuffDong

Well-known member
Alright. .. let's do this.

Throw your ideas in the hat. I have plenty, so let's put our heads together.

***Ideas formed within this thread are the intellectual property of the individual offering said design/concept/blueprint. If said design is put into development, ACKNOWLEDGMENT MUST BE GIVEN TO THE GENIUS MIND WHO CONCEPTUALIZED IT!!!

@F26 , take off your monocle, and throw your top hat in the ring, brother. ..
 
giphy.gif

giphy.gif
 
There are certain concepts that I will keep details to "hush hush", until I have a fully functioning prototype, built and tested.

The Tuff brand has been born.. ???
 
  • Love
Reactions: F26
Great idea! And all of this data will belong to the brotherhood, each one of us has our stake in this. This will be a very good thread for lightning and myself to get ideas.
 
A device that attached to the penis, but works by directly isolating the suspensory ligament at the base.

We know hands only exercises can do this, but if a device could bypass the weak points such as the glans, excessive shaft and skin, just targets the ligaments at the base.

Also, rigging up a MOS thickwall so it becomes a vacuum hanger.
 
An MOS thickwall unfortunately won't be involved, as I do not own one. My ideas will be completely FRESH, and any current purchaseable product WILL NOT be a part of my prototypes...
 
Not my ideas, but a little write-up of some members who already have done a DIY device construction:

Lengthmaster:
@smooth_op : https://mattersofsize.com/threads/homemade-length-master.47009/
@bandit2010 : https://mattersofsize.com/threads/can-you-guess-what-i-am-making.68949/

FATS - Device:
@TuffDong : https://mattersofsize.com/threads/tuffdong-motivation.1819074/post-1861753

Extender/ADS:
@DLD : https://mattersofsize.com/threads/lock-hanging-ghetto-ads.1339/
@Blue Whale: https://mattersofsize.com/threads/homemade-cable-tie-belt-ads-stretch-the-end-of-all-ads-stretches.48364/
Total Man: https://www.youtube.com/watch?v=Z0QjQzK1N1I

Hanger:
@TuffDong : https://mattersofsize.com/threads/hanger-stands.1819868/post-1863222
@Haursen : https://mattersofsize.com/threads/hit-me-with-your-best-sock-haursens-diy-sock-hanger-guide.1818766
@Perestroyka : https://mattersofsize.com/threads/finished-creating-hanger-pics-in.1819321
Total Man: https://www.youtube.com/watch?v=Z0QjQzK1N1I
 
Last edited:
Thank you brother..... I have already trademarked the Tuff Brand name, as I have been sitting on an application for a few years.... mwahahahaha. Any concepts and prototypes from my head and workplace will be under my UMBRELLA. Ey!!! Ey!!!
 
  • Love
Reactions: F26
DIY Jelqing Jar Lifter Device like the one from P-E gym, but with options to change springs, so we could control the intensity.
The most sick jelqing construction would be a round circle construction instead of the 2 rolls, so we're jelqing the most possible volume of our dick in the same time. But well, that's some futuristic stuff.
 
Getbiglonger7 said:
We know hands only exercises can do this, but if a device could bypass the weak points such as the glans, excessive shaft and skin, just targets the ligaments at the base.

GAINS,GAINS! If that device can help the People here what else can we ask if that device gives us 1 inch in two months I d buy it LOL
Click to expand...

"Hellraiser hooks"....
 
I've had an idea, It's a pneumatic clamp. I've always found clamping to the last few teeth quite annoying, so i figure the technology they use for the heart pressure monitor (where the wrap the air cylinders around your arm) could be used on micro scale as an easy to use clamp.. and eventually even a hanger can be formed out of the technology if the materials are sturdy enough.
It would be so much simpler, just wrap up, apply the apparatus deflated, then once secured, a little plug-in pump could inflate the air-chamber to your desired tightness.
 
Is this thread ideas for MOS to chew over, maybe make happen, or, is this ideas for tuffdong to make at home?

I understood it as the former.
 
And if any of the concepts created by members end up materializing into a product, is MOS going to allow for a percentage of profit to the concept creators? Is MOS going to work with members?
 
I created this thread for ANYBODY who has creative genius, to put your ideas out there. I find, that multiple perspectives are FAR BETTER than a single one.

Anything I create myself, or build upon other designs, will be shared with detail to allow anyone with the know-how to create themselves. All of my current tools are layed out in my motivation thread.

If MOS was to create a more professional and much sleeker version of any of my tools, then that would only prove to myself that my ideas are valuable to the world of PE, and all of the men who are bettering themselves through devices and/or exercises.

The real payment here, my brothers, is growing ourselves inside, outward, and down to the damn GROUND.


giphy.gif
 
To each their own. Remember, this is the Internet, and anything posted is public information to be used and altered. Your only way of saving yourself from this, and being included in any profiting from your ideas is to either patent, copyright, trademark, etc, unless you have made an agreement IN WRITING, notarized and with lawyer present.
 
TuffDong said:
To each their own. Remember, this is the Internet, and anything posted is public information to be used and altered. Your only way of saving yourself from this, and being included in any profiting from your ideas is to either patent, copyright, trademark, etc, unless you have made an agreement IN WRITING, notarized and with lawyer present.
Click to expand...
Doesnt matter, the proof of concept is right in the forum. And if youre going to be an underhanded shit about it, i suggest people take this as a warning, and keep their ideas to themselves.
 
jekyllnhyde360 said:
Doesnt matter, the proof of concept is right in the forum. And if youre going to be an underhanded shit about it, i suggest people take this as a warning, and keep their ideas to themselves.
Click to expand...

Whoooa.... pump brother, please. I was merely stating the blatantly obvious of what goes on in this day and age.

I myself would never profit from somebody else's ideas without having that person on-board and right next to me. My way is the DIY way, and if I build it, then EVERYONE can as well.
 
I think nobody else than me has tried this:

It's such an simple recipe, ingredients can be ordered. I don't read about people using the EVO oil (Eroset's Vein Oil) either, even though it's great stuff.
And that is relatively simple as well, it has more ingredients though.

When you make either of these oils by yourself, the cost isn't too high. I've personally felt how important role certain oils or butters can play in skincare, be it your head, face, hands or down under ... But maybe others are born with perfect skin. :/
 
Alright, so I'm at work today, just holding things down and stretching it out. lol Wishing my hands weren't so greasy from the lotion I applied earlier in the day. Just not getting the optimum grip I need for some intense super bundled stretches. I would use some talc/cornstarch, or even MOSGrip if I had purchased it, but then my hands would get dried out, and my fingers are already splitting from this ridiculous weather that can't seem to make up its mind.

I get to thinking, I wish there was some sort of glove I could put on, to keep the moisture on my hands without causing this shitty slippy situation. It would have to be thin enough to still feel through the material, and could maybe have this superior sap built in that the MOSGrip utilizes. Could be sort of like a latex glove, in the way that it could be completely disposable if needed to chuck out in a jiffy......

@DLD @Lightning , would this be possible to develop? I do LOTS of manual work, and dislike always having to powder up... My skin is just, well......

giphy.gif
 
  • Like
Reactions: DLD
I've mentioned this in prior threads, but I would like to set it in stone here.

I have an idea for a cuff/clamp, which would take all the benefits of my cuff, while allowing a quick release. It is essentially just a cable clamp, but EXTRA WIDE. Picture the width of 2-3 clamps aligned. This, I'm sure could be easily 3D printed. It could be lined with silicone for added comfort and sticking power. Would eliminate pinching at the hinge.

I have seen GREAT RESULTS with my cuff routine, and would like a safer approach for the masses.
 
TuffDong said:
Alright, so I'm at work today, just holding things down and stretching it out. LOL Wishing my hands weren't so greasy from the lotion I applied earlier in the day. Just not getting the optimum grip I need for some intense super bundled stretches. I would use some talc/cornstarch, or even MOSGrip if I had purchased it, but then my hands would get dried out, and my fingers are already splitting from this ridiculous weather that can't seem to make up its mind.

I get to thinking, I wish there was some sort of glove I could put on, to keep the moisture on my hands without causing this shitty slippy situation. It would have to be thin enough to still feel through the material, and could maybe have this superior sap built in that the MOSGrip utilizes. Could be sort of like a latex glove, in the way that it could be completely disposable if needed to chuck out in a jiffy......

@DLD @Lightning , would this be possible to develop? I do LOTS of manual work, and dislike always having to powder up... My skin is just, well......

giphy.gif
Click to expand...

Have you tried MOSgrip?
 
TuffDong said:
I've mentioned this in prior threads, but I would like to set it in stone here.

I have an idea for a cuff/clamp, which would take all the benefits of my cuff, while allowing a quick release. It is essentially just a cable clamp, but EXTRA WIDE. Picture the width of 2-3 clamps aligned. This, I'm sure could be easily 3D printed. It could be lined with silicone for added comfort and sticking power. Would eliminate pinching at the hinge.

I have seen GREAT RESULTS with my cuff routine, and would like a safer approach for the masses.
Click to expand...

@stillwantmore had his MaleClamp, not sure if he still might have some left. That has a good width to it! It has a wingnut design that allows precise tuning when it comes to clamping. Strong tool for sure.
 
One-handed, travel LengthMaster. I need to figure something out. Need a gripping mechanism for the glans, and then the possibilities are endless.

No wingnuts. Maybe a vice clamp-like design... hmmm... gimme money... lol
 
You must log in or register to reply here.
Back
Top