Hello everyone new here I have some questions about traction/extender devices I have been seeing mixed information some say wearing 2 hours a day has made more results vs people people who wear it 5 hours + and then I see people also posting other way around that 5+ hours daily brings more results than 2 hours anyone have any input on this or suggestions ?
Solution
- Joined
- Jun 3, 2003
- Messages
- 126,193
Give it a try and I think you will feel more comfortable to go longer. You can also wear for an hour, take off and return good circulation and put back on for another hour. I would follow my advice and I think you will conquer this. If you want even more growth I highly recommend the LengthMaster - Penis Bundle Stretcher & Weight Hanging, this will help you grow so much faster.
Upvote
0
- Joined
- Feb 8, 2024
- Messages
- 2,229
Most traction and stretcher devices attempt to mirror many millennia old tribal penile tools. Yes, low traction for 5+ hours are required. Disconnect hours, like 2 in the morning and 2 in the night, will not generate continuous growth. At low traction force, around 800g, it will take 5+ hours to activate cell duplication and filling for the gaps. At 1.2kg to 1.3kg, it takes around 2 hours. The extra continuous hours you wear allows new cells to fill in the gaps at the micro meter levels. The longer you can wear at 1.2kg to 1.3kg, the fast you can grow. Passing 1.4kg, your growth also slows down due to fatigued stresses. Cellular regrowth or new growth can't keep up for too long. The magic is around 1.2 to 1.3kg at long hours.
Upvote
0
Solution
Interesting information thank you for the input unfortunately the one I have does not have weight info it is a screw system setup
Upvote
0
- Joined
- Feb 8, 2024
- Messages
- 2,229
Use a kitchen scale and press down on it. That will provide traction tension based on screw type without or lack of info.
Upvote
0
Sorry I don't understand what you mean by pressing down on kitchen scale can you elaborate a little more ?
Upvote
0
- Joined
- Feb 8, 2024
- Messages
- 2,229
Sure. Most screw systems have springs on both side of the base unit, or along the body of the screw. The extender either use a suction cup or a noose system to hold onto the glans or just below the glans. Each screw system has a marking either on the rod or on the between the cylinders that holds the base of the extender and the device the holds onto the glans or the base of the glans.
If you see the marking on the rods that connects to the screws, or twisting knobs, the marking indicate the traction force in either grams or kilogram. Mostly in grams. What you want to do is use a kitchen scale, assemble together the extender fully, place the base of the extender on the scale, and gently press onto the top of the extender (the attachment to the glans or below the glans), and make a notation on how much weight is needed to compress the rod and cylinders together. This is is your traction force. Each mark, based on the strength of the internal springs, allows you to determine how much traction force is pushed against your penis in an ideal condition. The further the screw being turned to push the penis out (or the traction intensity), the harder the tissues are being placed under pressure for growth.
Hope that helps. If you're still confused, assemble the entire extender together, take a photo, and post it here. We'll help you by doodling the photo to give you more info.
If you see the marking on the rods that connects to the screws, or twisting knobs, the marking indicate the traction force in either grams or kilogram. Mostly in grams. What you want to do is use a kitchen scale, assemble together the extender fully, place the base of the extender on the scale, and gently press onto the top of the extender (the attachment to the glans or below the glans), and make a notation on how much weight is needed to compress the rod and cylinders together. This is is your traction force. Each mark, based on the strength of the internal springs, allows you to determine how much traction force is pushed against your penis in an ideal condition. The further the screw being turned to push the penis out (or the traction intensity), the harder the tissues are being placed under pressure for growth.
Hope that helps. If you're still confused, assemble the entire extender together, take a photo, and post it here. We'll help you by doodling the photo to give you more info.
Upvote
0
Oh ok also just checked unfortunately this one doesn't have any marking on it or any springs this is what I got http://amazon.ca/Pumped-Shots-America-Penis-Extender/dp/B07W12J1F7 as a beginner one never knew about the additional weight stats when extending also as a side not does the direction of the extend matter or mess with growth like I extending straight out or straight up or straight down which is most recommended ?
Upvote
0
- Joined
- Feb 8, 2024
- Messages
- 2,229
Yep. Similar screw type. Simply rig the scale by placing it against the wall, place the glans holding attachment against a speaker box or a few books, and screw it. the pressure against the heavy job and a wall give sure give you the traction weight with ease.
Upvote
0
Hey I was thinking about this right now for long hours right now got noose system but ordered a vac cup and will be doing the water trick compared to the noose will vac cup cut off blood flow like the noose does ? Or is there a certain amount of time should be wearing vac cup and taking it off ? Or it should be fine wearing for long periods of time and not worrying about the blood flow?
Upvote
0
- Joined
- Feb 8, 2024
- Messages
- 2,229
While using vacuum cup, you don't have to remove the blood out of the glans. That's the one thing above the vacuum system over the noose system. Noose system, you cannot have blood in the glans or you will suffer. The vacuum system, you are encouraged to get blood into the vacuum cup to cycle blood through. The more blood you can get into the cup, the tighter the vacuum seal.
It's all about the comforts. You may only be able to wear 2 hours at first, and keep going until you hit 10 hours. You can even wear it 24/7. But, do allow the penis to rest after 18 hours max. If you plan on using water inside the vacuum cup, try to use half of the time with water and half of the time with air. Too long of water wearing can strip too much of the natural oil and moisture developed by the body and cause your glans' skin to peel.
For the vaccum up, you don't have to worry about the blood not flowing out. You have to worry about getting more blood in to get the perfect seal.
Upvote
0
Ok perfect just thought I'd have to worry about blood being stuck there kind of like the noose and have to take it off too circulate blood every 30min or so also regarding weight you said 1200-1300g is the sweet spot would that be for the entirety of it or will I have to increase resistance at a certain point it is said to atleast 3% past bpfsl and increase weight or time
Upvote
0
- Joined
- Feb 8, 2024
- Messages
- 2,229
That will be all day, everyday. You will have to constantly adjust the tension as your penile shaft extend under tension. I lost count on how many times I have to adjust wearing an extender because the penile shaft keeps on elongating. A good thing, but also a pain.
Upvote
0
Alright just thought the body would adjust to that weight overtime and would have too increase but I will keep it at that weight level and as far as starting point where you suggest starting at 2-3%+ bpfsl or as soon as the tension hits that mark and keep adjusting as it loosens ?
Upvote
0
- Joined
- Feb 8, 2024
- Messages
- 2,229
Adjust the moment you see the loosen tissues is no longer than the 1200-1250g mark. But do build up your tolerance first. You may have to maintain an 800g to 900g to adjust your glans's sensitivity enough to go beyond 4 hours. If you are ready, go for broke at 1250g.
Upvote
0
Similar threads
