want to understand MOSRED

[Vastamoros18]

Hi brothers from another mother.
Been reading forum for about six months. Currently i'm using Bathmate since February on average 4-5 days a weak.

I also have Lengthmaster, but cant understand how to use it, so I'm sticking with Bathmate alone for girth.

Considering to buy MOSRED, but would like to know what practical advantages it can offer. I know there are a lot of information in here, but its scattered.

Will be grateful for any advice.

 

[DLD]

Here are the benefits

• Improve Erection Quality
• 
  Boost Testosterone
• 
  Reverse Male Infertility
• 
  Fat Loss
• 
  Hair Growth
• 
  Training and Performance
• 
  Bone Healing
• 
  Muscle Recovery
• 
  Joint Pain
• 
  Skin Health
• 
  Thyroid Function
• 
  Sleep Optimization
• 
  Deuterium Depletion
• 
  Brain Injuries
• 
  Inflammation
• 
  

 

[oldandlively]

Red light therapy is an all-benefit and no pharmaceutical side effects to enhance your internal cellular growths and repairs. Just like anything good, "Too much of a good thing can be a bad thing." Doses are required to be monitored and carefully administered. We are here to assist with that as well. MOS Red has a very specific time limit per day for usages, based on your needs. Remember, your penis is not the only body part that can benefit with the red light therapy.

For those who don't know about red light therapy, advance medical sciences are now using red light therapy to combat cancer cells without surgery, deadly immuno-suppressive chemicals, and fastest recovery time. It's so exciting to see how red light therapy is leading new fields of medical application and not just the small spectrum of what have been discovered.

 

[oldandlively]

I also have Lengthmaster, but cant understand how to use it, so I'm sticking with Bathmate alone for girth.

You have an ultimate tool to use at your finger tips, but with a slight learning curve to get used to it. Our brothers compiled video instruction for usage:

https://mattersofsize.com/media/albums/length-work.99/

Brother SIM and many other brothers are providing detailed instructions on effective wrapping in dealing with various situations. Make sure to search for "Length Master Wrapping" and you'll find may issues being resolved little by little. Let us know what you need help with.

 

[Vastamoros18]

Red light therapy is an all-benefit and no pharmaceutical side effects to enhance your internal cellular growths and repairs. Just like anything good, "Too much of a good thing can be a bad thing." Doses are required to be monitored and carefully administered. We are here to assist with that as well. MOS Red has a very specific time limit per day for usages, based on your needs. Remember, your penis is not the only body part that can benefit with the red light therapy.

For those who don't know about red light therapy, advance medical sciences are now using red light therapy to combat cancer cells without surgery, deadly immuno-suppressive chemicals, and fastest recovery time. It's so exciting to see how red light therapy is leading new fields of medical application and not just the small spectrum of what have been discovered.

I appreciate your input.

By using Bathmate, i have gained a significant discolouration. And I want to get rid of it.
Could you, or someone else, please clarify if using MOSRED will help to reduce it while I continue to pump?

If yes, do I have to use MOSRED before or after pump session or both?

 

[oldandlively]

I appreciate your input.

By using Bathmate, i have gained a significant discolouration. And I want to get rid of it.
Could you, or someone else, please clarify if using MOSRED will help to reduce it while I continue to pump?

If yes, do I have to use MOSRED before or after pump session or both?

MOS Red alone won't help. The discoloration is due to the amount of broken blood cells' and plasma components deposited in the fascias. You have to use a different approach. Look at these discussions for ideas.

https://mattersofsize.com/threads/what-is-discoloration-to-the-penis.53429/

https://mattersofsize.com/threads/discoloration-since-8-months-still-not-going-away.1831845/

https://mattersofsize.com/threads/discoloration-kit.64753/#post-1960786

Hyperpigmentation whiteners should be approached very carefully as our external body chemistry can change the nature of the whiteners because of heat, chemical reactions, and bodily responses to the chemicals.

 

[bemorethanbig]

I appreciate your input.

By using Bathmate, i have gained a significant discolouration. And I want to get rid of it.
Could you, or someone else, please clarify if using MOSRED will help to reduce it while I continue to pump?

If yes, do I have to use MOSRED before or after pump session or both?

I have has success with RED Light and discoloration. I use Red light as my warm up, so I do manual stretches for 10min before pumping when it's pump day, normally I do 30 min manual with Red light and then 5 x 5 x 3.

I can't find it now, but my posts on Red Light break down the benefits by a lot.

 

[Vastamoros18]

MOS Red alone won't help. The discoloration is due to the amount of broken blood cells' and plasma components deposited in the fascias. You have to use a different approach. Look at these discussions for ideas.

https://mattersofsize.com/threads/what-is-discoloration-to-the-penis.53429/

https://mattersofsize.com/threads/discoloration-since-8-months-still-not-going-away.1831845/

https://mattersofsize.com/threads/discoloration-kit.64753/#post-1960786

Hyperpigmentation whiteners should be approached very carefully as our external body chemistry can change the nature of the whiteners because of heat, chemical reactions, and bodily responses to the chemicals.

Excellent. Thank you. Knew you will be the one who will give genuine answer.

I got the point regarding the pumping, MOSRED and discoloration.

And how MOSRED helps while using Lengthmaster? At some point I will definitely make a second attempt and try to start using it.

 

[Vastamoros18]

To get an answers faster before I checkout my cart, will ask one more question. Want to understand the size of cylinder to choose for Mityvac.

My erect girth measurements:

• close to base - 15.3-15.7 cm / 6.02-6.18 inch
• in the middle - 13.6-14.9 cm / 5.35-5.86 inch

I have Bathmate HydroXtreme7 and when pumping i'm filling it full 2/3 of the length of my shaft. So, the lower side of cylinder is completely filled. And most of the pressure I achieve with Bathmate it goes to the upper side (most likely thats why discoloration is only on the upper part of the penis).

I want to feel free in the cylinder so there is space for expansion and also pressure is more balanced.

I measured diameter of HydroXtreme7 at the opening and its 6,5 cm / 2.56 inch.

I should order a 2.25-inch cylinder if I follow the sizing instructions on the Mityvac product page on Mos Shop. But its even smaller than my existing HydroXtreme7.

So, what should I do?

 

[oldandlively]

To get an answers faster before I checkout my cart, will ask one more question. Want to understand the size of cylinder to choose for Mityvac.

My erect girth measurements:

• close to base - 15.3-15.7 cm / 6.02-6.18 inch
• in the middle - 13.6-14.9 cm / 5.35-5.86 inch

I have Bathmate HydroXtreme7 and when pumping i'm filling it full 2/3 of the length of my shaft. So, the lower side of cylinder is completely filled. And most of the pressure I achieve with Bathmate it goes to the upper side (most likely thats why discoloration is only on the upper part of the penis).

Just want to get clarification, you filled 2/3 of the BathMate cylinder's diameter/girth and not length? Length is filling from the base to the very tip of the cylinder.

As for the BathMate upper pressure, do you have the gauge to monitor or is this by feel?

I want to feel free in the cylinder so there is space for expansion and also pressure is more balanced.

I measured diameter of HydroXtreme7 at the opening and its 6,5 cm / 2.56 inch.

I should order a 2.25-inch cylinder if I follow the sizing instructions on the Mityvac product page on MoS Shop. But its even smaller than my existing HydroXtreme7.

So, what should I do?

So, if you're getting a 2.25in cylinder, the internal diameter for expansion should be around 2.15in (giving a reduction of internal diameter due to the cylinder's thickness just in case). Your your entire potential girth gain from this 2.25in cylinder will be 6.75in or 17.15cm. Most young pussies you plan on hammering will not reach this level for a long while, unless you're chasing after very seasoned pussies. You'll have plenty of growth and comfortable time in the cyclinder. I have one myself.

Remember, you want a girth increase with uniform penis. I have a 1.75in, 2in, 2.25in, and the last one is the 2.6in HydroXtreme Bathmate. See the gradual growth with uniform penile shaft I'm chasing after?

 

[Vastamoros18]

Just want to get clarification, you filled 2/3 of the BathMate cylinder's diameter/girth and not length? Length is filling from the base to the very tip of the cylinder.

I'm talking only about girth. In about 1.5 month I achieved, that cylinder in the girth was full.

As for the BathMate upper pressure, do you have the gauge to monitor or is this by feel?

Except length in the cylinder, i dont monitor anything else. I dont have gauge. Thats one of the reasons i want to order mityvac.

So, if you're getting a 2.25in cylinder, the internal diameter for expansion should be around 2.15in (giving a reduction of internal diameter due to the cylinder's thickness just in case). Your your entire potential girth gain from this 2.25in cylinder will be 6.75in or 17.15cm. Most young pussies you plan on hammering will not reach this level for a long while, unless you're chasing after very seasoned pussies. You'll have plenty of growth and comfortable time in the cyclinder. I have one myself.

My concern is, that I want (need) larger diameter cylinder than my existing HydroXtreme7 which at the opening is 2.56 inch. If I purchase 2.25in Mityvac, than basically i'm buying smaller size. Or I dont understand something.

Remember, you want a girth increase with uniform penis. I have a 1.75in, 2in, 2.25in, and the last one is the 2.6in HydroXtreme Bathmate. See the gradual growth with uniform penile shaft I'm chasing after?

What is your current girth if I may ask and which cylinder size you are using right now?



Thank you for your help!

 

[oldandlively]

I'm talking only about girth. In about 1.5 month I achieved, that cylinder in the girth was full.

Got it. Your potential gain for girth already maxed out the HydroXtreme 7. It just means your potential to gain maxed out at 2.6in of possible girth in there. However, think about the cylidner design. The cylinder for Bathmate is angular, smaller head and larger base. You don't want that. You want uniform across the board from the bottom to the top. If your penis uses a 2.25in cylinder, that's a massive penis to deal with by a lot of ladies, from the tip down to the base. My suggestion is to get the 2.25in diameter cylinder, and pump until you have a uniform penis all the way to the very top. When you cannot pump any more after 2 or 3 sets, get a 2.5in cylinder. Make sure the 2.5in cylinder is 10in tall, or even 11in tall. Just in case you want grow longer as well. Don't limit yourself to just one size cylinder. If you want comfortable growth all the way up to 20cm (7.85in) in girth, good grief, that is one monsterous size penis for any female. Once again, you'll have plenty of comfortable space around the penis, but your penis won't be uniform from the bottom to the top.

Except length in the cylinder, i dont monitor anything else. I dont have gauge. Thats one of the reasons i want to order mityvac.

Good to hear you want to monitor the pressure. Never ever pump without knowing the pressure. The "feels" is just pure dangerous method of killing your penis.

My concern is, that I want (need) larger diameter cylinder than my existing HydroXtreme7 which at the opening is 2.56 inch. If I purchase 2.25in Mityvac, than basically i'm buying smaller size. Or I dont understand something.

2.25in diameter is around 2.15in diameter in reality. When your base of penis start to fill out and presses against the cylinder, the expansion starts to go up to the glans. The penis start to fill up at the middle of the shaft, and then the glans.

When you fill out, it's not your internal that's filling out. It may only be your skin layers (fascias) that filled with fluid that expands. This is a donut effects. You don't want that. You want that internal expansion to be the real expansion. This is your true growth. However, those who are young, the internal tissues do expand without fluid retention. This is a blessing. This is when you want to have both 2.25in and 2.5in cylinders handy.

What is your current girth if I may ask and which cylinder size you are using right now?

My current girth is 15.6cm (6.15in) right now. When I pump, I use the 2in cylinder for my first 2 sets, and that makes my entire penis fills the cylinder to the wall. I then switch over to my 2.25in cylinder for my last sets. It keeps my penis uniform in growth. If I have to go larger, I do have a generic 2.5in cylinder from many months ago to use. But my wife freaks out the moment I pull it out to pump. I tried a few times, and she could barely fit my glans into her vagina without groaning in pain.

 

[DLD]

Got it. Your potential gain for girth already maxed out the HydroXtreme 7. It just means your potential to gain maxed out at 2.6in of possible girth in there. However, think about the cylidner design. The cylinder for Bathmate is angular, smaller head and larger base. You don't want that. You want uniform across the board from the bottom to the top. If your penis uses a 2.25in cylinder, that's a massive penis to deal with by a lot of ladies, from the tip down to the base. My suggestion is to get the 2.25in diameter cylinder, and pump until you have a uniform penis all the way to the very top. When you cannot pump any more after 2 or 3 sets, get a 2.5in cylinder. Make sure the 2.5in cylinder is 10in tall, or even 11in tall. Just in case you want grow longer as well. Don't limit yourself to just one size cylinder. If you want comfortable growth all the way up to 20cm (7.85in) in girth, good grief, that is one monsterous size penis for any female. Once again, you'll have plenty of comfortable space around the penis, but your penis won't be uniform from the bottom to the top.


Good to hear you want to monitor the pressure. Never ever pump without knowing the pressure. The "feels" is just pure dangerous method of killing your penis.


2.25in diameter is around 2.15in diameter in reality. When your base of penis start to fill out and presses against the cylinder, the expansion starts to go up to the glans. The penis start to fill up at the middle of the shaft, and then the glans.

When you fill out, it's not your internal that's filling out. It may only be your skin layers (fascias) that filled with fluid that expands. This is a donut effects. You don't want that. You want that internal expansion to be the real expansion. This is your true growth. However, those who are young, the internal tissues do expand without fluid retention. This is a blessing. This is when you want to have both 2.25in and 2.5in cylinders handy.


My current girth is 15.6cm (6.15in) right now. When I pump, I use the 2in cylinder for my first 2 sets, and that makes my entire penis fills the cylinder to the wall. I then switch over to my 2.25in cylinder for my last sets. It keeps my penis uniform in growth. If I have to go larger, I do have a generic 2.5in cylinder from many months ago to use. But my wife freaks out the moment I pull it out to pump. I tried a few times, and she could barely fit my glans into her vagina without groaning in pain.

Thanks my brother. You are truly incredible in helping while I recover

 

[Vastamoros18]

Huge thanks for the input.

Now I know what to do with cylinder size.

2.25in diameter is around 2.15in diameter in reality. When your base of penis start to fill out and presses against the cylinder, the expansion starts to go up to the glans. The penis start to fill up at the middle of the shaft, and then the glans.

Yeap. Expansion goes up through the shaft and thats the reason why I have now two color penis. Black or dark violet at the top of the shaft, and at the base, where the pressure inside of the pump is smaller because I have filled it up, it is natural colour.

I just need to decide whether or not to buy MOSRED. My primary objective in using it was to eliminate the discolouration I mentioned above. Wife is not fond of it at all.

My current girth is 15.6cm (6.15in) right now.

(flex) Just a question out of curiosity. Where do you measure these 15.6cm - middle, base..?
And from a girth perspective, where did you start? How long did it take to accomplish that?

 

[oldandlively]

Yeap. Expansion goes up through the shaft and thats the reason why I have now two color penis. Black or dark violet at the top of the shaft, and at the base, where the pressure inside of the pump is smaller because I have filled it up, it is natural colour.

Way too high on pressure and too long on pump pressure time. Time to back up. Way way back and be safe brother.

I just need to decide whether or not to buy MOSRED. My primary objective in using it was to eliminate the discolouration I mentioned above. Wife is not fond of it at all.

Some brothers have successes on reducing the early stages of brusing and discoloration. For discoloration that has been there for too long, it may not be. However, nothing venture, nothing again.

(flex) Just a question out of curiosity. Where do you measure these 15.6cm - middle, base..?
And from a girth perspective, where did you start? How long did it take to accomplish that?

15.6cm from base to the base of glans. My glans corona (the rim) is 16.3cm. My wife likes the wide rim to stimulate her from the labia, past the O-spot, and rub the A-spot before hitting the back of her vaginal canal. I like the feeling of the corona rubbing, causing my penis to be more stimulated during each stroke.

For some brothers, they like their base to be the largest to hit the clitoris and labia. However, where you truly want to measure is the middle of the shaft, and if you like constant stimulation during movement, you want to measure right below the base of the glans. The highest stimulation during movement per stroke starts at the corona or the base of the glans, which ever is bigger.

When I started out back in 2001, I was around 4.75in in length and around 3.75in or probably 3.95in. I lost my old photos to be precise. Back then, we all experimented with PE and stumbled all over the place. In about a year, I managed to go from 4.75in length up to 6.25in length. And around 1.5 years or so, I was able to cement both my length at 6.15 in or so and girth at 4.75in. Back then, we didn't even know what cementing was. This coined term didn't come in until 2010 when our knowledge was more rounded. I kept my light maintenance to by doing slow squash jelq and newbie routines once every week or so and my girth managed to increase from 4.75in to 4.95in. Length droped and rised based on what I did with my girth because my wife wanted to have large girth sizes at time up to 5.5in by doing light pumping with SSJ.

Now, if I pump before having sex with her, my girth can be as big as 6.6in. If I combine both length and girth works before having sex, my length can be as long as 8.2in and girth as beefy as 6.5in. I not only bottom her out, but also stretched her out, making her toes curl and legs shaken within 5 minutes. It doesn't take long to achieve this brother.

 

[DLD]

Way too high on pressure and too long on pump pressure time. Time to back up. Way way back and be safe brother.


Some brothers have successes on reducing the early stages of brusing and discoloration. For discoloration that has been there for too long, it may not be. However, nothing venture, nothing again.


15.6cm from base to the base of glans. My glans corona (the rim) is 16.3cm. My wife likes the wide rim to stimulate her from the labia, past the O-spot, and rub the A-spot before hitting the back of her vaginal canal. I like the feeling of the corona rubbing, causing my penis to be more stimulated during each stroke.

For some brothers, they like their base to be the largest to hit the clitoris and labia. However, where you truly want to measure is the middle of the shaft, and if you like constant stimulation during movement, you want to measure right below the base of the glans. The highest stimulation during movement per stroke starts at the corona or the base of the glans, which ever is bigger.

When I started out back in 2001, I was around 4.75in in length and around 3.75in or probably 3.95in. I lost my old photos to be precise. Back then, we all experimented with PE and stumbled all over the place. In about a year, I managed to go from 4.75in length up to 6.25in length. And around 1.5 years or so, I was able to cement both my length at 6.15 in or so and girth at 4.75in. Back then, we didn't even know what cementing was. This coined term didn't come in until 2010 when our knowledge was more rounded. I kept my light maintenance to by doing slow squash jelq and newbie routines once every week or so and my girth managed to increase from 4.75in to 4.95in. Length droped and rised based on what I did with my girth because my wife wanted to have large girth sizes at time up to 5.5in by doing light pumping with SSJ.

Now, if I pump before having sex with her, my girth can be as big as 6.6in. If I combine both length and girth works before having sex, my length can be as long as 8.2in and girth as beefy as 6.5in. I not only bottom her out, but also stretched her out, making her toes curl and legs shaken within 5 minutes. It doesn't take long to achieve this brother.

Sounds sexy

 

[Vastamoros18]

Way too high on pressure and too long on pump pressure time. Time to back up. Way way back and be safe brother.

Ok, thx. Lets see what Mityvac will say about it.

Some brothers have successes on reducing the early stages of brusing and discoloration. For discoloration that has been there for too long, it may not be. However, nothing venture, nothing again.

What about Hydrocortisone Ointment 1% ? Could it help with my discoloration while i continue to use pumps?


Thanks for your story. Good gains you got. and fast, yes. It seems like you both love having sex and fully indulge in it. Beautiful.

Now, if I pump before having sex with her, my girth can be as big as 6.6in. If I combine both length and girth works before having sex, my length can be as long as 8.2in and girth as beefy as 6.5in.

I do the opposite, I try not to pump right before sex, cause it ruins my erection strength.

 

[DLD]

Definitely pick up some hydrocortisone to apply daily to keep skin healthy

 

[Abdiel Bull Berg]

Got it. Your potential gain for girth already maxed out the HydroXtreme 7. It just means your potential to gain maxed out at 2.6in of possible girth in there. However, think about the cylidner design. The cylinder for Bathmate is angular, smaller head and larger base. You don't want that. You want uniform across the board from the bottom to the top. If your penis uses a 2.25in cylinder, that's a massive penis to deal with by a lot of ladies, from the tip down to the base. My suggestion is to get the 2.25in diameter cylinder, and pump until you have a uniform penis all the way to the very top. When you cannot pump any more after 2 or 3 sets, get a 2.5in cylinder. Make sure the 2.5in cylinder is 10in tall, or even 11in tall. Just in case you want grow longer as well. Don't limit yourself to just one size cylinder. If you want comfortable growth all the way up to 20cm (7.85in) in girth, good grief, that is one monsterous size penis for any female. Once again, you'll have plenty of comfortable space around the penis, but your penis won't be uniform from the bottom to the top.


Good to hear you want to monitor the pressure. Never ever pump without knowing the pressure. The "feels" is just pure dangerous method of killing your penis.


2.25in diameter is around 2.15in diameter in reality. When your base of penis start to fill out and presses against the cylinder, the expansion starts to go up to the glans. The penis start to fill up at the middle of the shaft, and then the glans.

When you fill out, it's not your internal that's filling out. It may only be your skin layers (fascias) that filled with fluid that expands. This is a donut effects. You don't want that. You want that internal expansion to be the real expansion. This is your true growth. However, those who are young, the internal tissues do expand without fluid retention. This is a blessing. This is when you want to have both 2.25in and 2.5in cylinders handy.


My current girth is 15.6cm (6.15in) right now. When I pump, I use the 2in cylinder for my first 2 sets, and that makes my entire penis fills the cylinder to the wall. I then switch over to my 2.25in cylinder for my last sets. It keeps my penis uniform in growth. If I have to go larger, I do have a generic 2.5in cylinder from many months ago to use. But my wife freaks out the moment I pull it out to pump. I tried a few times, and she could barely fit my glans into her vagina without groaning in pain.

Think I’ll buy another 2.25inch diameter tube that’s 12 inches long and test out your method of doing the 2 first sets with my 2 inch diameter and 9.125 inch length cylinder. And then switch to the bigger one for my last 2 sets.

Must say you’ve got quite the girth, may I ask what you started out with in both length and girth?

 

[oldandlively]

Think I’ll buy another 2.25inch diameter tube that’s 12 inches long and test out your method of doing the 2 first sets with my 2 inch diameter and 9.125 inch length cylinder. And then switch to the bigger one for my last 2 sets.

Must say you’ve got quite the girth, may I ask what you started out with in both length and girth?

Me? Large girth? If you're putting me side by side with the rest of our brothers, I"m like a snake compared to their pythons in the running.

Currently, my length is 7.25in and girth at 5.9in (from 6.2in) because I'm refocusing on length. Lost a bit of girth through diversion but increased in length instead. The diversion is 85% length and 15% girth. Why the odd number? Trying to maintain girth from dropping while focusing on length. It's a way to keep length and girth close to a 1:0.9 ratio when possible. I like to keep it a 1:1 ratio, but that's going to be impossible since I'll be stopping at 6.3in girth and going up to 9in length.

 

[Abdiel Bull Berg]

Me? Large girth? If you're putting me side by side with the rest of our brothers, I"m like a snake compared to their pythons in the running.

Currently, my length is 7.25in and girth at 5.9in (from 6.2in) because I'm refocusing on length. Lost a bit of girth through diversion but increased in length instead. The diversion is 85% length and 15% girth. Why the odd number? Trying to maintain girth from dropping while focusing on length. It's a way to keep length and girth close to a 1:0.9 ratio when possible. I like to keep it a 1:1 ratio, but that's going to be impossible since I'll be stopping at 6.3in girth and going up to 9in length.

Thank you for your response brother. Though must say that compared to the average girth you’re quite girthy after all.

Best of luck with your routine. I know I ain’t stopping until I reach 9x6, sure going to take some time.

 

[DLD]

Thank you for your response brother. Though must say that compared to the average girth you’re quite girthy after all.

Best of luck with your routine. I know I ain’t stopping until I reach 9x6, sure going to take some time.

The perfect size!

 

[Abdiel Bull Berg]

The perfect size!

I hope and believe so too, brother.

Just gotta keep on PE’ing until I get there.

 

[DLD]

I hope and believe so too, brother.

Just gotta keep on PE’ing until I get there.

That's it you gotta stop at nothing to get what you want. I wanted that size so much and proud to say I surpassed it and went beyond. Consistently is key

 

[Abdiel Bull Berg]

That's it you gotta stop at nothing to get what you want. I wanted that size so much and proud to say I surpassed it and went beyond. Consistently is key

You sure did Guru. You went above and beyond what everyone even thought was possible with PE. Keep on being you brother and I will do my very best to stay very consistent.

 

[DLD]

You sure did Guru. You went above and beyond what everyone even thought was possible with PE. Keep on being you brother and I will do my very best to stay very consistent.

Thank you my brother! I'm getting old but I will be here everyday until the Lord calls me th Heaven