LengthMaster How To Wrap For LengthMaster Penis Stretching To Fit Into Loose Foreskin

L

limpeh

Active member
The idea is to achieve the circumcised look without getting circumcision as I don't wanna loose a bunch of nerves. So I use a Sili Ring to retract my foreskin & hold it in around mid shaft (pulling the ring all the way back to base would result in foreskin moving freely again as if nothing holds it in place) so that I can apply my LengthMaster wrap on the upper shaft. But the frustrating part is, even that my goal is to stretch as much as my inner penis out more, I have to wrap at my base & apply the LengthMaster at the base. to do that I have to do 2nd round of wrapping, this time on my mid shaft, after using the Sili Ring to push & hold more foreskin towards the base, & this is a time consuming process, & it's hard to push all of my foreskin away to get a flat surface. if I don't get a flat surface, I'll be stretching the foldings of my foreskins, which isn't something I want. The goal is for the inner penis to come out & fit into the foreskin properly. another challenge that I face is, as I touch my dick or use the Sili Ring, I couldn't help but get erect a bit. I hate this cuz by the time it becomes flacid in the Length Master, I'm pretty sure there're folds on my foreskin instead of a flat surface. Any ideas? @squirt_inducer_man

Even with the Sili Ring, the foreskin still moves & push the ring higher up instead of retaining a fixed position. It's frustrating.
 
limpeh said:
The idea is to achieve the circumcised look without getting circumcision as I don't wanna loose a bunch of nerves. So I use a Sili Ring to retract my foreskin & hold it in around mid shaft (pulling the ring all the way back to base would result in foreskin moving freely again as if nothing holds it in place) so that I can apply my LengthMaster wrap on the upper shaft. But the frustrating part is, even that my goal is to stretch as much as my inner penis out more, I have to wrap at my base & apply the LengthMaster at the base. to do that I have to do 2nd round of wrapping, this time on my mid shaft, after using the Sili Ring to push & hold more foreskin towards the base, & this is a time consuming process, & it's hard to push all of my foreskin away to get a flat surface. if I don't get a flat surface, I'll be stretching the foldings of my foreskins, which isn't something I want. The goal is for the inner penis to come out & fit into the foreskin properly. another challenge that I face is, as I touch my dick or use the Sili Ring, I couldn't help but get erect a bit. I hate this cuz by the time it becomes flacid in the Length Master, I'm pretty sure there're folds on my foreskin instead of a flat surface. Any ideas? @squirt_inducer_man

Even with the Sili Ring, the foreskin still moves & push the ring higher up instead of retaining a fixed position. It's frustrating.
Click to expand...
Are you retracting the foreskin before putting on Siliring?
 
yea, finally have the time to do so. the 1st pic shows my flacid & retracted penis with a foreskin with lots of unreversible folds thanks to the slow squash jelq. it's pretty loose & can be stretched all the way back at the base as seen in the 2nd pic due to pumping. only issue is there's no way to hold that stretch permanently at base. if i tried to secure that with the siliring, the foreskin's gonna push the siliring back to midshaft once I let my hand go.

I tried so hard to wrap my midshaft (when in the state shown in 2nd pic) to be placed in the lengthmaster's chamber (with siliring & hand securing the foreskin), but noticed that as I stretch with the lengthmaster, it pulls the foreskin a little due to the forward motion, & it lengthens my foreskin temporary. I'm afraid it'll become permanent cuz with pumping, the left side of my foreskin has grew bigger thanks to a slight curve to the right when fully erect. if I place the lengthmaster at my base, it just pull my foreskin forward to cover my gland.

so I have no idea to approach this whole PE thing without circumcision. cuz of fear of foreskin lengthening, I never jelq. any ideas on how can I approach with the wrapping?
 

Attachments

  • 1.jpg
    1.jpg
    97.5 KB · Views: 23
  • 2.jpg
    2.jpg
    100 KB · Views: 23
Last edited:
If I understand correctly, you want to do expressive stretching with the length master by attaching it at the base. Whether you are cut or uncut I don't think it's necessary to try to retract your foreskin if you want to perform this exercise.

If you want to do expressive stretching with the length master, wrap the penis at the extreme base, do not wrap it at mid shaft. After wrapping, attach the length master on top of the wrap which is at the extreme base.

Now, once the length master is attached, bundle the penis one rotation. That one bundled rotation will prevent you from stretching your foreskin. Bundle it and stretch. Simple and easy.

You are still new to PE that's why you are getting erect everytime you try attaching your length master. Also, when the erection goes down, do not conclude that the erection must have brought some folds. Stretch once the erection goes down.

I hope this helps.
 
limpeh said:
yea, finally have the time to do so. the 1st pic shows my flacid & retracted penis with a foreskin with lots of unreversible folds thanks to the slow squash jelq. it's pretty loose & can be stretched all the way back at the base as seen in the 2nd pic due to pumping. only issue is there's no way to hold that stretch permanently at base. if i tried to secure that with the siliring, the foreskin's gonna push the siliring back to midshaft once I let my hand go.

I tried so hard to wrap my midshaft (when in the state shown in 2nd pic) to be placed in the lengthmaster's chamber (with siliring & hand securing the foreskin), but noticed that as I stretch with the lengthmaster, it pulls the foreskin a little due to the forward motion, & it lengthens my foreskin temporary. I'm afraid it'll become permanent cuz with pumping, the left side of my foreskin has grew bigger thanks to a slight curve to the right when fully erect. if I place the lengthmaster at my base, it just pull my foreskin forward to cover my gland.

so I have no idea to approach this whole PE thing without circumcision. cuz of fear of foreskin lengthening, I never jelq. any ideas on how can I approach with the wrapping?
Click to expand...

@limpeh, I have written something that I think can help you.

My wrapping technique should work for you.
🔗 Wrapping version 2, for the lengthmaster.

This is my foreskin right now with a short flaccid and without any kind of stretching beforehand:
IMG_20230601_123907.jpg
IMG_20230601_124202.jpg
As you see I have a lot of foreskin still. But it have become much easier to clamp down in the chamber of the LENGTHMASTER 3 as I have grew in length.

There is 2 theraband pieces in my wrap, to deal with exactly this problem (to much foreskin). The first THERABAND is for cover the outer part of the shaft, and the second piece is to cover near the base. I need both pieces to make it work, even when I'm not doing expressive stretches (when you clamp down at the basr). I'm clamping down behind the glans, and it's recommended to start here.

My foreskin have not become more as I have increased my length. It's important, that you force your foreskin to stay back. The PENIS WRAPPING TAPE. I also use 2 cut up Phallosan forte glans protector caps, to keep the foreskin back and the wrap tight.

Everything is in my video instructions. I really think this wrap that I'm using will work for you as well, since my penis looks similar to yours in the amount of foreskin we have.

If you pull back the foreskin when you stretch, your forskin will not grow out of proportion as your penis grows. The opposite is true, your foreskin will fit your penis better. As I have become longer my foreskin fits me better, and it's easier to wrap my penis. I can even un-wrap and re-wrap my penis fast every 5 minutes now. Even with this amount of forskin.

Here is a picure of my supplies:
IMG_20230601_124754.jpg
The first piece of THERABAND (right in picture) is on a roll for making it more easy to apply it to my penis. You want as little creases and wrinkles as possible in the theraband, even when you have a lot of foreskin wrinkled there under. Don't pulk that back immediately. This is hard to explain with text. I need to make a new video explaining this. When you apply the bandage. Keep it rolled up as you are winding it. This will make it easier to wind it on top of the THERABAND.

The dimensions of everything is in my video instructions. I have bought more THERABAND and I cut it up with a really sharp scissor. It's important that the scissor is sharp sincr you want clean edges, so the THERABAND do not rip.

I need these two pieces of THERABAND, to make my wrap work (always).
The PENIS WRAPPING TAPE is as important to my wrap.

With both the PENIS WRAPPING TAPE (I reuse a piece for a longer time) and the two cut up Phallosan forte glans protector sleeves, I'm able to keep my wrap tight.

As I add the first sleeve I pull the wrapping back so my glans are fully out, then when the sleeve are applied, it hold back my foreskin. Then I add the second sleeve. The sleeves are 35 millimeter long (~ 1.38 inches) long. I will believe that a little longer silisleeve (a soft one and a thin one) from MOS Shop will work as well. But when I started out the black, PENIS WRAPPING TAPE, was enough for this task of keeping the wrap tight. Wrap the black tape tight around the bandage, and keep the foreskin back as you do this.

You can pull the wrap backwards towards your "fat pad" as you do this. You can even do this in the first stage as you have applied the theraband. You can apply your THERABAND pieces and then whrn you wind the bandage you pull on the THERABAND backwards as you apply the bandage piece. In this way it's easier to create the wrap.

You don't need to have the glans fully out (but out as much as possible), when ypu apply the THERABAND pieces (this is the reason it's two of them). You make this happen when you apply the bandage and when you wind the PENIS WRAPPING TAPE on top of the bandage. The small sleeve on top will make this easier. But it's important that the sleeve isn't to thick. You want as little of material in your wrap as possible so the chamber will grab the inner tissue of your penis.This is the reason you also wamt your foreskin pulled back as much as possible. The glans should be fully out when you have clamped down all the way.

The important thing is to keep the wrap tight.

Look at my clamp down video as well:
🔗 Clamping down to the chamber in the LENGTHMASTER 3, top view.

I make sure I compress my clans during the entirety of the clamp down in the chamber. In this way I can both make sure that there is as little of blood as possible in glans (will make the stretch nore comfortable, and reduce pressure on the glans).

Also with a firm grip on my glans I can pull my penis forward as well. Try to attach your penis near the base, to get the proper clamp down point.

The clamp down point after doing this method, when I do this, is behind my glans. I can clamp down at my base now. But you should not do this as new to stretching with LENGTHMASTER .

As I have clamped down a bit, I pull my penis forward and push myself into the LENGTHMASTER 3. In this way I force as much of the foreskin back with the help of the chamber. As I continue to clamp down some skin from my ball-sack will get stuck in the chamber. That's why I use this piece of bandage around my ball-sack. That is, to keep the skin from my ball-sack out of the chamber.

IMG_20230601_133204.jpg

Even with this tied around my ball-sack there will be some skin that get stuck in the chamber (skin from the ball-sack). When you have not clamped down all the way, you can carefully pull out the skin that is stuck. But don't do this immediately at the start. Remember your goal is to keep as much foreskin on your shaft pulled back as possible.

The only way for me to clamp down at the extreme base, is to have one of the sleeve's, as near my base as possible. You should not do expressive stretches (when you clamp down at the base) when you start out stretching with the lengthmaster. You should attach the lengthmaster behind your glans at first.

I hope this information helps you. If you need more support regarding this I'm willing to help you personally. Your problem is exactly what I struggle with when I started out using the lengthmaster. There was no video guide of the wrap back then, there where wrapping videos but not any wrapping videos that I could use for my specific problem with my "sea of forskin"

I personally struggled a lot with wrapping for the lengthmaster in the beginning. This is the reson I have created video guides about this. It's easier for me now to wrap. But I struggled a lot in the beginning. In my wrapping video it looks really easy for me, but some days even I struggle to get the wrap right.

You are not alone with this problem.
Just write if you need more support.
Hope this helps you.

Kind regards @squirt_inducer_man
 
Last edited:
huge-girth said:
If I understand correctly, you want to do expressive stretching with the length master by attaching it at the base. Whether you are cut or uncut I don't think it's necessary to try to retract your foreskin if you want to perform this exercise.

If you want to do expressive stretching with the length master, wrap the penis at the extreme base, do not wrap it at mid shaft. After wrapping, attach the length master on top of the wrap which is at the extreme base.

Now, once the length master is attached, bundle the penis one rotation. That one bundled rotation will prevent you from stretching your foreskin. Bundle it and stretch. Simple and easy.

You are still new to PE that's why you are getting erect everytime you try attaching your length master. Also, when the erection goes down, do not conclude that the erection must have brought some folds. Stretch once the erection goes down.

I hope this helps.
Click to expand...
roger that. what do you mean by bundle?
 
squirt_inducer_man said:
@limpeh, I have written something that I think can help you.

My wrapping technique should work for you.
🔗 Wrapping version 2, for the lengthmaster.

This is my foreskin right now with a short flaccid and without any kind of stretching beforehand:
View attachment 1833164
View attachment 1833165
As you see I have a lot of foreskin still. But it have become much easier to clamp down in the chamber of the LENGTHMASTER 3 as I have grew in length.

There is 2 theraband pieces in my wrap, to deal with exactly this problem (to much foreskin). The first THERABAND is for cover the outer part of the shaft, and the second piece is to cover near the base. I need both pieces to make it work, even when I'm not doing expressive stretches (when you clamp down at the basr). I'm clamping down behind the glans, and it's recommended to start here.

My foreskin have not become more as I have increased my length. It's important, that you force your foreskin to stay back. The PENIS WRAPPING TAPE. I also use 2 cut up Phallosan forte glans protector caps, to keep the foreskin back and the wrap tight.

Everything is in my video instructions. I really think this wrap that I'm using will work for you as well, since my penis looks similar to yours in the amount of foreskin we have.

If you pull back the foreskin when you stretch, your forskin will not grow out of proportion as your penis grows. The opposite is true, your foreskin will fit your penis better. As I have become longer my foreskin fits me better, and it's easier to wrap my penis. I can even un-wrap and re-wrap my penis fast every 5 minutes now. Even with this amount of forskin.

Here is a picure of my supplies:
View attachment 1833166
The first piece of THERABAND (right in picture) is on a roll for making it more easy to apply it to my penis. You want as little creases and wrinkles as possible in the theraband, even when you have a lot of foreskin wrinkled there under. Don't pulk that back immediately. This is hard to explain with text. I need to make a new video explaining this. When you apply the bandage. Keep it rolled up as you are winding it. This will make it easier to wind it on top of the THERABAND.

The dimensions of everything is in my video instructions. I have bought more THERABAND and I cut it up with a really sharp scissor. It's important that the scissor is sharp sincr you want clean edges, so the THERABAND do not rip.

I need these two pieces of THERABAND, to make my wrap work (always).
The PENIS WRAPPING TAPE is as important to my wrap.

With both the PENIS WRAPPING TAPE (I reuse a piece for a longer time) and the two cut up Phallosan forte glans protector sleeves, I'm able to keep my wrap tight.

As I add the first sleeve I pull the wrapping back so my glans are fully out, then when the sleeve are applied, it hold back my foreskin. Then I add the second sleeve. The sleeves are 35 millimeter long (~ 1.38 inches) long. I will believe that a little longer silisleeve (a soft one and a thin one) from MOS Shop will work as well. But when I started out the black, PENIS WRAPPING TAPE, was enough for this task of keeping the wrap tight. Wrap the black tape tight around the bandage, and keep the foreskin back as you do this.

You can pull the wrap backwards towards your "fat pad" as you do this. You can even do this in the first stage as you have applied the theraband. You can apply your THERABAND pieces and then whrn you wind the bandage you pull on the THERABAND backwards as you apply the bandage piece. In this way it's easier to create the wrap.

You don't need to have the glans fully out (but out as much as possible), when ypu apply the THERABAND pieces (this is the reason it's two of them). You make this happen when you apply the bandage and when you wind the PENIS WRAPPING TAPE on top of the bandage. The small sleeve on top will make this easier. But it's important that the sleeve isn't to thick. You want as little of material in your wrap as possible so the chamber will grab the inner tissue of your penis.This is the reason you also wamt your foreskin pulled back as much as possible. The glans should be fully out when you have clamped down all the way.

The important thing is to keep the wrap tight.

Look at my clamp down video as well:
🔗 Clamping down to the chamber in the LENGTHMASTER 3, top view.

I make sure I compress my clans during the entirety of the clamp down in the chamber. In this way I can both make sure that there is as little of blood as possible in glans (will make the stretch nore comfortable, and reduce pressure on the glans).

Also with a firm grip on my glans I can pull my penis forward as well. Try to attach your penis near the base, to get the proper clamp down point.

The clamp down point after doing this method, when I do this, is behind my glans. I can clamp down at my base now. But you should not do this as new to stretching with LENGTHMASTER .

As I have clamped down a bit, I pull my penis forward and push myself into the LENGTHMASTER 3. In this way I force as much of the foreskin back with the help of the chamber. As I continue to clamp down some skin from my ball-sack will get stuck in the chamber. That's why I use this piece of bandage around my ball-sack. That is, to keep the skin from my ball-sack out of the chamber.

View attachment 1833167

Even with this tied around my ball-sack there will be some skin that get stuck in the chamber (skin from the ball-sack). When you have not clamped down all the way, you can carefully pull out the skin that is stuck. But don't do this immediately at the start. Remember your goal is to keep as much foreskin on your shaft pulled back as possible.

The only way for me to clamp down at the extreme base, is to have one of the sleeve's, as near my base as possible. You should not do expressive stretches (when you clamp down at the base) when you start out stretching with the lengthmaster. You should attach the lengthmaster behind your glans at first.

I hope this information helps you. If you need more support regarding this I'm willing to help you personally. Your problem is exactly what I struggle with when I started out using the lengthmaster. There was no video guide of the wrap back then, there where wrapping videos but not any wrapping videos that I could use for my specific problem with my "sea of forskin"

I personally struggled a lot with wrapping for the lengthmaster in the beginning. This is the reson I have created video guides about this. It's easier for me now to wrap. But I struggled a lot in the beginning. In my wrapping video it looks really easy for me, but some days even I struggle to get the wrap right.

You are not alone with this problem.
Just write if you need more support.
Hope this helps you.

Kind regards @squirt_inducer_man
Click to expand...
much thanks for your help man. i'm still in the process of learning & understanding what you've jut typed, but i found the idea of wrapping the retracted foreskin at the base to be super helpful. that allows me to wrap my mid shaft smoothly. once i'm done with that, i removed the wrap at the base to lose erection before using the lengthmaster.
 
limpeh said:
much thanks for your help man. i'm still in the process of learning & understanding what you've jut typed, but i found the idea of wrapping the retracted foreskin at the base to be super helpful. that allows me to wrap my mid shaft smoothly. once i'm done with that, i removed the wrap at the base to lose erection before using the lengthmaster.
Click to expand...
You're welcome. Okey. I hope it works out for you. The best thing would be if I could make a video about this.

But my setup is to tape my phone to my head, that's a little awkward. 😅
I need to find another way.

As you stretch more, your erections will not happen when you attach in the chamber.
 
thank you everyone, from the bottom of my heart for the support & love! after reading @squirt_inducer_man 's comment for a few times & trying on my end, seems like i got the hang of it. been stretching using the lengthmaster for a few days with only the black penis wrap. funny thing was, I think my length decreased from 14.5cm to 14cm (stopped pumping for a while), altho when I'm fully erect, there's a tiny bit of gap between my gland & my foreskin now (sometimes after a stretch with the lengthmaster & silistretcher, my foreskin got long temporary & can cover my gland, which is annoying LOL).

as for lengthmaster, my current stretching method is securing it behind my gland, get into a squatting position, pull the lengthmaster behind my ass, & press the lengthmaster a bit with my heels while my toes on the floor for 4-5 mins. I'm unsure if I should continue to do this daily since I start to feel more pain sooner when I stretch now, compared to the initial few days where it was more bearable. or maybe I was just watching John Wick, that's why it was more bearable compared to watching YT & other movies LOL. also, does stretching behind the gland stretching the frenulum too?
 
Last edited:
limpeh said:
that's good to know. I'll not have to worry bout this then. do you stretch daily too or have rest days for stretching?
Click to expand...
No worries about this. Your cock will transform nicely with the lengthmaster.

I do 3 days stretching and 1 day rest, and repeat. If I didn't have the MOS-RED, this would not work for me. Not with this intensity.
 
squirt_inducer_man said:
No worries about this. Your cock will transform nicely with the lengthmaster.

I do 3 days stretching and 1 day rest, and repeat. If I didn't have the MOS-RED, this would not work for me. Not with this intensity.
Click to expand...
I see. do you mean the infrared thigy? I wanted to stretch harder but was afraid of breaking my cock. a bit dicouraging that when I measure it, length has decreased, tho my stretching ability improved since the 1st few time I used the lengthmaster
 
limpeh said:
haha my goodness I only have a cheap phone without tripod & I'll need both hands for the lengthmaster haha. I'll try & see how to go bout this
Click to expand...
I use my phone for my videos. In my last wrapping video, I taped my phone to a standing foam-roller. Otherwise I have used coffee mugs to get my phone in position. You can do it.
 
alright, too painful to stretch without using bandage. I usually don't use bandage cuz they become loose after i lose my erection. looks like I gotta look into @squirt_inducer_man 's lengthmaster to see the mods he made. I noticed if I don't use any wraps, it's the easiest topull & hold my foreskin to clamp my penis in the chamber, but whenever I stretch & the back of my gland touches the edges of the chamber, it becomes painful. looks like if there's lengthmaster 4, there's room for improvements on the comfort of the chamber. other than that, it's hell of an awesome stretching tool.
 
Last edited:
limpeh said:
thank you everyone, from the bottom of my heart for the support & love! after reading @squirt_inducer_man 's comment for a few times & trying on my end, seems like i got the hang of it. been stretching using the lengthmaster for a few days with only the black penis wrap. funny thing was, I think my length decreased from 14.5cm to 14cm (stopped pumping for a while), altho when I'm fully erect, there's a tiny bit of gap between my gland & my foreskin now (sometimes after a stretch with the lengthmaster & silistretcher, my foreskin got long temporary & can cover my gland, which is annoying LOL).

as for lengthmaster, my current stretching method is securing it behind my gland, get into a squatting position, pull the lengthmaster behind my ass, & press the lengthmaster a bit with my heels while my toes on the floor for 4-5 mins. I'm unsure if I should continue to do this daily since I start to feel more pain sooner when I stretch now, compared to the initial few days where it was more bearable. or maybe I was just watching John Wick, that's why it was more bearable compared to watching YT & other movies LOL. also, does stretching behind the gland stretching the frenulum too?
Click to expand...

As a beginner, you should start off with the beginner routine. Have you watched the video?
 
limpeh said:
alright, too painful to stretch without using bandage. I usually don't use bandage cuz they become loose after i lose my erection. looks like I gotta look into @squirt_inducer_man 's lengthmaster to see the mods he made. I noticed if I don't use any wraps, it's the easiest topull & hold my foreskin to clamp my penis in the chamber, but whenever I stretch & the back of my gland touches the edges of the chamber, it becomes painful. looks like if there's lengthmaster 4, there's room for improvements on the comfort of the chamber. other than that, it's hell of an awesome stretching tool.
Click to expand...
@limpeh, Hello again brother.

You don't stretch with a bandage in your wrap, that sounds painful? Your penis should be in a completely flaccid state when you wrap it and clamp down in the chamber.
It's not so strange that you experience pain without a solid wrap around your penis.

The pinching is normal. I experienced this as well when I was new to LENGTHMASTER 3. You will get used to this "uncomfortable" feeling. You can try putting a piece of fabric on the bottom pad in the chamber (see attached picture). Also, it's not comfortable to make your penis bigger, it never is comfortable. Don't blame the lengthmaster, blame your wrap and inexperience with the lengthmaster 3.

I have no problems with the comfort as of now.
You need a solid and comfortable wrap to make it work. Without this it will be painful. Have you looked at my videos, regarding wrapping, attaching and detaching in the chamber?
The wrap should hold back your foreskin when you clamp down, not your hand. Make the best of what you have.
-----------------
*Edit: Sorry I know you have watched the videos. But I just didn't get the fact that you are not using any kind of bandage in your wrap. You need the bandage and black PENIS WRAPPING TAPE over it, to make the wrap tight, so that less foreskin is pinched. You want to remove the possibility that the foreskin is pinched at the outside of the hollowed out area for the penis (in the chamber).

I used only one piece of THERABAND in the beginning and just a bandage over it. I got pinched real bad in my foreskin (at the sides). It started to work for me when I incoperated two pieces of THERABAND and;
black PENIS WRAPPING TAPE (follow link).

I had this problem in the beginning as well. That's why I put so much energy into trying to help you. If you need me to make another video about this to explain it better, just say and I will create one. I create video instructions as they are needed.

This is the wrapping I'm using right now:
🔗 Wrapping for the LENGTHMASTER 3 (top view).

If you come up with a better method for wrapping then the one I'm using, please share that.
But I don't believe you can make the wrap work without bandage and making the wrap tight with black PENIS WRAPPING TAPE, and/or a sleeve over it. The PENIS WRAPPING TAPE and the sleeves I'm using, their purpose is to hold back the forskin and make the wrap tight.

Kind regards brother.
 

Attachments

  • IMG_20230605_110804.jpg
    IMG_20230605_110804.jpg
    1.1 MB · Views: 7
Last edited:
squirt_inducer_man said:
@limpeh, Hello again brother.

You don't stretch with a bandage in your wrap, that sounds painful? Your penis should be in a completely flaccid state when you wrap it and clamp down in the chamber.
It's not so strange that you experience pain without a solid wrap around your penis.

The pinching is normal. I experienced this as well when I was new to LENGTHMASTER 3. You will get used to this "uncomfortable" feeling. You can try putting a piece of fabric on the bottom pad in the chamber (see attached picture). Also, it's not comfortable to make your penis bigger, it never is comfortable. Don't blame the lengthmaster, blame your wrap and inexperience with the lengthmaster 3.

I have no problems with the comfort as of now.
You need a solid and comfortable wrap to make it work. Without this it will be painful. Have you looked at my videos, regarding wrapping, attaching and detaching in the chamber?
The wrap should hold back your foreskin when you clamp down, not your hand. Make the best of what you have.
-----------------
*Edit: Sorry I know you have watched the videos. But I just didn't get the fact that you are not using any kind of bandage in your wrap. You need the bandage and black PENIS WRAPPING TAPE over it, to make the wrap tight, so that less foreskin is pinched. You want to remove the possibility that the foreskin is pinched at the outside of the hollowed out area for the penis (in the chamber).

I used only one piece of THERABAND in the beginning and just a bandage over it. I got pinched real bad in my foreskin (at the sides). It started to work for me when I incoperated two pieces of THERABAND and;
black PENIS WRAPPING TAPE (follow link).

I had this problem in the beginning as well. That's why I put so much energy into trying to help you. If you need me to make another video about this to explain it better, just say and I will create one. I create video instructions as they are needed.

This is the wrapping I'm using right now:
🔗 Wrapping for the LENGTHMASTER 3 (top view).

If you come up with a better method for wrapping then the one I'm using, please share that.
But I don't believe you can make the wrap work without bandage and making the wrap tight with black PENIS WRAPPING TAPE, and/or a sleeve over it. The PENIS WRAPPING TAPE and the sleeves I'm using, their purpose is to hold back the forskin and make the wrap tight.

Kind regards brother.
Click to expand...
get you man. i usually only stretch with the black wrap but I can only stretch with that once a day comfortably. if I use the bandage, it either becomes too thick or loose cuz i tend to get erect a bit if i touch my penis & when I loose those erection, the black wraps can wrap around tight but not the bandage.
 
You must log in or register to reply here.
Back
Top