Extender Weight scale part name ?

[jonjon1]

Hello everyone I am wondering if anyone knows the part name of the Weight scale that is located on extenders such as Apex, hogstretcher, best extender anyone know the name of the part used to measure weight and where to find it ? Thank you

 

[oldandlively]

Hello everyone I am wondering if anyone knows the part name of the Weight scale that is located on extenders such as Apex, hogstretcher, best extender anyone know the name of the part used to measure weight and where to find it ? Thank you

Those are merely a pre-measured markers for the spring set. They are not really weight scale, but merely markers from traction tension. You can make your own using your kitchen scale, and do a permanent marker/edging on your extender if you don't have one. It's all based on the springs you have now. Springs do wear out after a few months of constant compression for 5 to 6 hours a day. So, the weight scale is useless. You have to go by feeling when the springs start to wear out.

Use a kitchen scale, slowly press down on the extender set, fully assembled to take proper measurement for the dual springs. Critical marker is 800g, 1000g, 1200g, and even 1300g. At 1300g, you only want to remain there for 2 hours max. You can go as high as 5000g for 30 to 40 minutes. This is great to initiate the stretches. The true tension you want to remain at is 1200g for as long as you can. A normal moderate wrap that still allows blood to flow into your penis is around 1000g of traction force using cotton Ace bandage. I believe it's called Uncle Jim's wrap in the MOS Shop.

 

[jonjon1]

Is there no possible way to get a similar part? Closest thing I found was the fish weight scale thing but works opposite and also possibly a bit more dangerous if slips and hook comes down lol

 

[jonjon1]

If you have source or links for springs and things needed too assemble would be greatly appreciated as I do not have springs on mine as we discussed in previous topic it is a screw type extender no springs or tension measurements

Those are merely a pre-measured markers for the spring set. They are not really weight scale, but merely markers from traction tension. You can make your own using your kitchen scale, and do a permanent marker/edging on your extender if you don't have one. It's all based on the springs you have now. Springs do wear out after a few months of constant compression for 5 to 6 hours a day. So, the weight scale is useless. You have to go by feeling when the springs start to wear out.

Use a kitchen scale, slowly press down on the extender set, fully assembled to take proper measurement for the dual springs. Critical marker is 800g, 1000g, 1200g, and even 1300g. At 1300g, you only want to remain there for 2 hours max. You can go as high as 5000g for 30 to 40 minutes. This is great to initiate the stretches. The true tension you want to remain at is 1200g for as long as you can. A normal moderate wrap that still allows blood to flow into your penis is around 1000g of traction force using cotton Ace bandage. I believe it's called Uncle Jim's wrap in the MOS Shop.

 

[oldandlively]

Is there no possible way to get a similar part? Closest thing I found was the fish weight scale thing but works opposite and also possibly a bit more dangerous if slips and hook comes down lol

Do you mean this?

https://shop.mattersofsize.com/products/siliscale-for-silistretcher?_pos=1&_sid=a183fe827&_ss=r

Or maybe and inline mini traction scale?


If you want to purchase a proprietary scale built into the traction device, you have to purchase the base parts. You can buy a generic base everywhere with the mini scale.

If you have source or links for springs and things needed too assemble would be greatly appreciated as I do not have springs on mine as we discussed in previous topic it is a screw type extender no springs or tension measurements

Screw type is limited by springless design. It's practically going by feel. Those who uses screw types normally use the fishing scale like what you plan on using, but simply to measure the weight to use for traction tension force. It's going by feeling. So, what's the method to detect the optimal stretches by feels using the screw type?

Relax your penis until you have total flaccid state. Grab and hold at the base of the glans, and pull until you feel a dull tug/pull along the entire penile shaft. This is an indicator of how strong or dense your internal tissues is.

Strap on your screw type, and keep on stretching until you feel that tug/pull along the entire penile shaft. This is your tension zone. If you don't feel that dull tug/pull feeling after 20 to 30 minutes, keep twisting the screws until you feel that dull feeling. You have to adjust it all day long. The 1200g tension is based on that dull tug/pull feeling.

 

[jonjon1]

Do you mean this?

https://shop.mattersofsize.com/products/siliscale-for-silistretcher?_pos=1&_sid=a183fe827&_ss=r

Or maybe and inline mini traction scale?
View attachment 1836402

If you want to purchase a proprietary scale built into the traction device, you have to purchase the base parts. You can buy a generic base everywhere with the mini scale.


Screw type is limited by springless design. It's practically going by feel. Those who uses screw types normally use the fishing scale like what you plan on using, but simply to measure the weight to use for traction tension force. It's going by feeling. So, what's the method to detect the optimal stretches by feels using the screw type?

Relax your penis until you have total flaccid state. Grab and hold at the base of the glans, and pull until you feel a dull tug/pull along the entire penile shaft. This is an indicator of how strong or dense your internal tissues is.

Strap on your screw type, and keep on stretching until you feel that tug/pull along the entire penile shaft. This is your tension zone. If you don't feel that dull tug/pull feeling after 20 to 30 minutes, keep twisting the screws until you feel that dull feeling. You have to adjust it all day long. The 1200g tension is based on that dull tug/pull feeling.

Yes the idea was since screw type would just purchase those 2 little tension scales and use them on it as it'll probably just slide on then the screws will tighten on it and give more accurate weight measurement but I couldn't find the part or part name as I doubt these sellers actually building them and just buying them from somewhere but I couldn't figure out the proper terminology for the part name was hoping would be purchasable online

 

[oldandlively]

Yes the idea was since screw type would just purchase those 2 little tension scales and use them on it as it'll probably just slide on then the screws will tighten on it and give more accurate weight measurement but I couldn't find the part or part name as I doubt these sellers actually building them and just buying them from somewhere but I couldn't figure out the proper terminology for the part name was hoping would be purchasable online

Unfortunately, you won't find it anywhere. The mini tension scales are built into the unit based on the manufacturer's design. I searched for friends for many years, even now, and gave up. Those who like to use extender after their routines purchased all metal types, especially the one from JES. The screw types, since they are more sturdy, they all go based on feel. We laughed about this all the time since they can't receive some of these medical devices in their regions due to restrictions. We all discussed in our own online channel about the base feels vs the proper tensions.

 

[jonjon1]

Unfortunately, you won't find it anywhere. The mini tension scales are built into the unit based on the manufacturer's design. I searched for friends for many years, even now, and gave up. Those who like to use extender after their routines purchased all metal types, especially the one from JES. The screw types, since they are more sturdy, they all go based on feel. We laughed about this all the time since they can't receive some of these medical devices in their regions due to restrictions. We all discussed in our own online channel about the base feels vs the proper tensions.

Damn that sucks guess gotta find another way as purchasing those is way out of my budget thought would be able to replicate for cheaper

 

[oldandlively]

Damn that sucks guess gotta find another way as purchasing those is way out of my budget thought would be able to replicate for cheaper

Unfortunately, there's no cheap method. Cheaper method is to purchase devices already have built in functions. Buying cheaper off-brand and off the shelf devices don't provide guarantee they will work past a certain period. Modding tend to be more expensive in the long run. This is why I have 3 drawers of modded tools going toward $4k. For me, it's fun to obtain tools and test them out, add new features, and report back to the brotherhood. For most, they are dead serious on obtain the proper tools for their PE journeys. Tools are not cheap, but good tools are essential. MOS provide the collection of tools you need after more than 2 decades of trials and errors.

The question is, which tools do you need that best tailor for you. Each brother has his own different needs based on the lifestyle and willingness to sacrifice for his own routines. There are way too many options for way too many variations.