- Joined
- Jan 27, 2024
- Messages
- 10
Found PE because I have curve that a previous gf commented on so owned it with the username Bentdiscipline.
Found some youtube videos about PE and tested a cheap Chinese copy of a penimaster. Eventually ordered a total man and used the leg belt. Gave myself multiple blisters/bruises before figuring out how to tape and that I really didn’t need so much (6 to 7lbs) force. Found some great (soft) sleeves meant for fingers from China that I use as the interface between the cup and member.
Order a replacement ring from phallosan (cheap) and made my own belt (around the waist) with some fabric band elastic materials and tiny carabiner clips. Was noticing fiction burns/soreness when the ring was around the base so now wear an oversized sleeve to protect it that I had (from total man). Ordered a vacuum pump with gauge and didn’t use it properly (wasn’t hard first) so end up with crazy surface swelling I find vaccum a hassle as I can’t do anything else at the same time, also have more starting thickness so only do it before a special evening.
Researched everything I could find on the science behind the process and made a prediction model to help me stay motivated. Found an app to track my traction sessions which is actually for measuring how much time you spend outdoors (1000 hours outside).
Had to tell my gf what I was going to be doing so she wasn’t surprised by marks and when I had to put on or take off the traction. So it’s been one year and I had to take time off many times due to injuries and I wasn’t as consistent as I should have been yet I was able to do 825hr. My results are exactly on scheduled as to the prediction model chart yet fractions of an inch are difficult to measure. I went from 6.3” to 7.1” now yet when I stopped for a couple months my length drop back down exactly as expected where the table suggested.
The real results of this is the ability I now have of hitting the back wall of my gf along with being able to stroke her cervix (being in deep and gliding side to side) both of which she absolutely loves.
My long term goal is to be bigger than any of her previous partners 7.5” and then be too much for her to fit which I calculated to be approximately 400 ml using zorbees a condom and a very patient gf. Below is my chart with my starting dimensions if you want me to make you one msg me with your stating (before you started PE) dimensions and I will send you a custom chart. It’s blocked off in 200hrs increments since that’s approximately how much traction I can do per month.
Found some youtube videos about PE and tested a cheap Chinese copy of a penimaster. Eventually ordered a total man and used the leg belt. Gave myself multiple blisters/bruises before figuring out how to tape and that I really didn’t need so much (6 to 7lbs) force. Found some great (soft) sleeves meant for fingers from China that I use as the interface between the cup and member.
Order a replacement ring from phallosan (cheap) and made my own belt (around the waist) with some fabric band elastic materials and tiny carabiner clips. Was noticing fiction burns/soreness when the ring was around the base so now wear an oversized sleeve to protect it that I had (from total man). Ordered a vacuum pump with gauge and didn’t use it properly (wasn’t hard first) so end up with crazy surface swelling I find vaccum a hassle as I can’t do anything else at the same time, also have more starting thickness so only do it before a special evening.
Researched everything I could find on the science behind the process and made a prediction model to help me stay motivated. Found an app to track my traction sessions which is actually for measuring how much time you spend outdoors (1000 hours outside).
Had to tell my gf what I was going to be doing so she wasn’t surprised by marks and when I had to put on or take off the traction. So it’s been one year and I had to take time off many times due to injuries and I wasn’t as consistent as I should have been yet I was able to do 825hr. My results are exactly on scheduled as to the prediction model chart yet fractions of an inch are difficult to measure. I went from 6.3” to 7.1” now yet when I stopped for a couple months my length drop back down exactly as expected where the table suggested.
The real results of this is the ability I now have of hitting the back wall of my gf along with being able to stroke her cervix (being in deep and gliding side to side) both of which she absolutely loves.
My long term goal is to be bigger than any of her previous partners 7.5” and then be too much for her to fit which I calculated to be approximately 400 ml using zorbees a condom and a very patient gf. Below is my chart with my starting dimensions if you want me to make you one msg me with your stating (before you started PE) dimensions and I will send you a custom chart. It’s blocked off in 200hrs increments since that’s approximately how much traction I can do per month.
Last edited:
