Girth work What size pump cylinder to order? How to accurately measure your penis for pump cylinder sizing!

huge-girth said:
Alright thanks for this. But the pump Tuffdong is using is giving him a base girth of 7.5 inches. Can the X40 do the same thing?
Click to expand...

Easily to calculate based on the diameter: https://www.omnicalculator.com/math/circumference
With 2.5" measured diameter cylinders you can go up to 7.8 inches girth.
So yes, you definitely are able to pump to 7.5" with the x40.

With gaiter: 7.8" girth possible
Without gaiter: 8.9" girth possible
 
Last edited:
F26 said:
Easily to calculate based from the diameter: https://www.omnicalculator.com/math/circumference
With 2.5" measured diameter cylinders you can go up to 7.8 inches girth.
So yes, you definitely can with the x40.

With gaiter: 7.8" girth possible
Without gaiter: 8.9" girth possible
Click to expand...

Thanks foe this F26, you did a great job for me.
giphy.gif
 
F26 said:
Easily to calculate based on the diameter: https://www.omnicalculator.com/math/circumference
With 2.5" measured diameter cylinders you can go up to 7.8 inches girth.
So yes, you definitely can with the x40 as I've posted 2.5"+ diameters above from the measured stats of the base from the BM x40.

With gaiter: 7.8" girth possible
Without gaiter: 8.9" girth possible
Click to expand...

However, the two people I know that has maxed out their X40 didn't get pass 7 inches base girth. I think the 2.5 cylinders will give 7 inches girth only and not 7.5 inches.
 
huge-girth said:
However, the two people I know that has maxed out their X40 didn't get pass 7 inches base girth. I think the 2.5 cylinders will give 7 inches girth only and not 7.5 inches.
Click to expand...
Bro... maths is maths (cwl)
You can't argue against proven science, but good luck ;)
Maybe they hadn't been on 100% EQ or whatever, but definitely not because of a too small cylinder diameter because you can't argue against maths and diameter - circumference calculating.
Another reason could be that they didn't pump correctly and it sucked in lots of skin, so instead of expanding only the base of the dick to 7.5", it expanded the base of the dick + lots of skin.
Next reason would be that your girth shrinks every few seconds when you leave the cylinder. So for measuring 7.5" after pulling your dick out of the cylinder, you maybe would need to have 8" girth pumped in the cylinder. Because in the cylinder a vacuum is sucking your dick, which isn't happening outside the cylinder.
 
Yep acromegaly was a Bathmate junkie lol
 
Alright I understand. Thanks for the info
 
arkailija said:
Yet you haven't found it? I remember from heart that @Big Schwanz Acht mentioned the X40 / 9 being 2.5" in diameter. Of course that measuring is "give or take" as the pump has the gaiter system.

I don't know why to consider the Hydromax though. If it's more readily available compared to the Mityvac, then sure. Basically pumping is about a decent, well-fitted cylinder and good suction. Easy enough to get brake bleeder kit to transform pretty much any air pump to a hydro ...
Click to expand...

exactly!
 
huge-girth said:
The answers are here on the forum
Click to expand...

exactly! Brothers please never send people to other sites when we have our own store here. If you think of product should be here please post it in the proper place and let us review it. If it turns out to be a good piece of equipment we will carry it. But do not send people out of this forum to other sites that will rip them off and take advantage of them.

We have worked very hard to make this brotherhood safe, secure and filled with the tools you have asked us to produce or carry. Please understand that MOS cost quite a bit of money to keep going so sending someone else where to buy equipment they could buy here actually hurts the forum.
 
how long do you guys pump for length using a slim cylinder and for how many days ? cheers
 
  • Like
Reactions: DLD
johnc83 said:
how long do you guys pump for length using a slim cylinder and for how many days ? cheers
Click to expand...

since we will not be dealing with water retention you can go much longer than what is suggested for girth. I would say 30 minutes at a time would be safe. But if you’re feeling pain be sure to stop and check out what’s happening. If things are looking copacetic you can probably go for even more time, just be careful
 
DLD said:
since we will not be dealing with water retention you can go much longer than what is suggested for girth. I would say 30 minutes at a time would be safe. But if you’re feeling pain be sure to stop and check out what’s happening. If things are looking copacetic you can probably go for even more time, just be careful
Click to expand...


im pumping for 20 minutes 3sets (1hour total) per day .... is that enough,i know you said 30mins but is that the total time per day or just the length of the set ? thanks again
 
  • Like
Reactions: DLD
johnc83 said:
im pumping for 20 minutes 3sets (1hour total) per day .... is that enough,i know you said 30mins but is that the total time per day or just the length of the set ? thanks again
Click to expand...

60 minutes is 60 minutes so you’re just fine. Is the tube narrow enough for you? Are you seeing any temporary elongation after a set?
 
DLD said:
60 minutes is 60 minutes so you’re just fine. Is the tube narrow enough for you? Are you seeing any temporary elongation after a set?
Click to expand...

i am yes .... these slim cylinders are great,i just needed a break from hanging everyday while still working on length
 
  • Like
Reactions: DLD
johnc83 said:
i am yes .... these slim cylinders are great,i just needed a break from hanging everyday while still working on length
Click to expand...

I’m so happy to hear this. What kind of elongation are you seeing after a session?
 
about a quarter of an inch immediately after, ive a 1.75 cylinder but im awaiting a 1.35 cylinder as i feel for my 4 1/2 inch errect girth its not quite slim enough,i also dont go into the pump fully erect ....... i measured myself last night bpel so i will see if i get any results after a couple of months pumping only
 
  • Like
Reactions: DLD
johnc83 said:
about a quarter of an inch immediately after, ive a 1.75 cylinder but im awaiting a 1.35 cylinder as i feel for my 4 1/2 inch errect girth its not quite slim enough,i also dont go into the pump fully erect ....... i measured myself last night bpel so i will see if i get any results after a couple of months pumping only
Click to expand...

Wow that’s good news! With the more narrow tube I guarantee you see twice that. Be sure those measurements are perfect so when you measure again you know exactly what yourgrowth is.
 
arkailija said:
Yet you haven't found it? I remember from heart that @Big Schwanz Acht mentioned the X40 / 9 being 2.5" in diameter. Of course that measuring is "give or take" as the pump has the gaiter system.

I don't know why to consider the Hydromax though. If it's more readily available compared to the Mityvac, then sure. Basically pumping is about a decent, well-fitted cylinder and good suction. Easy enough to get brake bleeder kit to transform pretty much any air pump to a hydro ...
Click to expand...
good point.
 
You must log in or register to reply here.

Similar threads

oldandlively
MityVac cylinder size selection based on objectives
Replies
8
Views
608
DLD
DLD
DLD
squirt_inducer_man
  • Sticky
Video Instructions 📹 Some information about valves and O-rings (MityVac related)
Replies
8
Views
741
squirt_inducer_man
squirt_inducer_man
squirt_inducer_man
oldandlively
MityVac comparison to Bathmate
Replies
16
Views
1K
DLD
DLD
DLD
squirt_inducer_man
Difference between 2.25" and 2.125"?
Replies
6
Views
746
DLD
DLD
DLD
H
Stage 2 penis pump Cylinders for length
Replies
5
Views
966
DLD
DLD
DLD
Back
Top Bottom