DLD

doublelongdaddy
Administrator
Super Moderator
Registered
Joined
Jun 3, 2003
Messages
124,451
We have now gotten a $4 discount on the parts to make the SizeGenetics with the TLC Tugger.
So if the items $35 (VLC) + $9 (Cone) + $7 (strap) + $8 (SG Clip), we could discount that by $4 for MOS guys for a package price of $55

So how do you get started you will need the following:

TLC Complete Package:
CLICK HERE TO ORDER VLC Package with Discount


AND YOU WILL NEED

SizeGenetics Extender:



NEW PROMOTIONAL ITEM!

An SG Clip that works for the VLC-X to the MOS Offer page at TLC Tugger.

Anyone who bought the VLC or VLC-X in August through October can order just the SG Clip and get shipping refunded.

Cheers,
-Ron


How to use the system:
If you have had any reservations about getting a Size Genetics ADS, this will end all fears.
This is my ultimate ADS extender that I have set up for myself using the best technology available today.

Ron makes 2 devices the TLC tugger for foreskin restoration and the VLC tugger for Penis Enlargement. The VLC works but hold the head of the shaft at the grip point at the top of the extender.
For this purpose, we are only using the VLC tugger.

The difference between the two is that the TLC has a hole in it that allows air in releasing the glands to the base and pulling the skin over. The VLC does not have the hole (vent less) so It does not let the head sink back to the base and gives you the shaft length that you want.

I can keep this on for hours on end with no loss in circulation or numbness since it not a noose that goes around the head but pull on it from the outside in. Up until now I have not been able to wear this thing longer than 15 minutes at a time, but now I can wear it for 4-6 hours at a time.

The regular noose method of the glans being cinched down will ultimately cause your reduced sensitivity, cold and numb glans and severe pain, thus you will have to take it off every 15-20 minutes. This new method I am using I can leave on for hours. So more time under traction, less time taking it off for breathers and to regain circulation means much more gains.

Since I am really gaining good ground with my ADS and the VLC tugger. I want you guys to be apart of this and get good results. This method is 100% proven, more time under traction=longer thicker penis that is permanent. What is even cooler is to gain length all you have to do is keep adding rods as your penis becomes accustom to the greater stretch, so in theory you can go as long as you want. I am going for DLD's length of 10.5''.
The first picture was taken back in April, The second was taken In August, see how much longer I am stretching now? About 4inches. And I can hold that for 6-8 hours a day.

The TLC tugger and VLC tugger are completely different one has a hole, the other does not. The amount of skin pulled over the Glans is about 1" with the VLC, with the TLC you get between 5-6 or more depending on how much restoration you have done. If you have any other questions send a message to Ron at TLCTuggerService@GMail.com

Here is a complete thread and video series about the VLC and Size Genetics Modification by Supra
http://www.mattersofsize.com/forum/...s-Extender-with-the-VLC-Tugger-w-Video-Series

<p><a href="http://www.mattersofsize.com/video/VLC-SG-FINAL.m4v"><img src="http://www.mattersofsize.com/images/VLC-SG.jpg" width="700" height="394" /></a></p>
 
Last edited by a moderator:
So this clip consists of a piece of metal wire? While this may help people who have an extender with holes for the nose fittings that doesn't really help with the strap only version I have.

I really was hoping for something more innovative like a piece which replaces the whole end-piece. Would have been nice also so you wouldn't have to order new rods when you don't really 'need them'...
 
Smartie;460727 said:
So this clip consists of a piece of metal wire? While this may help people who have an extender with holes for the nose fittings that doesn't really help with the strap only version I have.

I really was hoping for something more innovative like a piece which replaces the whole end-piece. Would have been nice also so you wouldn't have to order new rods when you don't really 'need them'...

You just have to drill a hole
 
I know that.
But I think I'll be able to come up with something better.

So is the discount only for the 'full package'?
 
Smartie;460727 said:
So this clip consists of a piece of metal wire? While this may help people who have an extender with holes for the nose fittings that doesn't really help with the strap only version I have.

I really was hoping for something more innovative like a piece which replaces the whole end-piece. Would have been nice also so you wouldn't have to order new rods when you don't really 'need them'...

He is in the process of making this a reality.
 
Im looking at this clip and trying to visualize exactly how it works. I guess it would be easy to figure out once u get it
 
Looks like this mod will be okay for those of us who are on the shorter side... any idea when the improved mod will be available?
 
Last edited:
idont99know;460956 said:
I'm also having difficulty, maybe someone could post a picture of the VLC and SG clip in action?

This page shows me wearing the VLC with the SG Clip hooked to the SG's yoke: VLC

The clip is poked up through one of the holes near the front, and its geometry just holds it there when the Tugger pulls at it. You could tape the stem of the SG clip to the SG with electrical or medical tape to make sure it doesn't get lost, because it is NOT attached to the SG if the Tugger isn't pulling on it.

-Ron
 
Last edited:
Smartie;460727 said:
So this clip consists of a piece of metal wire? While this may help people who have an extender with holes for the nose fittings that doesn't really help with the strap only version I have.

I really was hoping for something more innovative like a piece which replaces the whole end-piece. Would have been nice also so you wouldn't have to order new rods when you don't really 'need them'...

Casting a proper yoke would require injection molding tooling that can cost $20,000 or more. We're not at the volumes yet that warrant that investment. I may be able to hand-make something out of Alumilite for say $15 but it won't look all manly and sleek like Penis Enlargement guys are used to.

If you loan me your Yoke I'll rig something like the SG Clip for your brand.
-Ron
 
Last edited:
TLCTugger;460958 said:
Casting a proper yoke would require injection molding tooling that can cost $20,000 or more. We're not at the volumes yet that warrant that investment. I may be able to hand-make something out of Alumilite for say $15 but it won't look all manly and sleek like Penis Enlargement guys are used to.

If you loan me your Yoke I'll rig something like the SG Clip for your brand.
-Ron
What about all those rapid protyping services like shapeways? The individual parts would be more expensive but volume is irrelevant, I might be able to help you out with that if you are interested.

Leave me a note if you like.
 
TLCTugger;460958 said:
Casting a proper yoke would require injection molding tooling that can cost $20,000 or more. We're not at the volumes yet that warrant that investment. I may be able to hand-make something out of Alumilite for say $15 but it won't look all manly and sleek like Penis Enlargement guys are used to.

If you loan me your Yoke I'll rig something like the SG Clip for your brand.
-Ron


Welcome to the Forums RON! Great to have you onboard.
 
TLCTugger;461648 said:
As some guys have asked, YES I can make an SG Clip for the VLC-X version. I'll call it the SGX and I have it listed at the MOS Offer page: http://TLCTugger.com/MOS.

-Ron Low

I will also make a post in regards to your new promotion on the clip in a new thread. Thanks for working with us Ron.
 
I saw S&H will be automatically added at checkout, but when I add the VLC/SG kit to cart it only prompts a $55 charge. Does this include shipping then?
 
ck396;463436 said:
I saw S&H will be automatically added at checkout, but when I add the VLC/SG kit to cart it only prompts a $55 charge. Does this include shipping then?

Yup, that includes shipping
 
I just ordered this and they added $7.00 shipping for a total of $62.00, I wrote them an email and got one back and this is what it said .Hi,

The VLC package at the MOS site is at a discounted price and doesn't include free shipping. Sorry about that.

Regards,
Alice So was just wondering if this was a misunderstanding and if so what should I do DLD. Thanks,
 
The MOS discounted package price is $55, plus the $7 ship/fit charge will be added upon checkout.

-Ron
 
TLCTugger;463933 said:
The MOS discounted package price is $55, plus the $7 ship/fit charge will be added upon checkout.

-Ron

Thanks Ron for being available to us at MOS!
 
Back
Top Bottom