Joined
Mar 23, 2015
Messages
229
I can't use this thing safely above 6 pounds. Was wondering if anyone used this thing successfully with low weights and longer time?

Any advice?
 
deadwood187;675021 said:
I can't use this thing safely above 6 pounds. Was wondering if anyone used this thing successfully with low weights and longer time?

Any advice?

What is happening when you go to 6 pounds that is the issue?
 
He probably receives blisters. I don't understand why they call it a hanger if its gonna have that effects on you
 
I hang up to 13 lbs with the VH3 without any problems. I use water instead of tape and other materials though to prevent blistering or discoloration. Water works amazing. I hang 13lbs for up to an hour straight. I will be getting the LG hanger soon and supposed it supports more weight even easier.I'll soon find out.

I only recommend using any vacuum hanger with water. I'll be making a video showing how I apply it someday
 
youknowme123321;675143 said:
I hang up to 13 lbs with the VH3 without any problems. I use water instead of tape and other materials though to prevent blistering or discoloration. Water works amazing. I hang 13lbs for up to an hour straight. I will be getting the LG hanger soon and supposed it supports more weight even easier.I'll soon find out.

I only recommend using any vacuum hanger with water. I'll be making a video showing how I apply it someday



Do u fill the bell with water?

Can u explain in words before making a vid? Very interested as im looking to get the vac hanger soon
 
I'd love to see a legit solution to blistering with vac hangers. I don't think one exists though. Outside the manufacturer and fanboy hype of a given device. The design of vac hangers is always the same and they all have the same limitations based around vacuum on the epidermis of the penis. You can only protect the penis up to a certain limit from vacuum. You cannot change the 'science' though inside the chamber. A certain weight will always create a certain amount of vacuum inside the hanger chamber.
I'm not knocking whatever device, I'm just sharing my thoughts from first hand experience with several device and feedback I've seen over several years. You can change a design all you want, wrap however, put whatever in the vac chamber, but you cannot change the fact that you still have a certain HG (or vacuum) inside it with each weight level reached. The penis can only adapt so much to whatever level of vacuum.
Penis pumpers only go up to and know not to exceed certain vacuum levels. Do vac hangers think the rules don't apply to them?
 
Last edited:
youknowme123321;675143 said:
I hang up to 13 lbs with the VH3 without any problems. I use water instead of tape and other materials though to prevent blistering or discoloration. Water works amazing. I hang 13lbs for up to an hour straight. I will be getting the LG hanger soon and supposed it supports more weight even easier.I'll soon find out.

I only recommend using any vacuum hanger with water. I'll be making a video showing how I apply it someday

how soon will this LG hanger VIDEO come out ? i am waiting.
 
stillwantmore2;675183 said:
I'd love to see a legit solution to blistering with vac hangers. I don't think one exists though. Outside the manufacturer and fanboy hype of a given device. The design of vac hangers is always the same and they all have the same limitations based around vacuum on the epidermis of the penis. You can only protect the penis up to a certain limit from vacuum. You cannot change the 'science' though inside the chamber. A certain weight will always create a certain amount of vacuum inside the hanger chamber.
I'm not knocking whatever device, I'm just sharing my thoughts from first hand experience with several device and feedback I've seen over several years. You can change a design all you want, wrap however, put whatever in the vac chamber, but you cannot change the fact that you still have a certain HG (or vacuum) inside it with each weight level reached. The penis can only adapt so much to whatever level of vacuum.
Penis pumpers only go up to and know not to exceed certain vacuum levels. Do vac hangers think the rules don't apply to them?

Yep this is what I am thinking. I find it very hard to believe some guys go over 10 pounds with this device. The pressure would be unreal.
 
Commodore;675184 said:
how soon will this LG hanger VIDEO come out ? i am waiting.

There is no video yet? I figured there would be since these have been around for a while. Hopefully Still will shoot one soon.
 
doublelongdaddy;675207 said:
There is no video yet? I figured there would be since these have been around for a while. Hopefully Still will shoot one soon.

I have a vacumhanger, but i want to see someone use vacum hanger with water and go 13+ lb.. DLD tell Still to make this video he listen to you
 
youknowme123321;675143 said:
I hang up to 13 lbs with the VH3 without any problems. I use water instead of tape and other materials though to prevent blistering or discoloration. Water works amazing.
Water would amplify vacuum, and make it even worse
 
Max Whitewood;675172 said:
Do u fill the bell with water?

Can u explain in words before making a vid? Very interested as im looking to get the vac hanger soon

Yes. I have the sleeve rolled up and stretch over the chamber. I fill the chamber with a bit of water. You learn how much pretty easily but will likely use to much or to little the first time. Holding the chamber so the the opening is up and no water will spill out place my glans into the chamber and water. I carefully pull back my foreskin (I'm cut) and then use a few fingers to roll the sleeve off the chamber and over my penis. Before I roll the sleeve all the way down my shaft I stretch the penis lightly so that the sleeve doesn't cover more of my penis. I then pull my penis so it is point upwards and any air in the chamber is at the top of the chamber near the hose. I apply gentle suction with my mouth then disengage the clamp and suck out the air. Once there is no air I shake the chamber gently and pull on it to move around any air hidden in the chamber around the penis (there is always air around the glans). That air is then floating at the top of the chamber near the hose. I apply light suction and then disengage the clamp to suck out that air before clamping one last time. I am now ready to hang and there is minimal air left in the chamber. There is always a small amount left behind. In the pic I will post you will see air. As more weight is applied the air bubble looks bigger. When the weight is release the bubble's size decreases.

stillwantmore2;675183 said:
I'd love to see a legit solution to blistering with vac hangers. I don't think one exists though. Outside the manufacturer and fanboy hype of a given device. The design of vac hangers is always the same and they all have the same limitations based around vacuum on the epidermis of the penis. You can only protect the penis up to a certain limit from vacuum. You cannot change the 'science' though inside the chamber. A certain weight will always create a certain amount of vacuum inside the hanger chamber.
I'm not knocking whatever device, I'm just sharing my thoughts from first hand experience with several device and feedback I've seen over several years. You can change a design all you want, wrap however, put whatever in the vac chamber, but you cannot change the fact that you still have a certain HG (or vacuum) inside it with each weight level reached. The penis can only adapt so much to whatever level of vacuum.
Penis pumpers only go up to and know not to exceed certain vacuum levels. Do vac hangers think the rules don't apply to them?

It exists with water. I have experienced no blistering since beginning to use water. I did when trying to go heavy and use various wrapping techniques from tape to glans caps and everything in between. The vacuum pressure that exists within a vachanging chamber when using water is different from a water pump such as a bathmate. With a vachanger there is no where for the water to escape from to apply the constant penis expanding vacuum pressure that we see with water pumps. Water pumps push or suck water out giving a negative pressure that results in strong vacuum pressure leading to tissue expansion. With a vachanger, once most of the air is removed from the chamber and it is clamped off so that no more air can escape, the vacuum pressure that increases with added weight leads to a compressing force to be applied to glans through the water. This compressing force provides protection against blistering and discoloration. I still experience slight glans swelling (edema) after removing the cap but that goes away within 30 or so minutes (though I wish it wouldn't, lol) and mild discoloration that goes away within 5 minutes.

Commodore;675184 said:
how soon will this LG hanger VIDEO come out ? i am waiting.

Not till the new year. I probably won't receive it until the first or second week of December and then have to use it to be able to make a good honest review.

deadwood187;675190 said:
Yep this is what I am thinking. I find it very hard to believe some guys go over 10 pounds with this device. The pressure would be unreal.

Read my explanation above to SWM. And I'll attach a pic for now that I took tonight while hanging with the VH3

Commodore;675233 said:
I have a vacumhanger, but i want to see someone use vacum hanger with water and go 13+ lb.. DLD tell Still to make this video he listen to you

I'll have that video up in January but for now will attach a pic. I do it lying down in bed using suspender belts or a resistant band to create the tension.
templnite;675240 said:
Water would amplify vacuum, and make it even worse

Untrue. Read my reply above to SWM explaining why water works to prevent blistering and discoloration.

- - - Updated - - -

View attachment 31226

Here you can see me hanging 12.73 lbs using the VH3 with water. I can maintain this weight for an hour with no issues. A small air bubble can be seen. The glans looks very enlarged in the pic but that is only b/c water magnifies. That much swelling has not occurred to me. I built up weight slowly though over a long period of time just like you should do with any hanging device. As I explained above the air bubble expands and increases in size with added weight but shrinks to practically nothing when no weight is applied. There will always be a small amount of air left in the chamber. At the top of the pic the 2 clips from the suspenders can be seen. Usually I attach those right to the glans cap bar. Since they are attached to the scale I couldn't get over 13 lbs b/c the suspenders were less stretched and I couldn't sit back any further in bed. The suspenders are at max tension. I will start using a resistant band again once I decide to increase the tension but for now I am comfortable here.

Since becoming more experience with vachanging over the months it is my belief this is the best way to hang. BUT ONLY WITH WATER!! If you don't use water expect blistering. The other benefit to water is you don't have to spend money on wrapping materials. Just super small amounts of water lol.

Tools like the lengthmaster still have their place though. I recommend using one to perform manual stretches, especially bundled stretches, before a hanging session. I feel tools like the bib or malehanger2 will be used less and less until only the uneducated are buying them. And if money is an issue and that is why someone is buying a hanger then look into the gripping trainer. It is cheaper and much better.

I will make a video in January. Sooner if we are all lucky but most likely not until the new year
 

Attachments

  • IMG_1243.jpg
    IMG_1243.jpg
    294.1 KB · Views: 30
Last edited:
The whole idea of hanging is that you apply a good force a good time. With vachangers you cant even use more force than you could using two hands lol. With the lengthmaster you not only get way more pull, but you can do a thousand more exercises
 
templnite;675275 said:
The whole idea of hanging is that you apply a good force a good time. With vachangers you cant even use more force than you could using two hands lol. With the lengthmaster you not only get way more pull, but you can do a thousand more exercises

Yes applying good force for a good time is important for success when hanging. This is possible with vachanging tools. If you read my post above you will understand and also see how it is achieved.

Why would you want to apply more force than you could using two hands with any PE tools? Attempting to do so with a lengthmaster, bib, hanger, vachanger, or any PE tool would lead to bad injury. The hands can apply great force. Much more then anyone would want to use on their penis.

If you actually go back and read all of my post and not just scan over briefly, you will see that I recommended the lengthmaster b/c it can be used for performing many exercises.
 
Sure bud that's why nobody ever uses vachanger XD. Why try to make it more 'scientific' than it needs to be
 
Here is my glans within 30 seconds of removing the VH3 at 12.73 lbs for 62 minutes. No issues whatsoever. There is just very mild fluid build up (edema). Hope this helps men who have vachangers or who are interested in them. Sorry to those who don't want to see the benefits of vachanging but PE has to advance with or without you.

View attachment 31227
 

Attachments

  • IMG_1244.jpg
    IMG_1244.jpg
    292.2 KB · Views: 32
Last edited:
templnite;675278 said:
Sure bud that's why nobody ever uses vachanger XD. Why try to make it more 'scientific' than it needs to be

Wow your responses are so useless. Really? You think nobody uses vachangers? PE will advance with or without you. Likely without you b/c you stick with a thought and there is no room for thought expansion and new ideas. You respond to reasonable explanation with nonsense. I am surprised you can read and write.

Why try to make it more 'scientific' than it needs to be??? how can you say that? Well you can say that b/c you type without thinking. If DLD and the other pioneers of PE thought that way PE would have never gone anywhere. They would have just agreed and not tried to make advancements in PE like they did. You want PE to stay right where it is now?

ANyone reading this please start at post #12. Pay special attention to the uselessness of tempinites posts
 
Vachangers are like a person using crutches. You cant get a compression type to work so you go with the baby type. I would like science to advance so they can help your voice not sound like a twelve year old chick XDXDXD
 
youknowme123321;675281 said:
Wow your responses are so useless. Really? You think nobody uses vachangers? PE will advance with or without you. Likely without you b/c you stick with a thought and there is no room for thought expansion and new ideas. You respond to reasonable explanation with nonsense. I am surprised you can read and write.

Why try to make it more 'scientific' than it needs to be??? how can you say that? Well you can say that b/c you type without thinking. If DLD and the other pioneers of PE thought that way PE would have never gone anywhere. They would have just agreed and not tried to make advancements in PE like they did. You want PE to stay right where it is now?

ANyone reading this please start at post #12. Pay special attention to the uselessness of tempinites posts


You don't use the pink cone at all? Is that just the compress sleeve or the sealing sleeve (they feel like the same material)? I wonder if it's the pink cone causing me problems.
 
deadwood187;675283 said:
You don't use the pink cone at all? Is that just the compress sleeve or the sealing sleeve (they feel like the same material)? I wonder if it's the pink cone causing me problems.

I use to use it and never had any problems with it but tried just the sleeve one day and it worked better. I think it was a sealing sleeve but I cut it to the perfect size so it doesn't matter
 
Back
Top Bottom