Super Stealth Forte: The Ultimate ADS

Aimingforthetop · Jan 13, 2016

Supra;682163 said:
I am wondering how to get rid of this pump attached, it would make this so much more discrete for wearing outside the house.

make a rubber copy of the pump fitting through molding.

attach a small plastic tube on the mold. then you just need a way to pump up vacuum and hold it in that which shouldn't be that hard.

i don't think that PF want's to sell new pumps. because you pretty much have 3 PF if you have 3 pumps.

but taking a pump and cut off the top of it. and attach a small tube with silicone would probably be the easiest way to fix this.

Aimingforthetop · Jan 13, 2016

i made a paint illustration to brag about my mad paint skills

the problem is to find a silicone that will get glued properly to both the tube and to the PF pump base.

DLD · Jan 13, 2016

Aimingforthetop;682167 said:
i made a paint illustration to brag about my mad paint skills

the problem is to find a silicone that will get glued properly to both the tube and to the PF pump base.

You are a pro!

Thanks for helping describe this.

Aimingforthetop · Jan 14, 2016

doublelongdaddy;682179 said:
You are a pro! Thanks for helping describe this.

You can call me aimingvangogh

LONGERDICK7+ · Jan 14, 2016

Aimingforthetop;682167 said:
i made a paint illustration to brag about my mad paint skills

the problem is to find a silicone that will get glued properly to both the tube and to the PF pump base.

If u designed the whole thing definitely you are good,but if you just designed that strange worm kind of thing, i think you need to practice a bit moreLOL JK

Super · Jan 14, 2016

Aimingforthetop;682166 said:
make a rubber copy of the pump fitting through molding.

attach a small plastic tube on the mold. then you just need a way to pump up vacuum and hold it in that which shouldn't be that hard.

i don't think that PF want's to sell new pumps. because you pretty much have 3 PF if you have 3 pumps.

but taking a pump and cut off the top of it. and attach a small tube with silicone would probably be the easiest way to fix this.

Has this worked for you?

Aimingforthetop · Jan 14, 2016

Supra;682268 said:
Has this worked for you?

Nope. Im just coming with suggestions

DLD · Jan 14, 2016

Aimingforthetop;682282 said:
Nope. Im just coming with suggestions

Thats the DLD way! Thought experiments have served me very well throughout my life.

Muffbuster · Mar 3, 2016

Supra;682163 said:
I am wondering how to get rid of this pump attached, it would make this so much more discrete for wearing outside the house.

Order a quick disconnect female & male connecter from Joel Kaplan. Cut the top off the PF bell, drill the hole close to size. Use a 3/8x24 tap for the hole. Attach a clear hose to the qd male end. Done! I've done this mod but I drilled the top of the bell oversize & put a jam nut on the inside to snug it down. Loses suction so I'm going to use some clear epoxy on the inside of the bell when I get a chance.

DLD · Mar 3, 2016

Muffbuster;689428 said:
Order a quick disconnect female & male connecter from Joel Kaplan. Cut the top off the PF bell, drill the hole close to size. Use a 3/8x24 tap for the hole. Attach a clear hose to the qd male end. Done! I've done this mod but I drilled the top of the bell oversize & put a jam nut on the inside to snug it down. Loses suction so I'm going to use some clear epoxy on the inside of the bell when I get a chance.

Great description, thanks Muff!

templnite · Mar 3, 2016

Its funny how supras profile pic is of smallville, yet has huge cock :/. At least ya got rid of the avatar man, superman is pretty much animae to me. Get some black ops shit on since you're a veteran. I'm a vet too, of the war on drugs

gnome2 · Mar 5, 2016

This is intriguing - but unfortunate the Achilles heel of the PF condoms is still in play.

In the end that's what has me not wanting to spend the money on the PF... The (almost) ridiculous sensitivity of them to tearing.

LONGERDICK7+ · Mar 5, 2016

gnome2;689683 said:
This is intriguing - but unfortunate the Achilles heel of the PF condoms is still in play.

In the end that's what has me not wanting to spend the money on the PF... The (almost) ridiculous sensitivity of them to tearing.

i have been wearing the PF for the last 2 weeks n the condoms seems to last a bit more than the glans cap..id be more worried about breaking the glans cap.

i think If you order through mos you can get an extra pack of condoms..i think is a great device a bit fragile tough..hope mine lasts more than 8 months

Muffbuster · Mar 10, 2016

Muffbuster;689428 said:
Order a quick disconnect female & male connecter from Joel Kaplan. Cut the top off the PF bell, drill the hole close to size. Use a 3/8x24 tap for the hole. Attach a clear hose to the qd male end. Done! I've done this mod but I drilled the top of the bell oversize & put a jam nut on the inside to snug it down. Loses suction so I'm going to use some clear epoxy on the inside of the bell when I get a chance.

Ok, update. I have 3 different female qd connectors & they're 2 different sizes. 1/8 npt on one. I found 2 different size o-rings also. Drill the bell with a 21/64ths bit &tap with 1/8 npt tap. I use a thick o-ring first, screw it into the bell. On the inside I add a thin o-ring with a brass jam nut because it's thinner. Look in the lighting section at the hardware store for these. Once everything is tightened down, NO LEAKAGE!! I tried to post pics but it didn't work

Muffbuster · Mar 27, 2016

Supra;682163 said:
I am wondering how to get rid of this pump attached, it would make this so much more discrete for wearing outside the house.

Supra I sent you a pm.

DLD · Mar 28, 2016

Muffbuster;690252 said:
Ok, update. I have 3 different female qd connectors & they're 2 different sizes. 1/8 npt on one. I found 2 different size o-rings also. Drill the bell with a 21/64ths bit &tap with 1/8 npt tap. I use a thick o-ring first, screw it into the bell. On the inside I add a thin o-ring with a brass jam nut because it's thinner. Look in the lighting section at the hardware store for these. Once everything is tightened down, NO LEAKAGE!! I tried to post pics but it didn't work

You can send me the pictures and I will post for you. guru.dld@gmail.com

DLD · Apr 1, 2016

Here are the Muffbuster pictures:

superman05xx · Apr 1, 2016

Awhile ago I thought this might have been possible with a narrow enough pumping tube .... But I never experimented.

F26 · Nov 11, 2019

@Super this is incredible and I'm excited trying this soon!
I'll try it with my Penimaster chamber, should maybe even work better as it takes less work of attaching and taking it off.
Also soon getting a Phallosan! $\o/$
As that's not enough I've also ordered the corkscrew, this could really be an awesome method for stretching downwards/wearing an extender downwards all day long

Sadly you're not that often here anymore, I love bumping your threads up as you've done such a great work in the past and tested lots of things.
If you ever read this - thanks for all that work! Even if you're not doing PE anymore, your old work and threads are helping us newbies a lot.

Cheers!

DLD · Nov 11, 2019

F26 said:
@Super this is incredible and I'm excited trying this soon!
I'll try it with my Penimaster chamber, should maybe even work better as it takes less work of attaching and taking it off.
Also soon getting a Phallosan! $\o/$
As that's not enough I've also ordered the corkscrew, this could really be an awesome method for stretching downwards/wearing an extender downwards all day long

Sadly you're not that often here anymore, I love bumping your threads up as you've done such a great work in the past and tested lots of things.
If you ever read this - thanks for all that work! Even if you're not doing PE anymore, your old work and threads are helping us newbies a lot.

Cheers!

he usually comes around every few months.

Super Stealth Forte: The Ultimate ADS

Active member

Active member

Attachments

doublelongdaddy

Active member

Active Member

Well-known member

Active member

doublelongdaddy

0

doublelongdaddy

0

0

Active Member

0

0

doublelongdaddy

doublelongdaddy

Attachments

0

Well-known member

doublelongdaddy

Similar threads