- Joined
- Jun 3, 2003
- Messages
- 4,176
Inside your SiliStretcher package you will find the following contents:
Before using the SiliStretcher, make sure your penis shaft is free of hair, oil, cream, clean, dried and powdered with the supplied MOSGrip gripping powder. Hairs & oil on the penis will create loss of suction/grip with the Blue SiliSleevs and the SiliStretcher.
Setting the Piston
The piston disk with the two black o-rings inside the SiliStretcher should be retracted half way into the SiliStretcher when you receive it. If not, retract it to the half way point. This will provide better grip and more comfort during use.
SiliPads
The Blue Silipads are interchangeable and provide an extra level of comfort and help reduce fluid retention by contouring to the shape of your penis. You can also use the SiliStretcher without the SiliPads if desired. Try to use the SiliCap when using the SIliStretcher with and without the SiliPads.
When you receive your SiliStretcher, the blue contoured silicone SiliPad is pre-installed. You can start with this one and/or exchange with one of the other two jel pads provided. Each user has different preferences based on penis shape, size and method used.
SiliSleevs
There are two different diameter and lengths of the SIliSleevs included. Find the size that fits you best without slippage or causing your penis to get cold after long hours of use. They are all interchangable with the SiliStretcher
SiliCap
For people that are new to vacuum pumping or using a vacuum system similar to the SiliStretcher, you may find fluid build up in the tip of your penis after excessive tension/weight or long periods of use. This is normal and can be massaged out after use of the SiliStretcher.
The Blue SiliCap helps reduce fulid rentention in the head (glans) of your penis. Use both the SiliCap with th SiliPad in the beginning. Once your penis is accustomed to vacuum pressure, you may find that you can eliminate the SiliCap and just use the SiliPads to prevent fluid retention.
Silicone Lube for Maintenance
The included silicone lube is for greasing the edges of the silipads so they slide in and out the SiliStretcher with ease. The silicone lube is also used to grease the o-rings to increase the life of them and assure maximum vacuum when needed.
Using the SiliStretcher
Carefully attach the Blue SiliSleev that was included inside the velvet bag with the SiliStretcher. Make sure the thick-band end of the SiliSleev is attached to the SiliStretcher bell and is straight on.
Put the Blue SiliCap on the head of your penis to prevent fluid retention, blistering, bruising and reduce sensitivity.
Roll the SiliSleev back over the SiliStretcher
Put the head of your penis into the SiliStretcher
Unroll the SiliSleeve over the shaft of your penis
Turn the SiliStretcher vacuum piston knob a half twist counter-clockwise. One half turn of the vacuum piston knob is 7 in.-Hg of vacuum. Your penis will be safely pulled and secured into the SiliStretcher. Give the SiliStretcher a tug to test if you are properly secured inside the SiliStretcher before applying tension or weight.
DO NOT OVER VACUUM
Do not use excessive vacuum to the point the SiliStretcher starts pulling the SiliSleev inside the SiliStretcher. This will cause micro pin holes in the SiliSleevs and cause loss of vacuum.
Attach the ADS belt or hanger clip to the end of the SiliStretcher.
Adjust tension or weight and begin session.
To release vacuum, give the SiliStretcher vacuum piston knob a twist in the opposite direction.
Maximize the life of your SiliSleevs
To maximize the life of your SiliSleeves, remove them from the SiliStretcher when not in use. Do not keep them rolled up for any period of time as this will likely stretch, deform and/or split them. Keep them clean, dried, powdered with MOSGrip and store in a ziplock bag away from direct sun or heat.
Maximize the life of your SiliStretcher
When you are done using the SiliStretcher, extract the piston back to the bottom of the SIliStretcher to relieve pressure on the clear vacuum cylinder. The SiliStretcher cylinder is slightly tapered at the top, when you leave the piston retracted when not in use, the piston adds more tension to the cylinder and o-rings. This may cause a hairline crack over time and extra compression on the o-rings.
We are releasing complimentary structure rings to permanently slide over the top of the cylinder to counteract this.
How long to use? How much tension? How much weight?
Start off light and slow, listen to your body. There is no rush, from what we learned over the course of 20 years us that heavy tension/weights for short period sessions is not the way to gain penis length. You want moderate tension and weight for long periods of time. This allows your penis tissue to expand and then heal in the extended state.
For the first three days, start with an hour or two of use at moderate tension and let your penis get accustomed to stretching. Then gradually work up to six hours or more per day as you slowly increase tension.
More Info
For further information, videos and routines on the SiliStretcher, please visit our support forum at
mattersofsize.com
Contact Support
support@mattersofsize.com
- SiliStretcher(s) of choice
- Blue SiliPad and gel pads
- Blue SiliSleevs & SiliCap
- ADS (All Day Stretcher) Belt with clip
- Hanging arbor and spring clip
- Weight plates
- MOSGrip gripping powder
- Silicone lube for maintenance
- Discrete carry bag
Before using the SiliStretcher, make sure your penis shaft is free of hair, oil, cream, clean, dried and powdered with the supplied MOSGrip gripping powder. Hairs & oil on the penis will create loss of suction/grip with the Blue SiliSleevs and the SiliStretcher.
Setting the Piston
The piston disk with the two black o-rings inside the SiliStretcher should be retracted half way into the SiliStretcher when you receive it. If not, retract it to the half way point. This will provide better grip and more comfort during use.
SiliPads
The Blue Silipads are interchangeable and provide an extra level of comfort and help reduce fluid retention by contouring to the shape of your penis. You can also use the SiliStretcher without the SiliPads if desired. Try to use the SiliCap when using the SIliStretcher with and without the SiliPads.
When you receive your SiliStretcher, the blue contoured silicone SiliPad is pre-installed. You can start with this one and/or exchange with one of the other two jel pads provided. Each user has different preferences based on penis shape, size and method used.
SiliSleevs
There are two different diameter and lengths of the SIliSleevs included. Find the size that fits you best without slippage or causing your penis to get cold after long hours of use. They are all interchangable with the SiliStretcher
SiliCap
For people that are new to vacuum pumping or using a vacuum system similar to the SiliStretcher, you may find fluid build up in the tip of your penis after excessive tension/weight or long periods of use. This is normal and can be massaged out after use of the SiliStretcher.
The Blue SiliCap helps reduce fulid rentention in the head (glans) of your penis. Use both the SiliCap with th SiliPad in the beginning. Once your penis is accustomed to vacuum pressure, you may find that you can eliminate the SiliCap and just use the SiliPads to prevent fluid retention.
Silicone Lube for Maintenance
The included silicone lube is for greasing the edges of the silipads so they slide in and out the SiliStretcher with ease. The silicone lube is also used to grease the o-rings to increase the life of them and assure maximum vacuum when needed.
Using the SiliStretcher
Carefully attach the Blue SiliSleev that was included inside the velvet bag with the SiliStretcher. Make sure the thick-band end of the SiliSleev is attached to the SiliStretcher bell and is straight on.
Put the Blue SiliCap on the head of your penis to prevent fluid retention, blistering, bruising and reduce sensitivity.
Roll the SiliSleev back over the SiliStretcher
Put the head of your penis into the SiliStretcher
Unroll the SiliSleeve over the shaft of your penis
Turn the SiliStretcher vacuum piston knob a half twist counter-clockwise. One half turn of the vacuum piston knob is 7 in.-Hg of vacuum. Your penis will be safely pulled and secured into the SiliStretcher. Give the SiliStretcher a tug to test if you are properly secured inside the SiliStretcher before applying tension or weight.
DO NOT OVER VACUUM
Do not use excessive vacuum to the point the SiliStretcher starts pulling the SiliSleev inside the SiliStretcher. This will cause micro pin holes in the SiliSleevs and cause loss of vacuum.
Attach the ADS belt or hanger clip to the end of the SiliStretcher.
Adjust tension or weight and begin session.
To release vacuum, give the SiliStretcher vacuum piston knob a twist in the opposite direction.
Maximize the life of your SiliSleevs
To maximize the life of your SiliSleeves, remove them from the SiliStretcher when not in use. Do not keep them rolled up for any period of time as this will likely stretch, deform and/or split them. Keep them clean, dried, powdered with MOSGrip and store in a ziplock bag away from direct sun or heat.
Maximize the life of your SiliStretcher
When you are done using the SiliStretcher, extract the piston back to the bottom of the SIliStretcher to relieve pressure on the clear vacuum cylinder. The SiliStretcher cylinder is slightly tapered at the top, when you leave the piston retracted when not in use, the piston adds more tension to the cylinder and o-rings. This may cause a hairline crack over time and extra compression on the o-rings.
We are releasing complimentary structure rings to permanently slide over the top of the cylinder to counteract this.
How long to use? How much tension? How much weight?
Start off light and slow, listen to your body. There is no rush, from what we learned over the course of 20 years us that heavy tension/weights for short period sessions is not the way to gain penis length. You want moderate tension and weight for long periods of time. This allows your penis tissue to expand and then heal in the extended state.
For the first three days, start with an hour or two of use at moderate tension and let your penis get accustomed to stretching. Then gradually work up to six hours or more per day as you slowly increase tension.
More Info
For further information, videos and routines on the SiliStretcher, please visit our support forum at
SiliStretcher Vacuum Penis Stretcher Forum
This forum is for discussion of the SiliStretcher All Day Vacuum Penis Stretcher and Hanger. and contains "How To" Videos, Q&A's and user discussion.
mattersofsize.com
Contact Support
support@mattersofsize.com
Last edited:
