SiliStretcher Overnight Testing / wearing while sleeping

DLD

DLD

doublelongdaddy
Administrator
Super Moderator
Registered
Joined
Jun 3, 2003
Messages
124,367
SiliStretcher Overnight Testing
It was something I really hoped would work as it would be a solid 7-10 hours of passive healing. I found it to be more dangerous than safe. If you picture laying on your side with the SiliStretcher in an upward position and remained that way you may be able to go all night. The problems happen the minute you roll, things loosen and start to pinch. Aside from this many may see retention based on moving. I am a back sleeper and I go from side to side so you can imagine how frustrating this could get.

A stomach sleeper should NOT even try this, your problems will start a couple hours in. The only way I see this going through the night is if you are a backsleeper who never rolls.

Do not loose hope! We have also tested the SiliSleeve overnight with success. This will be what I will use in overnight SRT training. Very safe and will retain elongation. @Haursen successfully made it through the night without issue. I will test myself tonight but I also trust Hauren’s opinion.

I am now designing an overnight device that will be safe and give some intensity without risk. I am basing off another platform with hopes Lighting can make it.

CONCLUSION There are plenty of hours in the day to get active, gainful toolwork. The SiliStretcher is a tool and should not be worn through the night as it loosens and pinched on any kind of rolling over. The SiliSleeve or ACE are the only two current methods that can be worn through night.
 
Trial and error...think how many times the inventor of Dyson vacuum cleaner failed...

Don't know?

He failed to create his vacuum by creating "5,126 versions that failed before he made one that worked!"

Onward and upward!

www.entrepreneur.com

James Dyson on Using Failure to Drive Success | Entrepreneur

The innovative inventor of the dual cyclone vacuum cleaner explains why failing is a key component to the creative process.
www.entrepreneur.com www.entrepreneur.com
 
DLD said:
SiliStretcher Overnight Testing
It was something I really hoped would work as it would be a solid 7-10 hours of passive healing. I found it to be more dangerous than safe. If you picture laying on your side with the SiliStretcher in an upward position and remained that way you may be able to go all night. The problems happen the minute you roll, things loosen and start to pinch. Aside from this many may see retention based on moving. I am a back sleeper and I go from side to side so you can imagine how frustrating this could get.

A stomach sleeper should NOT even try this, your problems will start a couple hours in. The only way I see this going through the night is if you are a backsleeper who never rolls.

Do not loose hope! We have also tested the SiliSleeve overnight with success. This will be what I will use in overnight SRT training. Very safe and will retain elongation. @Haursen successfully made it through the night without issue. I will test myself tonight but I also trust Hauren’s opinion.

I am now designing an overnight device that will be safe and give some intensity without risk. I am basing off another platform with hopes Lighting can make it.

CONCLUSION There are plenty of hours in the day to get active, gainful toolwork. The SiliStretcher is a tool and should not be worn through the night as it loosens and pinched on any kind of rolling over. The SiliSleeve or ACE are the only two current methods that can be worn through night.
Click to expand...

Trial and error...think how many times the inventor of Dyson vacuum cleaner failed...

Don't know?

He failed to create his vacuum by creating "5,126 versions that failed before he made one that worked!" (see article below)

Onward and upward!

P.S. I successfully slept with a long sleeve too...I folded it at the top and only minor (very minor) discomfort.

www.entrepreneur.com

James Dyson on Using Failure to Drive Success | Entrepreneur

The innovative inventor of the dual cyclone vacuum cleaner explains why failing is a key component to the creative process.
www.entrepreneur.com www.entrepreneur.com
 
Right there with you Brother!

Edison was fired from his first two jobs for being "non-productive." As an inventor, Edison made 1,000 unsuccessful attempts at inventing the light bulb. When a reporter asked, "How did it feel to fail 1,000 times?" Edison replied, "I didn't fail 1,000 times. I found 1000 ways NOT to make light bulb”
 
I tried an overnight run as well - ended up with a tiny blister and a really weird pump on an area about two centimeters in diameter around the urethra, even with the silicap. Would not recommend - Zenhangers makes some pretty good sleeves which work great for overnight use. Just be sure to get one that covers all the way from the base to well over the end of the glans - otherwise it acts as a cockring, and will potentially cause an expanded cold glans overnight.

Edit - if anything, a glans cap with the wall thickness of the 1" diameter anti-turtle sleeves from Zenhangers would be ideal - there is enough compression there that I don't think the vacuum effect from the silihanger would cause any sort of fluid buildup on the glans. I don't know if it was fluid buildup, just seemed like it. I'll post a picture of what it looked like if it happens again.
 
Last edited:
Great minds think alike!? I appreciate you also trying this and confirming that the SiliStretcher should not be worn through sleeping. But by all means you can use the SiliSleeve through the night!
 
Growin7777 said:
How much of a stretch does the long SiliSleeve give when wearing? I just put in order in for the standard and long set.
Click to expand...

It gives a very comfortable stretch that will hold you at your flaccid stretch length over the course of the day. It is made to heal in a elongated state as to gain faster.
 
I'm going to try wearing the silistretcher with silicap, silipad at night while in bed sleeping on my back.

Using 5lbs weight, I will have a length of string attached to the silistretcher, the plate, and hang that plate off the end of the bed whie I sleep.

With the silicap, it protects the glans, the silipad is further protection and comfort. As its 5lbs, its very light, and this will be further reduced slightly with the bed taking some of the poundage, working as resistance.

What matters here is comfort, safety, and being able to execute something so simple, that can be very effective.

SIlistretcher in itself is deadly comfortable, and so, wearing it while on ones back sleeping using very light weight shouldn't be such an eye opener.
 
Awesome, I’m looking forward to your review.
 
Slept with it attached to a length of material attached to a 2.5kg plate over the edge of the bed. Siliscale had it with a force of 1.7-1.9kg which is due to the bed taking some of the weight, which isn't a problem here as I wanted to hang lightly like that, and see how it went.

Managed 4 hours straight. I removed it then due to some discomfort. I'm uncut, which can be a battle with some equipment. Foreskin doesn't always like playing ball. I had it pulled back before entering, had a silipad in place.

In future I will use silicap , the softer silipad .

No damage to the penis, just a slight indentation where the glans had pressed against the inside.

Wouldn't recommend this approach with anything over 7kg as more weight will equal more pressure inside this device, which could give more problems like swelling. Lets see.

For obvious reasons, back only.
 
Red thank you so much for testing this. You got to four hours maybe with some adjustment you can make the eight hour mark. Maybe a slight adjustment intention.
 
Are you going to give it a go again tonight?
 
I hope you can make it through the night.
 
Yeah, I went for another night session with the silistretcher on using a light plate hanging over the edge of the bed while sleeping on my back.

Used the silicap this session for additional precaution in case swelling developed, and I was slightly concerned, due to sleeping and not having a clue what may happen, but as well, I haven't been sleeping well, my thyroid is not good, and I need hospital tests on it. But anyway here we go.

I managed to go about 6 hours, but I needed to remove it, due to restlessness. I just wanted to sleep on my side, or stomach.

No marks on my penis, just a very slight indentation where the cap had been on my shaft, it wasn't anything nasty, just like when you rest a foot on a chair for ages, and when you look, its got a print where the cushion was.

My length was nice, it was in that stretched out molded state. I gave it a few helishakes, and just got everything out the way while I slept.

Pleased with this though, it shows that it can be done. However, light weight should be used, I cannot imagine using something like 20lbs let alone 50lbs with this method. I know that the bed mattress takes about 40/50% in resistance, from looking at the siliscale, but still using high weights will put more vacuum inside the silistretcher, which increases the chances of more going wrong.

I liken this to riding a bike in the park safely, compared to riding through a mine field.

The exciting thing, is that next week I will have the duro sleeves, and that should give more comfort as they are said to be superior to standard sleeves, more stronger to boot.

I might try rolling over while wearing this, as in theory it should be okay as its attched to the end.
 
REDZULU2003 said:
Yeah, I went for another night session with the silistretcher on using a light plate hanging over the edge of the bed while sleeping on my back.

Used the silicap this session for additional precaution in case swelling developed, and I was slightly concerned, due to sleeping and not having a clue what may happen, but as well, I haven't been sleeping well, my thyroid is not good, and I need hospital tests on it. But anyway here we go.

I managed to go about 6 hours, but I needed to remove it, due to restlessness. I just wanted to sleep on my side, or stomach.

No marks on my penis, just a very slight indentation where the cap had been on my shaft, it wasn't anything nasty, just like when you rest a foot on a chair for ages, and when you look, its got a print where the cushion was.

My length was nice, it was in that stretched out molded state. I gave it a few helishakes, and just got everything out the way while I slept.

Pleased with this though, it shows that it can be done. However, light weight should be used, I cannot imagine using something like 20lbs let alone 50lbs with this method. I know that the bed mattress takes about 40/50% in resistance, from looking at the siliscale, but still using high weights will put more vacuum inside the silistretcher, which increases the chances of more going wrong.

I liken this to riding a bike in the park safely, compared to riding through a mine field.

The exciting thing, is that next week I will have the duro sleeves, and that should give more comfort as they are said to be superior to standard sleeves, more stronger to boot.

I might try rolling over while wearing this, as in theory it should be okay as its attched to the end.
Click to expand...

How about doing this on your stomach and between the cheeks? This may be something to try.
 
This is a process Red and you’re doing a very good job getting through it. And I thank you for taking this for the team. I’m looking forward to your next session and what happens. Again thank you so much for doing this.
 
You must log in or register to reply here.

Similar threads

K
Questions before buying silistretcher
Replies
6
Views
240
squirt_inducer_man
squirt_inducer_man
squirt_inducer_man
O
Wishlist for updates to SiliStretcher 2.5 or 3?
Replies
1
Views
180
DLD
DLD
DLD
S
SiliStretcher help please!!!
Replies
3
Views
394
VoorheesXIII
VoorheesXIII
VoorheesXIII
W
Blood oops.
Replies
3
Views
173
squirt_inducer_man
squirt_inducer_man
squirt_inducer_man
B
Might buy Silistretcher!
Replies
3
Views
208
DLD
DLD
DLD
Back
Top Bottom