Silipads have turned it around for me! Silipad + Silistretcher = Comfort

REDZULU2003

Well-known member
Registered
Joined
Jun 3, 2003
Messages
20,066
I have been using the new Silipad + Silistretcher combo for the past few days, not all day, but for several hours during the day.

My initial trials started several days ago at night, and I was literally blown away with how different the silistretcher felt with the silipads inside!

You can refer to my findings on silistretcher in the following thread, so you know I haven't just gone along with this, or sugar coated it.


The issue I had without Silipads was the risk of getting too much sleeve distorted at the entrance point upon the piston being turned, and in time that leads to quicker fatigue of the sleeve, and holes forming (loudlycrying) we do not want that!

To my delight, when using a silipad, upon twisting the piston I noticed that the sleeve was not being distorted as it did at times in the past with the same amount of force ... this is a game changer! (100)

All three pads are comfortable, seriously it was tricky choosing one ... but I loved the contoured gel type the most, it feels amazing on your glans, you dont know its there. So soft, and molds to your shape at the glans tip.

Even the new sleeve I got sent was much better then the one I had with the initial package containing the silistretcher, as this one was not already attached to the silistretcher, which backs up what has been reported, that you need to keep the sleeves off the silistretcher when not in use.

So, I had this sleeve on nicely, it stretched better :) it was so easy to work with.

I hung 5lbs for 30 minutes straight down, no issues whatsoever. Felt great, very good grip . Shocking how good the grip was.

The siliscale also worked right away, and gave accurate readings. Very clever idea, its vital when using silistretcher for ADS, so you know exactly the amount of force your exerting.

I've hung 10lbs for 30 minutes straight down, that again felt fine, but I didn't want to go further due to knowing that these sleeves are not meant for that purpose or using heavy weights, and will await the deuros to come along for that.

During the day I have used the silistretcher with the contoured gel silipad for 5 hours using the silistrap, so the penis was pulled upwards 12 O'clock and I released that tension after 2 hours due to a toilet break.

No fluid retention was noted after the 5 hours, but I bet it would have been if I didn't have the silipad. It does make a big difference, in keeping FR at bay, comfort, and how the pressure is distributed inside the chamber, because that makes up more space inside, it will cause some effect on that aspect, whatever it is, it works well now.

So, a big thumbs up for the silipads (like) and I will have some pix up by tomorrow of my kit, with the one I like the most.

Finally what I will say though, is, with the gel silipads, they are sticky on the back ... this is for a reason, so they can grip to the plate.

You may at first upon turning the piston with the silipad inside, think WTF because it may curl a little inside the chamber, and seem to be not working right ... bare with it, this is nothing to be concerned about ... once you are fully retracted, this is before you enter the chamber of course, you now go in the opposite direction on the piston pushing the plate in the other direction.

Now it will become evident that the silipad has attached itself correctly, you will see it neaten up around the edges, ready for you to enter, and commence work :)

Any questions please ask
 

 
Great review my brother! I’m pretty sure mine just came in today I’m hoping to get to it by tonight.
 
I have been using the new Silipad + Silistretcher combo for the past few days, not all day, but for several hours during the day.

My initial trials started several days ago at night, and I was literally blown away with how different the silistretcher felt with the silipads inside!

You can refer to my findings on silistretcher in the following thread, so you know I haven't just gone along with this, or sugar coated it.


The issue I had without Silipads was the risk of getting too much sleeve distorted at the entrance point upon the piston being turned, and in time that leads to quicker fatigue of the sleeve, and holes forming (loudlycrying) we do not want that!

To my delight, when using a silipad, upon twisting the piston I noticed that the sleeve was not being distorted as it did at times in the past with the same amount of force ... this is a game changer! (100)

All three pads are comfortable, seriously it was tricky choosing one ... but I loved the contoured gel type the most, it feels amazing on your glans, you dont know its there. So soft, and molds to your shape at the glans tip.

Even the new sleeve I got sent was much better then the one I had with the initial package containing the silistretcher, as this one was not already attached to the silistretcher, which backs up what has been reported, that you need to keep the sleeves off the silistretcher when not in use.

So, I had this sleeve on nicely, it stretched better :) it was so easy to work with.

I hung 5lbs for 30 minutes straight down, no issues whatsoever. Felt great, very good grip . Shocking how good the grip was.

The siliscale also worked right away, and gave accurate readings. Very clever idea, its vital when using silistretcher for ADS, so you know exactly the amount of force your exerting.

I've hung 10lbs for 30 minutes straight down, that again felt fine, but I didn't want to go further due to knowing that these sleeves are not meant for that purpose or using heavy weights, and will await the deuros to come along for that.

During the day I have used the silistretcher with the contoured gel silipad for 5 hours using the silistrap, so the penis was pulled upwards 12 O'clock and I released that tension after 2 hours due to a toilet break.

No fluid retention was noted after the 5 hours, but I bet it would have been if I didn't have the silipad. It does make a big difference, in keeping FR at bay, comfort, and how the pressure is distributed inside the chamber, because that makes up more space inside, it will cause some effect on that aspect, whatever it is, it works well now.

So, a big thumbs up for the silipads (like) and I will have some pix up by tomorrow of my kit, with the one I like the most.

Finally what I will say though, is, with the gel silipads, they are sticky on the back ... this is for a reason, so they can grip to the plate.

You may at first upon turning the piston with the silipad inside, think WTF because it may curl a little inside the chamber, and seem to be not working right ... bare with it, this is nothing to be concerned about ... once you are fully retracted, this is before you enter the chamber of course, you now go in the opposite direction on the piston pushing the plate in the other direction.

Now it will become evident that the silipad has attached itself correctly, you will see it neaten up around the edges, ready for you to enter, and commence work :)

Any questions please ask
Are you where a silicap as well?
 
Use Silicone lube on the sides of the pads to help slide the SiliPads
 
For users that want to make the GelPad a smaller diameter, grab a razor blade and cut a small pie slice shape piece out of the GelPad (like a PacMac). This will close up the GelPad at a smaller diameter. You can do a little at a time until it fits to your liking.

When you fresh cut them they are very sticky, so the cuts will stick together.
 
Last edited:
Won't sit flush this normal?
View attachment 1821655


Looks like the piston is fully retracted, now rotate the piston to push that plate in the opposite direction.

That will neaten it all up, if you have issues still, then put some silicone gel on the sides that came with it, but in all honesty it should neaten out.

Use ONE silipad at a time, dont cram two, or three in all at once.
 
  • Like
Reactions: DLD
Place the silipad as shown in the image.
Ensure its pushed against the plate.

full



As you turn the piston your silipad will begin to become accustomed to the chamber.
Go all the way with the piston, so you reach the very end of the silistretcher.

Do this when your penis is NOT inside! its much easier to insert the silipad before a session commences.

Once your plate has reached the end of the chamber via turning the piston, you may notice the sides are a little uneven ... don't worry, now its time to turn the piston in the opposite direction, so that the plate returns back towards the entrance.

It should start to look at follows

full


full



You can push your finger into the silipad as your doing this at the start, to help keep it against the plate if need be.​

full
 
Place the silipad as shown in the image.
Ensure its pushed against the plate.

full



As you turn the piston your silipad will begin to become accustomed to the chamber.
Go all the way with the piston, so you reach the very end of the silistretcher.

Do this when your penis is NOT inside! its much easier to insert the silipad before a session commences.

Once your plate has reached the end of the chamber via turning the piston, you may notice the sides are a little uneven ... don't worry, now its time to turn the piston in the opposite direction, so that the plate returns back towards the entrance.

It should start to look at follows

full


full



You can push your finger into the silipad as your doing this at the start, to help keep it against the plate if need be.​

full

This should be made part of the instructions with the SiliStretcher thread.
 
Looks like the piston is fully retracted, now rotate the piston to push that plate in the opposite direction.

That will neaten it all up, if you have issues still, then put some silicone gel on the sides that came with it, but in all honesty it should neaten out.

Use ONE silipad at a time, dont cram two, or three in all at once.
Only using one, tried rotating forward to flatten helps a little but bunchs when retract / pull penis in, I bought original didn't come with lube being mailed as we speak I believe
 
These look pretty interesting, similar to what many if us old timers did. DLD do you think you might design a hanger that you attach a vacuum pump to?
 
These look pretty interesting, similar to what many if us old timers did. DLD do you think you might design a hanger that you attach a vacuum pump to?

We have already done that with the SiliStretcher. Please check it out below:

 
Yes I checked it out and think it's a pretty cool design. I mean like one where you can attach a hand pump or one with a built in vacuum gauge so the user knows exactly what pressure they are on?
 
Yes I checked it out and think it's a pretty cool design. I mean like one where you can attach a hand pump or one with a built in vacuum gauge so the user knows exactly what pressure they are on?

The SiliStretcher comes with a device that gives you the exact amount of intensity you’re using. If that’s the question you’re asking.
 
Yes I checked it out and think it's a pretty cool design. I mean like one where you can attach a hand pump or one with a built in vacuum gauge so the user knows exactly what pressure they are on?

I know what you mean, however, the silistretcher design removes the need for a hand pump as it uses a piston to commence a vacuum inside the cylinder.

You can have a feel for the pressure it handles with the following video, where Lightning demos the silistretcher to show its vacuum.



 
I know what you mean, however, the silistretcher design removes the need for a hand pump as it uses a piston to commence a vacuum inside the cylinder.

You can have a feel for the pressure it handles with the following video, where Lightning demos the silistretcher to show its vacuum.




Listen to this awesome video I hope everybody watches.
 
Back
Top Bottom