swedeguy

0
Registered
Joined
Jan 1, 2004
Messages
194
I've been wearing the ROP 24/7 for a while now and the past few days I've been getting these MASSIVE donuts when waking up in the morning, my cock looks totally deformed! Does anyone know how to prevent them?

Oh, and does anyone know where to get silicone tubing (or regular latex one even), I seem to be the only one that really wears out the tubing (it falls off, even when super glued!!) and I need some more...
 
Trust me bro I know wat ur sayin, my tubin always keeps poppin off durin the day, I can bearly wear my ROP no more :(
 
As I've said I've super glued mine to the rods but somehow the ends of the tubing seem to stretch out which makes it fall off..
 
the RoP coming off or crushing your dick means it is too tight. i had these issues and remade the rubber with a small amount more room, and now the thing NEVER comes off, no exaggeration.
being tight doesnt make it any more powerful after all..........
 
Too tight an it hurts, less loose an it pops off. I need new tubing.

Supra at mcmaster which category to i look under?
 
exact product codes are in a thread i started called RoP tubing mayday in the alternative forum
 
you can also pick the tubing up at home depot by 10 ft for $8.00 and lowe's you can get it by the ft. for $1.40
 
TimBo755 said:
you can also pick the tubing up at home depot by 10 ft for $8.00 and lowe's you can get it by the ft. for $1.40

Nice! thanks man, I'll go by homedepot right away.. To make things faster do I look in the plumbing section for latex tubing?
 
swedeguy said:
I've been wearing the ROP 24/7 for a while now and the past few days I've been getting these MASSIVE donuts when waking up in the morning, my cock looks totally deformed! Does anyone know how to prevent them?

Oh, and does anyone know where to get silicone tubing (or regular latex one even), I seem to be the only one that really wears out the tubing (it falls off, even when super glued!!) and I need some more...

swedeguy,

I looked into this issue recently, as I happen to be collecting the materials for making my own ROP. I searched briefly in my local area for some latex tubing, but ultimately resorted to a search on the internet. You can readily obtain both latex tubing and silicone tubing from companies that supply laboratory equipment. In the USA, examples of such companies include VWR, Fisher Scientific, and Cole-Parmer. I don't know for certain if any of these companies have global operations extending to Europe, but a quick search on the internet should answer that question. If not, then how would you identify a European equivalent? I'd suggest that you conduct a search on the internet for the keywords "silicone tubing." Even easier than that, why not visit the Dow-Corning website? Dow-Corning is a manufacturer of silicone tubing. You should be able to locate the distributors for your region at their website. This is how I found the three distributors mentioned above. Of those three, I found that VWR has the lowest prices and widest selection.

A slight inconvenience is that fact that a minimum order from one of these companies is a 50 foot reel of tubing. For the size of tubing you'll probably want, the cost is about $50 US, and upwards. The best deal I found was Dow Corning "Silastic" tubing (registered tradename) from VWR. I have a reel of Silastic tubing on order from VWR, and expect delivery within a few days. The tubing that I selected is Dow-Corning part no. 515-013 (VWR no. 62999-406). The dimensions are 3/16" ID x 5/16" OD with a wall thickness of 1/16."
I'm guessing that this tubing should be suitable for both ROP designs found at Tom Hubbards Penis Workshop (http://www.tomsnewsite.thundersplace.com/sperm.htm). A variety of other tubing dimensions are available, however, if you should happen to favor a different size.

In the long run, silicone tubing might be a better choice than latex. Latex rubber oxidizes and weakens over time, exactly like a rubber band. Also, some people are allergic to latex (reaction to foreign proteins imbedded in the natural plant rubber). Once the tubing arrives and I can verify that it is indeed suitable, I plan to post an announcement at MOS offering to provide tubing at cost plus shipping to MOS members in the USA, while the supply lasts. I'd be glad to send a sample on the same terms to you, but dealing with foreign currencies is troublesome. So, I'd like to offer you a free 30 cm sample - my treat. If that seems too generous, then perhaps we can work out some kind of trade: a sample of Gefilte fish in exhange the Silastic tubing, for example. Just kidding... How about a "thank you" postcard featuring a photo of a beautiful Sweedish babe?

Cheers,

smiley
 
swedeguy said:
I've been wearing the ROP 24/7 for a while now and the past few days I've been getting these MASSIVE donuts when waking up in the morning, my cock looks totally deformed! Does anyone know how to prevent them?

Oh, and does anyone know where to get silicone tubing (or regular latex one even), I seem to be the only one that really wears out the tubing (it falls off, even when super glued!!) and I need some more...

swedeguy,

I looked into this issue recently, as I happen to be collecting the materials for making my own ROP. I searched briefly in my local area for some latex tubing, but ultimately resorted to a search on the internet. You can readily obtain both latex tubing and silicone tubing from companies that supply laboratory equipment. In the USA, examples of such companies include VWR, Fisher Scientific, and Cole-Parmer. I don't know for certain if any of these companies have global operations extending to Europe, but a quick search on the internet should answer that question. If not, then how would you identify a European equivalent? I'd suggest that you conduct a search on the internet for the keywords "silicone tubing." Even easier than that, why not visit the Dow-Corning website? Dow-Corning is a manufacturer of silicone tubing. You should be able to locate the distributors for your region at their website. This is how I found the three distributors mentioned above. Of those three, I found that VWR has the lowest prices and widest selection.

A slight inconvenience is that fact that a minimum order from one of these companies is a 50 foot reel of tubing. For the size of tubing you'll probably want, the cost is about $50 US, and upwards. The best deal I found was Dow Corning "Silastic" tubing (registered tradename) from VWR. I have a reel of Silastic tubing on order from VWR, and expect delivery within a few days. The tubing that I selected is Dow-Corning part no. 515-013 (VWR no. 62999-406). The dimensions are 3/16" ID x 5/16" OD with a wall thickness of 1/16."
I'm guessing that this tubing should be suitable for both ROP designs found at Tom Hubbards Penis Workshop (http://www.tomsnewsite.thundersplace.com/sperm.htm). A variety of other tubing dimensions are available, however, if you should happen to favor a different size.

In the long run, silicone tubing might be a better choice than latex. Latex rubber oxidizes and weakens over time, exactly like a rubber band. Also, some people are allergic to latex (reaction to foreign proteins imbedded in the natural plant rubber). Once the tubing arrives and I can verify that it is indeed suitable, I plan to post an announcement at MOS offering to provide tubing at cost plus shipping to MOS members in the USA, while the supply lasts. I'd be glad to send a sample on the same terms to you, but dealing with foreign currencies is troublesome. So, I'd like to offer you a free 30 cm sample - my treat. If that seems too generous, then perhaps we can work out some kind of trade: a sample of Gefilte fish in exhange the Silastic tubing, for example. Just kidding... How about a "thank you" postcard featuring a photo of a beautiful Swedish babe?

Cheers,

smiley
 
I had problems with the latex slipping off. I tried superglue and marine goop, neither worked for long as the latex stretches out(as someone else mentioned). Now I have the latex superglued and am more careful about putting it on. I slide it over my cock and slowly slip one ball in at a time. Don't stretch the latex at all. A little uncomfortable to put on but I have not had latex slip off since doing this. Trust me, try it.
 
I just bought 10 ft of latex tubing from home depot for under $20.00. Now Im set for awhile. If it starts to fall off just cut a new piece. Home depot sells it in the plumbing section by the sinks and such.
 
cyinisis said:
My home depot stopped carrying heroin tubing :(.

CYiNiSiS

Serious, Hell I'll send ya some man!

Im sooo excited bout this new tubing lol havent worn my ROP for like 2 months, started to wear it again last week but kept coming off now I dont gotta worry.

Send me ur address and such and I'll send you like 5ft.

Kausion_420
 
smiley said:
swedeguy,

I looked into this issue recently, as I happen to be collecting the materials for making my own ROP. I searched briefly in my local area for some latex tubing, but ultimately resorted to a search on the internet. You can readily obtain both latex tubing and silicone tubing from companies that supply laboratory equipment. In the USA, examples of such companies include VWR, Fisher Scientific, and Cole-Parmer. I don't know for certain if any of these companies have global operations extending to Europe, but a quick search on the internet should answer that question. If not, then how would you identify a European equivalent? I'd suggest that you conduct a search on the internet for the keywords "silicone tubing." Even easier than that, why not visit the Dow-Corning website? Dow-Corning is a manufacturer of silicone tubing. You should be able to locate the distributors for your region at their website. This is how I found the three distributors mentioned above. Of those three, I found that VWR has the lowest prices and widest selection.

A slight inconvenience is that fact that a minimum order from one of these companies is a 50 foot reel of tubing. For the size of tubing you'll probably want, the cost is about $50 US, and upwards. The best deal I found was Dow Corning "Silastic" tubing (registered tradename) from VWR. I have a reel of Silastic tubing on order from VWR, and expect delivery within a few days. The tubing that I selected is Dow-Corning part no. 515-013 (VWR no. 62999-406). The dimensions are 3/16" ID x 5/16" OD with a wall thickness of 1/16."
I'm guessing that this tubing should be suitable for both ROP designs found at Tom Hubbards Penis Workshop (http://www.tomsnewsite.thundersplace.com/sperm.htm). A variety of other tubing dimensions are available, however, if you should happen to favor a different size.

In the long run, silicone tubing might be a better choice than latex. Latex rubber oxidizes and weakens over time, exactly like a rubber band. Also, some people are allergic to latex (reaction to foreign proteins imbedded in the natural plant rubber). Once the tubing arrives and I can verify that it is indeed suitable, I plan to post an announcement at MOS offering to provide tubing at cost plus shipping to MOS members in the USA, while the supply lasts. I'd be glad to send a sample on the same terms to you, but dealing with foreign currencies is troublesome. So, I'd like to offer you a free 30 cm sample - my treat. If that seems too generous, then perhaps we can work out some kind of trade: a sample of Gefilte fish in exhange the Silastic tubing, for example. Just kidding... How about a "thank you" postcard featuring a photo of a beautiful Swedish babe?

Cheers,

smiley

lol How could I resist this? I guess the only trouble for me would be to find a postcard with a Swedish babe on it!

Edit:

Oh, and I don't know what gefilte fish is but we have something that's called "surströmming" here in Sweden, which would be directly translated into "sour fish" or "sour herring". Basically it's fish that's been fermenting in barrels for about 8 weeks. These barrels are often put in direct sunlight...

I can tell you that it smells like FART and tastes even worse. :D
 
Last edited:
Kausion,

or anyone for that matter, whose got extra latex tubing for their rop and would like to send me some? I'm thinkin like 3-4 ft max because i really dont need the ten feet they sell online. After bout seven months with the tubes supra sent i'm in need of some new ones. anyone who can help me out pm me!!
 
Back
Top Bottom