I just got the PeniMaster Pro and am finding it impossible to put it on. Have looked over their site, watched their videos, and read the manual, etc., but for whatever reason, I can't get my head to slide into the head attachment chamber. Any tips out there on how to put the PeniMaster on easily? Thanks.
Putting on the PeniMaster Pro
Sezuki;510562 said:
1 lube the sleeves pieces with finger applying all parts that will come in contact with the head and shaft.
2 squeeze the ball but not fully then put it on the male receiver push then turn to the right then squeeze out air making the sleeves ballon out, press penis head to sleeves. then release ballon causing suction. this will only pull in slightly so push while it is being sucked in.
3 once the ballon is fully expanded turn left then squeeze ballon totally, then push back on and turn right then release causing vacuum push head in (pushing head in is important) and it will slowly get sucked in. if need repeat the turn left slight lightly pull ballon off squeeze agin then push back on and turn right. release ballon to cause suction but you shouldn't need all the suction at this point.
4 then remove ballon and wait 10-30 second to allow head to expand in the head piece an then apply tension.
I hope that will help some people i found it pretty straight forward but i have been dealing with these contraptions for years so maybe thats why it seemed easy to me.
- Joined
- Mar 25, 2012
- Messages
- 154
Jaronimo;513952 said:
There is a work-around/substitute;
http://www.pegym.com/forums/groups/penimaster-pro-d576-latex-baloon.html
I have used this as a substitute for the stock diaphragms, which for me are a tad too tight for my "size". As long as one pressurizes the diaphragm outward before mounting, as recommended by Penimaster, it all works very good.
Because the Balloon latex is not as tight, more pliable, it needs less vacuum to start pulling in the Glans.
Todays Balloon color is Yellow, lol....
- Joined
- Dec 23, 2010
- Messages
- 112
Yep totally agree. Granted this is my first day actually putting it on, the hose adapter is so much easierJaronimo;513910 said:
Hopefully this also may help those who just have the ball as I have both but use the ball most of the time.
I found once you start suction to the glands and glands slow down or stop tilt the glands chamber slightly down I noticed this allows the glands to be suck in more. You can also add some inward pressure to the chamber.
Hope that helps some of the guys out there.
I found once you start suction to the glands and glands slow down or stop tilt the glands chamber slightly down I noticed this allows the glands to be suck in more. You can also add some inward pressure to the chamber.
Hope that helps some of the guys out there.
I know this is an old thread, but I wanted to say for anyone who doesn't know that you don't have to use the diaphragm. All that I use is a 12 inch balloon for a sluice, no diaphragm. I use a very very small amount of astroglide, use the ball to suck me in, then I remove the ball and release most of the vacuum. I never slip out. I don't get blisters or swelling or anything.
I must note, however, that I do not use the extender. I only use the belt from the vlc tugger that I bought some years back but never used. I keep my unit pretty tight, and I use the hip method. Because I've been wearing this for so long, I'm experienced in the different feelings of wearing this device.
With that said, it's not uncommon for me to wear the pmp head piece for 8 hours straight without checking on it. Not even to pee. I know that sounds weird to go 8 hours without urinating, but I'm a truck driver, and some days I can just drive and drive and not have to stop to pee.
I hope this helps someone.
Regards
I must note, however, that I do not use the extender. I only use the belt from the vlc tugger that I bought some years back but never used. I keep my unit pretty tight, and I use the hip method. Because I've been wearing this for so long, I'm experienced in the different feelings of wearing this device.
With that said, it's not uncommon for me to wear the pmp head piece for 8 hours straight without checking on it. Not even to pee. I know that sounds weird to go 8 hours without urinating, but I'm a truck driver, and some days I can just drive and drive and not have to stop to pee.
I hope this helps someone.
Regards
- Joined
- Feb 3, 2009
- Messages
- 356
I'd like to add, if you don't have the hose there's no need to order the one from PMP, you can just unscrew the end piece and use latex tubing available from a hardware store, or an exercise band available from a sporting goods store. Just put the tubing over the nipple and suck yourself in, then plug the tube with something (I use a small wooden dowel rod that I tapered down on one end with a blade).
- Joined
- Nov 25, 2012
- Messages
- 3
can anyone make a video on this?? Im still having trouble to fit it in!!
- Joined
- Jun 1, 2009
- Messages
- 1,479
Did you watch the videos on their site?
Video instructions: applying PeniMasterPRO to the penis with pump ball
Video instructions: applying PeniMasterPRO to the penis with pump ball
- Joined
- Nov 25, 2012
- Messages
- 3
yes, I did. They do it with so much ease, its impressive, I cant do it here in my room! I thought anyone could do a homemade instructional video for me...
- Joined
- Jul 4, 2014
- Messages
- 169
GreenSteel;614691 said:
Maybe I will shoot one and post it up in my thread but sometime I still have the slippage issue.
Similar threads
- Sticky