Egghead1

0
Registered
Joined
Jul 27, 2004
Messages
437
So I originally modded my Bathmate with a 2.75 inch cutout section of a smaller air pump I used to own to stop my testicles from slipping in. It worked amazingly well since it was the perfect diameter. The other day I decided to cut that modded section down to only 1.25 inches thick. During my next warmup pumping session one of my testicles quickly slipped up into the pump and I really wish I could convey the amount of pain I felt to you guys. I actually screamed as loud as I could and felt paralyzed for half a second LMAO.

I have a really thin fat pad and no matter what you guys have suggested, it never worked for me at all! Anyhow im hoping this Bathmate cushion ring works well. If it doesn't create a tight seal BUT stops me from loosing my balls I'm pretty sure I can mod it to be adequate. I will let you guys know how it goes sometimes this week since I haven't seen people talk about this directly.
 
I have been looking at getting one of those but could not find any info on how well it worked. I will be really interested in hearing your review on this Egg. I had a testicle get sucked in with an air pump so I know what you mean, I could not move fast enough to get it out, luckily no one was around to hear the girl scream, lol
 
Lookn4girth;745303 said:
I have been looking at getting one of those but could not find any info on how well it worked. I will be really interested in hearing your review on this Egg. I had a testicle get sucked in with an air pump so I know what you mean, I could not move fast enough to get it out, luckily no one was around to hear the girl scream, lol

The bathmate cushion ring works very well at preventing 'ball suckage'. And depending on your girth, it becomes a cockring of sorts when you get a good pump going. Just get it lined up real well before applying vacuum and you're good to go. Tip: For best results make sure you're trimmed well and I highly recommend you use some coconut oil or vaseline between the cushion ring and the comfort ring.
 
Randolpho;745304 said:
The bathmate cushion ring works very well at preventing 'ball suckage'. And depending on your girth, it becomes a cockring of sorts when you get a good pump going. Just get it lined up real well before applying vacuum and you're good to go. Tip: For best results make sure you're trimmed well and I highly recommend you use some coconut oil or vaseline between the cushion ring and the comfort ring.

You are the man Randolpho, that is the kind of positive review I was hoping to hear
 
Randolpho;745304 said:
The bathmate cushion ring works very well at preventing 'ball suckage'. And depending on your girth, it becomes a cockring of sorts when you get a good pump going. Just get it lined up real well before applying vacuum and you're good to go. Tip: For best results make sure you're trimmed well and I highly recommend you use some coconut oil or vaseline between the cushion ring and the comfort ring.
Nice work brother on finding this! Glad that is worked out for you. I've seen the pads your talking about at the sex shop up the street. I almost bought it to try it out.
 
Randolpho;745304 said:
The bathmate cushion ring works very well at preventing 'ball suckage'. And depending on your girth, it becomes a cockring of sorts when you get a good pump going. Just get it lined up real well before applying vacuum and you're good to go. Tip: For best results make sure you're trimmed well and I highly recommend you use some coconut oil or vaseline between the cushion ring and the comfort ring.

Does the cushion ring have to be used with the comfort pad or can it be used without it. The reason I asked is because I took the comfort pad off within a week of using the BM
 
Mike3209;745514 said:
I recently just took off the comfort pad and oh man I like it much more!

It does make a big difference. I am thinking of getting one of the cushion rings to see how it works out. If I could keep the balls from wanting to suck in that would be paradise. I have not been brave enough to put it all in the tube like BSA and a few others do
 
Lookn4girth;745513 said:
Does the cushion ring have to be used with the comfort pad or can it be used without it. The reason I asked is because I took the comfort pad off within a week of using the BM

Absolutely not. You'll get an even better seal without the comfort pad insert. And you'll experience no more uncomfortable gaiter bite or annoying impressions around the base. The only down side is you won't get that lift from the comfort pad insert to help keep your erection angle above horizontal if you're using it in the shower without a strap. But the vacuum is so good that it will still stay put at the lower angle. I like to use this weight as an exercise. Do sets of kegels and raise the tube above horizontal. Feels great.
 
Randolpho;745791 said:
Absolutely not. You'll get an even better seal without the comfort pad insert. And you'll experience no more uncomfortable gaiter bite or annoying impressions around the base. The only down side is you won't get that lift from the comfort pad insert to help keep your erection angle above horizontal if you're using it in the shower without a strap. But the vacuum is so good that it will still stay put at the lower angle. I like to use this weight as an exercise. Do sets of kegels and raise the tube above horizontal. Feels great.

Thanks for the info. I need to go ahead and order me one. I do the same with my BM using the weight and doing kegels to lift the tube.
 
Good Stuff! Comfort will bring more usage and yield better results.
 
Lookn4girth;745520 said:
It does make a big difference. I am thinking of getting one of the cushion rings to see how it works out. If I could keep the balls from wanting to suck in that would be paradise. I have not been brave enough to put it all in the tube like BSA and a few others do

Did BSA mentioned it anywhere that he is putting is testicles inside the bathmate too? If yes, I will like to give this a try because I really want to include the bathmate hardcore stretches into my routine.
 
These cushion rings came in the mail and I've been trying to use them in every combination possible. I dont like them at all, they are too squishy and get sucked into my bathmate while im pumping (sometimes half of it or almost all of it). its like a hard sponge material that deforms too easily for me. Keep in mind that i pump sitting down with my legs open and these might be better standing up? Or i could just have a unique body type. Ive gained a bit more length which could be responsible for my testicles hanging higher? My testciles do hang REALLY high to be honest. I plan on changing that but one thing at a time.... I dont know why these rings dont work with me but what what I do know is Ive got to find my own DIY mod to make this work like 85% of all the PE equipment out there. I had a mod that worked and changed it so i know where to start. I'm off to home depot
 
huge-girth;746354 said:
Did BSA mentioned it anywhere that he is putting is testicles inside the bathmate too? If yes, I will like to give this a try because I really want to include the bathmate hardcore stretches into my routine.

That's how I do all my BM pumping...go slowly tho
 
Big Schwanz Acht;746366 said:
That's how I do all my BM pumping...go slowly tho

I'm with you on this one. I will surely give it a try.
 
Egghed;746361 said:
These cushion rings came in the mail and I've been trying to use them in every combination possible. I dont like them at all, they are too squishy and get sucked into my bathmate while im pumping (sometimes half of it or almost all of it). its like a hard sponge material that deforms too easily for me. Keep in mind that i pump sitting down with my legs open and these might be better standing up? Or i could just have a unique body type. Ive gained a bit more length which could be responsible for my testicles hanging higher? My testciles do hang REALLY high to be honest. I plan on changing that but one thing at a time.... I dont know why these rings dont work with me but what what I do know is Ive got to find my own DIY mod to make this work like 85% of all the PE equipment out there. I had a mod that worked and changed it so i know where to start. I'm off to home depot

I thought the cushion rings went on the inside of the BM right at the opening. If they sit outside that would make them almost the same as the so called comfort ring wouldn't it, maybe a little softer
 
Back
Top Bottom