Joined
Nov 10, 2003
Messages
356
Likes
0
|
"Pressure on the head"
#1
Hi guys. I really want to make some length gains, and I do have a Bib , but I just can't seem to hang any appreciable weight without the hanger slipping forward and exerting tremendous pressure on the head. I've had my bib for well over a year. I've tried every type of wrap I can think of. I've tried sports wrap with theraband on top. I've tried toe in, toe out, toe everywhere. I just can't seem to stop the slippage forward. I've tried wrapping flacid, semi-erect and fully erect. The best result in when close to erect ( I do let the erection subside somewhat before applying the weight). But when doing it that way, what works best is attaching the hanger close to my body. Problem is that with this configuration, you can't do fulcrum hangs because there's no room left. I'm uncut and so I'm sure this is related to the slipping problem. Anybody have some advice. I've got the time and the drive, just can't seem to get it right. Thanks much.
 
Joined
Jun 3, 2003
Messages
831
Likes
2
|
"Pressure on the head"
#2
Welcome to the forum dude. What angle are you trying to hang at? BTC or at the higher angles? Wrapping and attachments are different for different type os hanging .
 
Joined
Nov 10, 2003
Messages
356
Likes
0
|
"Pressure on the head"
#3
Thanks for the welcome C-Guy. As to your question, well, I hang, or try to hang, from all angles. I was unaware that the wrapping would be different for each. How so? Perhaps you could explain. Much appreciated.

Fillerup
 
Joined
Jun 3, 2003
Messages
831
Likes
2
|
"Pressure on the head"
#4
When I was hanging BTC the wrapping was pretty standard like starting about 1/2 inch behind the head and covering enough of the shaft to accomodate the hanger . Since I changed to other angles wrapping and attaching in that manner does not work. The head gets purple and cold. I need some more info from you. What is your flacid wrapped girth. ANd what hanger are you using regular or starter? What setting do you have the hex nuts at now? Get back to me and we'll help you figure this out.
 
Joined
Nov 10, 2003
Messages
356
Likes
0
|
"Pressure on the head"
#5
Ok, I'll try and answer those questions. First, it's a regular bib , not the starter. Flacid wrapped girth is about 14 cm. That's with one wrap of elastic athletic wrap and one wrap of thereband. I should note though that I do not have much success wrapping flaccid. Mostly I guess because I'm uncut and trying to wrap and pull back foreskin at the same time is quite a feat of dexterity. And even if I am somewhat successful, the hanger just ends up slipping forward. My best luck is wrapping semi-erect from the base downwards. I can hold the foreskin back at the base and get a good wrap there and work down. Then the hanger is attached mid-shaft and seems to hold, at least for a while, sometimes a few minutes, sometimes a full 10-15 minutes. It's never consistent. And sometimes skin gets pinched, which of course hurts like a SOB. As for the hex nuts, the nut closest to the head when attached is about 1/2 inch space between the inner lock nuts and the rear one (closer to the penis base) is a little wider. When I wrap semi-erect, I only use the elastic wrap , but this morning I tried it with the elastic wrap and then the thereband on top and it worked better. Held 10 lbs with no problem but the hanger is positioned high up on the shaft. It's definitely pulling on the ligs but I always thought it should be lower down, but for me, lower down=slippage. Hope this provindes you with some info. I appreciate your trying to help. I've got Bigger himself working on this, as I've had this hanger for over a year and have been unable to solve this slippage problem. I fantasize about hanging 20 lbs with this baby and no slippage, no pain. Hopefully soon. Thanks again?:(
 
S

stillwantmore

Guest
|
"Pressure on the head"
#6
Full size bib ...yet another man besides myself who has had problems with this version of the hanger fitting. The Starter model fit me perfectly....it works better for guys with flaccid girths UNDER 6". The full size is much better for guys with flaccid girths of 6"++. I plan to get back into hanging and with a full sized Bib once I hit my girth goal.
 
Joined
Jun 3, 2003
Messages
831
Likes
2
|
"Pressure on the head"
#7
OK please forgive my feeble brain. I need to ask another question. When you attach the hanger and tighten it up. Where are the teeth? DO they mesh? Or, is there a gap between them? They should mesh together a little, but NOT completely. WHen the hanger starts to slip you could try to tighten a little more then.

When I was hanging BTC (or straight down) i did not have a problem. I could hang 20 pounds for 2 hours broken into sets of course. Currently I am trying to hangat upper levels and as you I am finding it a challenge. I am sending you a pm with another suggestion. We WILL conquer this man....do not get discouraged.
 
Joined
Nov 10, 2003
Messages
356
Likes
0
|
"Pressure on the head"
#8
Thanks for the reply C-guy. When I used the hanger , often the teeth were quite far apart. I've been talking to Bigger and he agrees with you, the teeth should mesh with just a little room left for tightening. I've had to rod out the hex nuts to accomodate. Guess I had more girth than I thought :) But it seems to be helping. I did 2 hang sessions with 10 pounds today and it didn't slip, or at least not much. At least I'm working in the ball park now. You said you were sending me a PM. I'm not sure what you mean by that. But any further suggestions are most welcome. By the way, do you go along with the "lot" theory that I've read about on thunder's site? I'm not sure how to determine one's lot, but from my understanding it's by pulling the penis out at a given angle then, while maintaining the stretch , doing a strong kegel. The penis should "pull back" with the kegel. The angle with the least "pull back" is where your lot is and that is supposedly the angle where you should be hanging . But I tried this in all kinds of directions and had no pull back in any of them. So I don't know what to make of that. Anyway, I want to make this work, so I'll listen to anything you or any of the members have to offer. Can't thank you all enough.

fillerup
 

Members online

Top Bottom