Phallosan while sleeping?

eugine8plz · Dec 6, 2016

Hey bros,

Just wondering if any of you guys use the phallosan forte while you sleep. How is it? what does your set up for over night look like? how did you guys ease into using it all night. I am not going to have a whole lot of time to use it during the day so i want to start using it at night time when i order and get my phallosan forte.

Thanks bros!!

smitty2590 · Dec 7, 2016

Hey man I will try and make this not a bunch of run ons but I'm on a cellphone so here goes.1the most important thing is to replace the condoms with silacone sleeves immediately, not just for comfort but also for maintaining pressure. 2 to train yourself I cannot stress this enough slow and steady your first week no more then 1-2 hours daily then slowing increase it over a month. Now for night time sleeping I suggest wearing just the bell for a few nights no tention to see how you hold up to the pressure for this amount of time and to make sure you do not develop blisters. Finally for my set up, I hook my pf up to the belt that comes with t and I used to just hook the foam ring around my foot but learned that your feet move a lot during the night so now I just hook the foam ring up to the baseboard on my head with a strap I've rigged it so it stays in place and then I hook up to the bell and have astraight downwadd stretch. Can move easily it will take getting use to because you have to sleep on your back but you do when pulling to the sides also plus this way you prevent ring burn and chafing the bottom of your shaft. Again though this is not something to think you can do in your first week or really even in your first month. Safety is everything

eugine8plz · Dec 7, 2016

smitty2590;717088 said:
Hey man I will try and make this not a bunch of run ons but I'm on a cellphone so here goes.1the most important thing is to replace the condoms with silacone sleeves immediately, not just for comfort but also for maintaining pressure. 2 to train yourself I cannot stress this enough slow and steady your first week no more then 1-2 hours daily then slowing increase it over a month. Now for night time sleeping I suggest wearing just the bell for a few nights no tention to see how you hold up to the pressure for this amount of time and to make sure you do not develop blisters. Finally for my set up, I hook my pf up to the belt that comes with t and I used to just hook the foam ring around my foot but learned that your feet move a lot during the night so now I just hook the foam ring up to the baseboard on my head with a strap I've rigged it so it stays in place and then I hook up to the bell and have astraight downwadd stretch. Can move easily it will take getting use to because you have to sleep on your back but you do when pulling to the sides also plus this way you prevent ring burn and chafing the bottom of your shaft. Again though this is not something to think you can do in your first week or really even in your first month. Safety is everything

Thanks for the reply bro! And ya I really want a silicone sleeve but don't know where to get one for cheap, cause if I order the phallosan I am not gonna be able to order a sleeve for awhile cause I will already need to pay of the phallosan and when you are a full time college student that only works weekends and needs to pay for school, insurance and phone bill you don't have a lot of spare money lol

I'm from Canada so the phallosan is about $500 CAD which is quite a bit of cash to spend, so are there any cheap silicone sleeves I can use or even make??? And ya I have a PMP so I am thinking about using the belt from that set (PMP is good but the diaphragms break waaaaaaaay too easily for me so I gave up on it, I broke a diaphragm every couple days). But ya this is a great and very progressive program you set up for me here thank you very much!!! I am going to order it tomorrow hopefully and hopefully get it within a week or so!

Do you like your phallosan a lot? What kind of gains have you made with it? What tension do you use? Thanks bro!

smitty2590 · Dec 7, 2016

I'm only about 2 months in pf usage I completely finished a beginner program jp90 beforetryinf it at all but so far I am measuring a little over 1/2" total gain in el nothing in girth. I would suggest lg hangers sleeves they will costyou 28 US dollars plus like 8 bucks shipping and I know that sounds a little expensive but you can make 2 sleeves for sure maybe 3 out what they send you and they will last you years. I've tried many different sleeves and these are what I prefer out of everything so far. If you pm me all your current stats I can tell you which of their sleeves to purchase also as I have all 3 different sizes and can pretty accurately tell you which you need for your girth. As far as using the pmp belt you can esp during the day to pull downward I do this sometimes with a leg stap during the. Ight there are many things to try it's all about finding what works for you.

DLD · Dec 7, 2016

A few Brothers have been using for overnight stretching with great success. The best way top approach this is using alarms. The first night go for 2 hours and check if things are straight. The next night add another hour and do this until you reach your maximum sleeping time. This will allow you to make adjustments in intensity and position that best suits you.

truant · Dec 8, 2016

The advice in this thread is spot on. Over last few days I made strides with the phallosan forte and size genetics combo.

The way I protect my glands from blisters is using simple cotton cloth that I bought from a fabric store. I bought a big roll of natural cotton sheet and I cut small pieces out of it and simply put it over my glands before entering the largest PF suction bell.

I like this method the best because your glands fill the whole bell and it gives good grip while also protecting all of your skin on your glands not just the tip. By using this method I saw an increase in tension.

I use a firm red sleeve from auto extender because they are tougher than the soft sleeves in that you can clean them with boiled water and they don't tear like the soft sleeves and so they will last longer.

If your wondering how I used the PF with the size genetics extender, it's simple. I take the PF tension clip (the thing with the colors showing tension green,yellow,red) and I tape it onto the size genetics rod plate (the white plate that slides over SG rods) this way I can simply grab the combined tension clip and plate over the SG rods easily and see what tension I'm at. Right now I'm in yellow and get a great internal stretch.

To aid in comfort at the size genetics base. I simply cut a piece of the phallosan forte foam ring and split it down the middle so it goes over the SG base then I tape it with medical tape so it stays in place. Hope this helped. Happy gains

MandingoBro · Dec 8, 2016

It was hard to sleep with PF for the first few nights. But with time, you will adjust to it. I have mine tension set it to yellow. I would recommend you to start out slow and have a little tension where you can feel a little stretch there. Once you are comfortable in that state then increase the tension. The main point is to key your unit extended and prevent it from turtling.

DLD · Dec 9, 2016

truant;717324 said:
The advice in this thread is spot on. Over last few days I made strides with the phallosan forte and size genetics combo.

The way I protect my glands from blisters is using simple cotton cloth that I bought from a fabric store. I bought a big roll of natural cotton sheet and I cut small pieces out of it and simply put it over my glands before entering the largest PF suction bell.

I like this method the best because your glands fill the whole bell and it gives good grip while also protecting all of your skin on your glands not just the tip. By using this method I saw an increase in tension.

I use a firm red sleeve from auto extender because they are tougher than the soft sleeves in that you can clean them with boiled water and they don't tear like the soft sleeves and so they will last longer.

If your wondering how I used the PF with the size genetics extender, it's simple. I take the PF tension clip (the thing with the colors showing tension green,yellow,red) and I tape it onto the size genetics rod plate (the white plate that slides over SG rods) this way I can simply grab the combined tension clip and plate over the SG rods easily and see what tension I'm at. Right now I'm in yellow and get a great internal stretch.

To aid in comfort at the size genetics base. I simply cut a piece of the phallosan forte foam ring and split it down the middle so it goes over the SG base then I tape it with medical tape so it stays in place. Hope this helped. Happy gains

The PhalloGenetics!

smitty2590 · Dec 9, 2016

I'm hoping to eventually either win a monthly prize and get the sg or save up to buy one and make this mod so I can pg during the day then normal pf when I'm using at night time. I actually have a better idea on how to apply the pf to the sg cradle though get a small keychain clasp similar to this https://www.google.com/search?q=sma...AUICCgC&biw=375&bih=559#imgrc=gnX6tZQAWBO10M: and run a zip tie though the loop hole then through the hole on the cradle the silacone tubeswould normally go through and zip toe it permanently to the cradle. Once this is done you can just open the clasp and connect it to the tention clip on the pf. Again this is just my idea as I do. Or have a sg to test it but I used to own a cheep known off years ago and it seems like that would have worked easy enough.

truant · Dec 9, 2016

smitty2590;717479 said:
I'm hoping to eventually either win a monthly prize and get the sg or save up to buy one and make this mod so I can pg during the day then normal pf when I'm using at night time. I actually have a better idea on how to apply the pf to the sg cradle though get a small keychain clasp similar to this https://www.google.com/search?q=sma...AUICCgC&biw=375&bih=559#imgrc=gnX6tZQAWBO10M: and run a zip tie though the loop hole then through the hole on the cradle the silacone tubeswould normally go through and zip toe it permanently to the cradle. Once this is done you can just open the clasp and connect it to the tention clip on the pf. Again this is just my idea as I do. Or have a sg to test it but I used to own a cheep known off years ago and it seems like that would have worked easy enough.

I prefer the phallo genetics combo over the penis master pro and size genetics combo because I don't like the lubricants you have to use with the PMP. Although the PMP is good if you for whatever reason can't wear the sleeves and only want the head gripped.

Smitty I was trying to think of something similar to your idea so thanks I will try it. The tape works but I would like it to be cleaner and it seams like I have to add more bars than I should. I have 2 big bars on and I can just barely get the SG cradle over on the bars and I end up in yellow tension.

Another thing is I don't really like the red hard sleeves from auto extender with the phallosan. The soft white sleeves broke but the hard sleeves are a bit too hard and pushes my glands out of the bell and it's hard to get back in. I'm going to try and cut the hard sleeve shorter and see if that helps. If not then I'm going to order the medium sleeves which I haven't tried yet.

smitty2590 · Dec 9, 2016

truant;717480 said:
I prefer the phallo genetics combo over the penis master pro and size genetics combo because I don't like the lubricants you have to use with the PMP. Although the PMP is good if you for whatever reason can't wear the sleeves and only want the head gripped.

Smitty I was trying to think of something similar to your idea so thanks I will try it. The tape works but I would like it to be cleaner and it seams like I have to add more bars than I should. I have 2 big bars on and I can just barely get the SG cradle over on the bars and I end up in yellow tension.

Another thing is I don't really like the red hard sleeves from auto extender with the phallosan. The soft white sleeves broke but the hard sleeves are a bit too hard and pushes my glands out of the bell and it's hard to get back in. I'm going to try and cut the hard sleeve shorter and see if that helps. If not then I'm going to order the medium sleeves which I haven't tried yet.

I suggest lg hanger sleeves to everyone because I use a lot of sleeves and with the pf I feel they are best ofboth worlds they are hard yet soft I love them but just my opinion.

truant · Dec 9, 2016

smitty2590;717489 said:
I suggest lg hanger sleeves to everyone because I use a lot of sleeves and with the pf I feel they are best ofboth worlds they are hard yet soft I love them but just my opinion.

I looked at the LG hanger sleeves. It's $28 for for one sleeve. Auto extender has 2 for 20 and the medium sleeves may be just as good.

smitty2590 · Dec 9, 2016

truant;717492 said:
I looked at the LG hanger sleeves. It's $28 for for one sleeve. Auto extender has 2 for 20 and the medium sleeves may be just as good.

May be, I know cost is always a factor but customer service is a big deal to me also and lg is s small family owned business in thr states. Marlon and his wife have cut backflips anytime I've asked anything of them. Also 1 good sleeve will last you for years and depending on your size you'll get multiple sleeves from the one the send by cutting. Again I just like to promote products I believe in and know the business stands by and I've had nothing g but good luck and service with them I've used some from ae and also from ab but they did not work the same for me. Everyone is different and perfers different. Hope this helps you out

DLD · Dec 12, 2016

I can't wait for our sleeves to be done, we will drop the price and give a much better product.

smitty2590 · Dec 12, 2016

doublelongdaddy;717716 said:
I can't wait for our sleeves to be done, we will drop the price and give a much better product.

I can't wait and sure hope so dld. Are me and eugine still going to be the two testing the sleeve when they are finished? I truly would love to give some input and try them out I know exactly what I'm looking for and a lot of others would be in a sleeve ESP for using with clamping, and pf useage. Was just curious because I was never contacted by lightning although eugine did tell me it's been pushed back a bit.

DLD · Dec 13, 2016

smitty2590;717781 said:
I can't wait and sure hope so dld. Are me and eugine still going to be the two testing the sleeve when they are finished? I truly would love to give some input and try them out I know exactly what I'm looking for and a lot of others would be in a sleeve ESP for using with clamping, and pf useage. Was just curious because I was never contacted by lightning although eugine did tell me it's been pushed back a bit.

Yes, you will be testing them. LIGHTNING said He was waiting on some other samples and He would get them out as soon as He reviewed them. Have patience they are coming and when ready you will be contacted.

smitty2590 · Dec 13, 2016

doublelongdaddy;717818 said:
Yes, you will be testing them. LIGHTNING said He was waiting on some other samples and He would get them out as soon as He reviewed them. Have patience they are coming and when ready you will be contacted.

Awesome thanks for the reply. Patience is the hard part haha but it's all good I have what I need for now was just making sure. A dedicated man can never have to many pe items on hand though and better sleeves are always a plus for so many different applications.

DLD · Dec 14, 2016

smitty2590;717876 said:
Awesome thanks for the reply. Patience is the hard part haha but it's all good I have what I need for now was just making sure. A dedicated man can never have to many pe items on hand though and better sleeves are always a plus for so many different applications.

I know, I feel the same way! So many new things are coming into Lightning right now that He is having trouble juggling it all. Hopefully the dust will settle soon and we can get some testing done.

kyomoto · Dec 14, 2016

doublelongdaddy;717967 said:
I know, I feel the same way! So many new things are coming into Lightning right now that He is having trouble juggling it all. Hopefully the dust will settle soon and we can get some testing done.

All good, we're patient we can wait for the best MOS technologies.

DLD · Dec 15, 2016

kyomoto;718005 said:
All good, we're patient we can wait for the best MOS technologies.

Patience is hard sometimes but it is worth the wait, LIGHTNING does nothing half-assed, He searches out the best and makes the deals happen.

Phallosan while sleeping?

0

0

0

0

doublelongdaddy

0

0

doublelongdaddy

0

0

0

0

0

doublelongdaddy

0

doublelongdaddy

0

doublelongdaddy

0

doublelongdaddy

Similar threads