LengthMaster Replacement Screws

e2274964

New member
Joined
Feb 14, 2013
Messages
13
Bought my LM about 3-4 years ago and just recently lost the long screws and the wingnuts to it. I haven't been able to use my PMs, I was wondering if anyone knew the lengths and diameters of both the screws and the wingnuts so I could Amazon Prime them?


Thanks in advance.
 

e2274964

New member
Joined
Feb 14, 2013
Messages
13
You can get them at any hardware store since they are very common. If you can’t let me know and I will send you another set.

Oh, I've had new screws for months now,


But a week ago the chamber piece broke (the piece that holds the rubber pads) and I was wondering if i could get a replacement of that part:

IMG_2210.JPG

it broke during a hanging session...the screw that holds the strap in place was pulled out by the amount of weight i was using and now the strap isn't attached to anything.

if it will cost $$$ to replace this specific piece i understand.
 

e2274964

New member
Joined
Feb 14, 2013
Messages
13
Hi e2274964,

I always like to read about members experiences with devices MOS recommends, but particularly the lengthmaster and power assist that DLD created himself.

How have gains been over the years using this?
What is the most amount of weight you used?
.
.
.
55lbs is the most weight i've used, i dont see a need to go beyond that really. 50lbs will deform, bend and reshape the penis like clay especially when bundled . i have a 50lbs Kettleball, and a 30pound one i bought off Amazon but i started hanging with 10lbs originally.

basically, my routines are intense enough to where i see new gains everyday. penis has no choice but to give me that given the bundling and the weight im using. i do 2-3 sessions (each 13-15 minutes) of Bundled Hanging everyday.

Bundled Hanging BTC w/ 50lbs
OR
Bundled Fulcrum Hanging w/ 50lbs (done @ edge of bed, power assist resting on legs)

Length Master 's power assist makes fulcrum hanging easy to the point you dont need a Rice Sock or anything. my Bundled Hanging routines were done with me standing up or walking around for the duration of the sessions. i didn't start sitting down and hanging until i started fulcrum hanging about a month ago.

also, Length Master makes the BTC angle possible STANDING UP because the Power Assist can rest behind your legs. now, due to the amount of weight i use i have to hold it up with both hands to prevent slippage but you are still getting 80-95% of the stretch even while holding it with both hands.

the Fulcrum Bundled Hanging (@ 50lbs) was the new territory i was breaking into before the strap /screw ripped itself out from underneath. like i said the combination of bundles and heavy weight will give you whatever gains you're tryng to get but you have to be adjusted to the pain.

as far as the BUNDLE ROTATIONS go.... i can work up to 4.5 bundles while being productive. I can push it to 5bundles but I can't hang @ five rotations because there's not enough dick left (flaccid) to keep the weight from sliding off. im 6.7-7.1in flaccid usually.

IMO you aren't serious about length gains if you don't have a Length Master ...it is the Swiss-Army-Knife for length gains. i've been beating up on mine for the past few years. all my screws are stripped, the paint is chipping and the wood is flexing but the gains can't be argued with.

on the flipside If you're pushing Length Master to its limits you're going to get some GIRTH out of it too so it's not just a "length " thing by any means. My bundle hanging gives me width as well, its just the amount of weight im using ensures i'll get longer more-so than i'll get wider/thicker.

i have some old pictures of my dick on Page 2 of the Picture Proof Forum back from 2016...they're very old and are from when I did BUNDLED STRETCHES without any weight. Im 9.8 FSL and 9.4-9.6BPL + 6.5in girth CURRENTLY. trying to get more tunica length gains via FULCRUM hanging 50lbs bundled because BTC isn't giving me big gains anymore.
 
Last edited:

DLD

doublelongdaddy
Staff member
Joined
Jun 3, 2003
Messages
109,468
Oh, I've had new screws for months now,


But a week ago the chamber piece broke (the piece that holds the rubber pads) and I was wondering if i could get a replacement of that part:

View attachment 1817107

it broke during a hanging session...the screw that holds the strap in place was pulled out by the amount of weight i was using and now the strap isn't attached to anything.

if it will cost $$$ to replace this specific piece i understand.
Please send your issue to guru.dld@gmail.com and I will handle it for you. Be sure to send name and mailing address
 

REDZULU2003

Its a marathon, not a sprint!
Staff member
Joined
Jun 3, 2003
Messages
22,018
.
.
.
55lbs is the most weight i've used, i dont see a need to go beyond that really. 50lbs will deform, bend and reshape the penis like clay especially when bundled . i have a 50lbs Kettleball, and a 30pound one i bought off Amazon but i started hanging with 10lbs originally.

basically, my routines are intense enough to where i see new gains everyday. penis has no choice but to give me that given the bundling and the weight im using. i do 2-3 sessions (each 13-15 minutes) of Bundled Hanging everyday.

Bundled Hanging BTC w/ 50lbs
OR
Bundled Fulcrum Hanging w/ 50lbs (done @ edge of bed, power assist resting on legs)

Length Master 's power assist makes fulcrum hanging easy to the point you dont need a Rice Sock or anything. my Bundled Hanging routines were done with me standing up or walking around for the duration of the sessions. i didn't start sitting down and hanging until i started fulcrum hanging about a month ago.

also, Length Master makes the BTC angle possible STANDING UP because the Power Assist can rest behind your legs. now, due to the amount of weight i use i have to hold it up with both hands to prevent slippage but you are still getting 80-95% of the stretch even while holding it with both hands.

the Fulcrum Bundled Hanging (@ 50lbs) was the new territory i was breaking into before the strap /screw ripped itself out from underneath. like i said the combination of bundles and heavy weight will give you whatever gains you're tryng to get but you have to be adjusted to the pain.

as far as the BUNDLE ROTATIONS go.... i can work up to 4.5 bundles while being productive. I can push it to 5bundles but I can't hang @ five rotations because there's not enough dick left (flaccid) to keep the weight from sliding off. im 6.7-7.1in flaccid usually.

IMO you aren't serious about length gains if you don't have a Length Master ...it is the Swiss-Army-Knife for length gains. i've been beating up on mine for the past few years. all my screws are stripped, the paint is chipping and the wood is flexing but the gains can't be argued with.

on the flipside If you're pushing Length Master to its limits you're going to get some GIRTH out of it too so it's not just a "length " thing by any means. My bundle hanging gives me width as well, its just the amount of weight im using ensures i'll get longer more-so than i'll get wider/thicker.

i have some old pictures of my dick on Page 2 of the Picture Proof Forum back from 2016...they're very old and are from when I did BUNDLED STRETCHES without any weight. Im 9.8 FSL and 9.4-9.6BPL + 6.5in girth CURRENTLY. trying to get more tunica length gains via FULCRUM hanging 50lbs bundled because BTC isn't giving me big gains anymore.

Thanks allot for this. Could you write a review in the lengthmaster section sometime when you have chance, aimed for new members with your honest opinions on the device.
 
Top