Kingdom of girth routine

Ok, so here it is, take what you will.

*Jurassic Crusher*

What you'll need- a clamp, a hard surface, and a Mason Jar (taped optional)

Basically, you want to start off by getting as hard as possible, and then clamping off like you would regularly.

After this you want to find a hard surface like a desk or something that is the right height.

Now what your going to use as a compression device is a Mason jar, either 32 oz or 16 oz depending on how long you are, i'm 7 BPEL and i use the 32 0z m/j, it's about 3 1/2 inches wide (you'll be using the side, not length wise, kind of making like a ''t'' shape with the jar and your dick, except the jar compresses in the middle of the shaft, not the top by the head!)
And if you feel uncomfortable with it, you can use duck tape, and tape all around the jar, but make sure its smooth.

Ok, so now that your all ready to go, this is how the actual exercise is preformed.

there are certain reason it is done this way which i will explain!

Start off by placing your dick on the hard surface, now take the jar and place it in the middle of the shaft width wise and start compression.
(You want to push hard, and it's going to feel intense, some of you wont be able to take it, you need to be conditioned for this!)
you want to hold each compression for 40-50 seconds, minimum 40 seconds! (important, because the longer you hold the better the expansion)
now once you've finished this rep, you take a small break 10- 20 seconds, then do another.
You do this a total of 4 times in a row!
It is important that you do it this way for this reason, what you'll noticed in your further sets, is that your dick starts to take on wider shape (creating width), this happens during the last two reps of the sets. what i mean by this is-
during your first and second rep (a rep is a 40 second squash) of a set,your clamped erection is very rigid (hard), but by the last 2 reps your shaft is more pliable, and when you squash it it gets wider, you'll notice this by the 3rd or 4th set because it will actually be wide even when your not squashing it.

So it's very important that you don't re-stimulate before the end of the set (4 reps)
Because if you stay rigid you wont get the chance to gain the width!!!
But should also know this, it's very important that you are rigid at for the first 2 reps of each set because, when you squash down and the shaft is really hard, what your actually doing is creating girth!!!
YOU SEE, this is why this exercise is insane, because it works girth better than any other girth exercise i've ever done, and it works width better than any other width exercise i've ever done!
SETS- I do from 3 to 5 sets (usually, about 25-30 min)

I'm not kidding you, i get 3/4'' in girth expansion from 5'' to 5 3/4'' and my width goes from 1.5 to 2.1!
And the craziest part is that, my dick is still fatter like 5 days later, no P.E.

This is all after a 25-30 min session, short and insanely powerful.

So to sum it all up-

-4 reps, each 40-50 seconds
- 3 sets
- The first 2 rep bring in massive girth (like the hardest squeeze you've ever felt)
- The second 2 reps bring in the massive width!!!!
- Push hard, HARD!!!

Warning-
-It will hurt at first, but you will get used to it
-DO NOT TRY THIS AS A NOOB
- You wont get an erection for a day or two after these, but then you will wake with a harder and fatter erection, even days later.
-After you get accustomed, you will be able to do them more regularly
-Im not telling anyone what to do with their body, it up to you, im just sharing what i have found to be a beneficial exercise!

HAVE FUN WATCHING YOUR DICK GET FATTER AND WIDER BEFORE YOUR EYES

Now that you understand the JC's, i will explain the other exercise.
basically what i do is super-set, between a set of JC's and ATS ROLLERS.

so after your first jc set, you'll re-stimulate, clamp off again and do 2-3min of ats rollz straight and thats an ats set.
you'll do
3 sets of each, starting with the jc's, a total of 6 sets and your done.
this is the single greatest routine ive ever come up with.
Be safe, enjoy.

But most of the width goes to the middle of the cock right? Can you post a picture after you did them so I know how I'm supposed to look like?

No man, the width pretty much makes its way across the entire shaft, and if your worried about it, every so often do a jc up the shaft a bit.

It definitely looks like to me that this would be even cooler than frendos good job! I don't know when I will test it because I'm still quite new

You should do a video. Also start some before pictures, measured and keep at this for a minimum of 90 days. Measuring along the way. 90 days is plenty of time to see results.

i am having results, i started six weeks ago, at 5" in girth, since my first week i havent gone below 5 1/4" and ive taken a week and a half break.
also, now after a few rest days, im between 5 1/4 and 5 1/2 like 5 3/8 or a little over i would say, plus i dont get any swelling while working out any more, and ive been making it to 6" lately, where as when i first started i could only get to 5 3/4 no matter what.

the problem im having is that with the new girth my wrap and clamp arent working properly anymore, i cant get the damn clamp shut tight enough anymore.
its messing up my sessions, and pissin me off!

Maybe you use too much wrap? Did you watch the video still made today? How many teeth are you leaving out to achieve optimum pressure btw?

ive been clamping for years i have it down.

Still, if you try it and like it make a video, i wont be, just not comfortable with it.

BTW how many teeth are you leaving on the clamps to achieve optimal pressure? I just like to ask everybody that so I can get insight on what works for others.

honestly its never a matter of teeth, because depending on how much girth you have, how erect, hôw much skin ect...
i clamp so that if i where to squeeze, practicly nothing wôuld come out.

If you squeeze the glans or the shaft? Because I can clamp of tightly as so the shaft stays rigid, but if squeezing the glans I always get some outflow is this normal?

your not wrapping properly

What do you use as wrap, and how many layers?

any soft material, and i can't tell you how much because, it all depends on your size, shape, ect.....

Read this..
http://www.mattersofsize.com/forum/...esel-and-shorty-mac-width-secret-exposed.html

It gives you variations and techniques for this exercise. Like using a pizza roller or clamping in between two pieces of tiles as well. Redzulu kept this exercise going for a long time. Definitely gives you width.

This exercise is just like that but more focused, and intense.

It's the same thing just different tool. You push it more if you use a small dough roller, vacuum cleaner tube or even the wooden handle from a toilet plunger lol. Gotta read that thread man. Gives you new ideas on old techniques like this one.

Squeezing between the toilet and toilet seat is the way DLD used to do it lol. Clean first haha.