If I have sent you a silicone sleeve to test, Please post your review.

bandit2010

0
Registered
Joined
Jan 20, 2015
Messages
952
If I have sent you a silicone sleeve to test, please post your review below and what you think.
 
I think the materials and workmanship are great, my issue stems from not being able to get it on w/out ripping. When you make a few with more width, I'll try again.
Thx
 
Big Schwanz Acht;753542 said:
I think the materials and workmanship are great, my issue stems from not being able to get it on w/out ripping. When you make a few with more width, I'll try again.
Thx

yeah I know, I am in the process of r and d for a bigger mold to make a 1 inch id sleeve, as well as getting more silicone.
 
I'm on target to post my own, in depth review this Friday. I'll share how I feel about the quality of the sleeve as well as, how well I feel it will work for applications like cock rings, a clamping cushion and as a hanging sleeve with a device like hanger.
 
if you could, please take some pictures when you do, as I do not have a decent camera anymore thanks to the cat.
 
bandit2010;753555 said:
if you could, please take some pictures when you do, as I do not have a decent camera anymore thanks to the cat.

That is the plan sir. :)
 
Good to see you are continuing to work on this. I pray we can get it perfect!
 
I am going to post a review this weekend i wanted to get pictures and to write it up properly, just wanted you to know i didn't forget lol
 
Lookn4girth;753712 said:
I have not received mine yet bandit. Did you get the MO I sent

yeah I got it Monday , I have got to get your sleeve in the mail tomorrow or Friday.
 
I can not stress this enough, I need the people I have sent sleeves to, to post what they think, so I will know what to do, as I am getting ready for the next step in things,
 
Thank you again Bandit for taking the time to make these sleeves!

The goal I had in mind while testing these out is to see where i could apply it in a routine. I had tested it as a pump sleeve to try and reduce fluid retention during use of the Bathmate, as well as testing it as a replacement/addition with the ace wrap for the Length master and lastly as a replacement for the ace wrap if your using it as a method to prevent turtleing.

My first impression of the 6" sleeve was that the materiel was smooth a tad tacky and flexible, it was able to roll up completely for easy application. I was comparing it to a second sleeve i have had for about a year so that i could give a good comparison.

I have used it with the bathmate a couple of times, the soft flexibility of the sleeve provided some great padding, if your having an issue with gator bite or just not enough girth to fill the negative space of the tube (as i feel i do) this helps immensely as it stretches with you really well and adds that extra little bit. I have used it to try and reduce or remove fluid retention from happening alas the soft flexibility of the 00-20 silicon offered too little resistance to prevent it much it did add a little force to reduce to overall level, the other tube i have i think is 00-30 silicone which if it was not partitioned into 2" sections would work perfectly for this.

I haven't had as much time to test it with the length master as i would have liked too, what i have found is that because of the slight tac to it the sleeve creates a great grip on the skin. Because of the grip it hold tight combined with a wrap to keep it firmly in place it provides the perfect amount of padding making the length master a far easier device to use. I still have much i would like to test with this including hanging.

I intend to edit and add to this review as i have more that can help. With the picture you have the white tube that is Bandit's creation and the blue lg hanger tube


View attachment 33721View attachment 33720
 

Attachments

  • 20180325_132029.jpg
    20180325_132029.jpg
    283.8 KB · Views: 2
  • 20180325_131954.jpg
    20180325_131954.jpg
    294.5 KB · Views: 0
Sinthious;753897 said:
I have used it with the bathmate a couple of times, the soft flexibility of the sleeve provided some great padding, if your having an issue with gator bite or just not enough girth to fill the negative space of the tube (as i feel i do) this helps immensely as it stretches with you really well and adds that extra little bit. I have used it to try and reduce or remove fluid retention from happening alas the soft flexibility of the 00-20 silicon offered too little resistance to prevent it much it did add a little force to reduce to overall level, the other tube i have i think is 00-30 silicone which if it was not partitioned into 2" sections would work perfectly for this.

This was what I had in mind when I first saw that Bandit was willing to make them...would a more 'resistant' silicon help?
 
Big Schwanz Acht;753926 said:
This was what I had in mind when I first saw that Bandit was willing to make them...would a more 'resistant' silicon help?

I actually chatted with Bandit on the phone last week talking about that we also talked about how the air bubbles from the silicon not being degassed could have compromised the sketchiness or just not big enough for your massive size, imo yes going to the 00-30 silicon (the one with more resistance) from the current 00-20 will likely reduced the fluid retention why i say this is because the Lg Hanger sleeve i have i think is the 00-30 and it does reduce the fluid retention to the point where i don't get edema near the circ scar but with it being cut into 2" sections i get areas around the where it meets that do swell up so one solid tube is needed. There has to be a hand off though as just like fr reducing gains too much resistance from the silicone tube will as well.

I had mentioned to Bandit that we should find someone who could 3d print the mold, particularly the center rod so that there is no shifting (one wall tend to be minutely thinner which could compromise strength) Does anyone here have access to one?
 
Last edited:
Sinthious;753928 said:
I actually chatted with Bandit on the phone last week talking about that we also talked about how the air bubbles from the silicon not being degassed could have compromised the sketchiness or just not big enough for your massive size, imo yes going to the 00-30 silicon (the one with more resistance) from the current 00-20 will likely reduced the fluid retention why i say this is because the Lg Hanger sleeve i have i think is the 00-30 and it does reduce the fluid retention to the point where i don't get edema near the circ scar but with it being cut into 2" sections i get areas around the where it meets that do swell up so one solid tube is needed. There has to be a hand off though as just like fr reducing gains too much resistance from the silicone tube will as well.

I had mentioned to Bandit that we should find someone who could 3d print the mold, particularly the center rod so that there is no shifting (one wall tend to be minutely thinner which could compromise strength) Does anyone here have access to one?

this is something I am looking into, I honestly don't think it would compromise it that much.
 
bandit2010;753929 said:
this is something I am looking into, I honestly don't think it would compromise it that much.

Oh no yeah the bubbles were not the major cause i agree that it just needs to be a bit bigger for Acht,
Thank you for your hard work Bandit we all appreciate the knowledge that we gain through this project.
 
Back
Top Bottom