crazyed27

0
Registered
Joined
Nov 25, 2003
Messages
2,140
I've finally got this together! Took long enough!

What you need?

1 Hose clamp, 2 inch or so. Make sure it fits around the pipe insulation with a small space still showing maybe 1/4 inch. 49cents at home depot!

1, 6 foot strip of pipe insulation, 2 in or less depending on your flaccid girth. Find a size that will fit your flaccid penis snug. 1.49 at home depot!

Thats it thats all you need to buy!

Step one cut a piece of pipe insulation 3/4 to an inch wide.

Step two put the pipe insulation on over the flaccid penis, all the way to the base as far as you can get it. Begin to become erect. I should'nt have to tell anybody how to become erect!

Step three at around 50% erect put the clamp on, center the clamp on top of the pipe insulation. Tighten the clamp some. Begin to get fully erect. Once your there tighten the clamp to desired tightness. Push the clamp and insulation into the pubic bone and kegel for fuller engorgement. do the desired constrictor you want. Thats it!

When taking off the clamp and insulation, just release the clamp, then you have to tear the insulation to get it off. Don't worry about wasting the insulation, because a 6 foot strip will last a long ass time.

A cable clamp works great with the pipe insulation as padding for the penis. So if you want more padding for oyur cable clamp try the insulation out.

This is the method I use for ADC. It is very small, and you can't even tell you got it on!
 

Attachments

  • demo1.jpg
    demo1.jpg
    71.4 KB · Views: 2
  • demo2.jpg
    demo2.jpg
    61.8 KB · Views: 2
  • demo3.jpg
    demo3.jpg
    79.4 KB · Views: 1
  • demo4.jpg
    demo4.jpg
    66 KB · Views: 2
  • demo5.jpg
    demo5.jpg
    69.6 KB · Views: 5
  • demo6.jpg
    demo6.jpg
    81.1 KB · Views: 4
  • demo7.jpg
    demo7.jpg
    66.5 KB · Views: 4
  • demo8.jpg
    demo8.jpg
    77.5 KB · Views: 3
Seems like a fasinating contraption...

What are these for, Im not really too familiar with most of the terms or proceduers around here...

To me, they seem like a type of Hold, yes?

How long do you wear that device for?
 
Looks like fun! :D What section is this stuff found in? I'm gonna run by there in a minute.

-ItsElectric
 
ItsElectric said:
Looks like fun! :D What section is this stuff found in? I'm gonna run by there in a minute.

-ItsElectric



Man I'm sorry I forgot what section this stuff is in. I do know there not on the same isle here in St Louis. I just walked around and ended up finding this stuff!
Yes and it is fun ass hell! lol
 
looks very good indeed.
I shal buy these sometime.
Will add this into the next revision of the guide.
 
REDZULU2003 said:
looks very good indeed.
I shal buy these sometime.
Will add this into the next revision of the guide.


KOOL!!!


Red See the doggy? HUH? lol
 
Last edited:
GreatShinobi said:
Seems like a fasinating contraption...

What are these for, Im not really too familiar with most of the terms or proceduers around here...

To me, they seem like a type of Hold, yes?

How long do you wear that device for?



Hey man go to reds Redzulus post here and click on this THE CONSTRICTOR GUIDE REVISION 4 **NEW**
and you will find every thing you need to know!
 
also forogt, the DOGG is there *AGAIN* lol stareing up at the fucking gear.
If only that dogg could talk.
 
lol I just got back with my stuff, pretty easy to find. I can't wait to do these tonight!

-ItsElectric
 
Im thinking about getting this but wondering if it is Just as good as the CAble clamp. Would you's use this instead of a cable clamp.(truthfully)
 
I've yet to try this method myself, but it looks like it has the potential to work just as well if not better? Looks like it constricts in a more circular direction than a cable clamp would?

Do you cut a slit down the middle of the insulation after cutting it for the width, or does it stay a solid ring?
 
stillwantmore said:
I've yet to try this method myself, but it looks like it has the potential to work just as well if not better? Looks like it constricts in a more circular direction than a cable clamp would?

Do you cut a slit down the middle of the insulation after cutting it for the width, or does it stay a solid ring?


It stays a solid ring, I tried cutting the middle the first couple of times I did this and its very hard not to pinch the skin. The pipe insulation works as a seal, much better than a ace bandage! I use the cable clamp as well with the pipe insulation and it works like a charm! The hose clamp works better with ADC, while the cable clamp is good for constrictor work just because how easy it is to snap on and off. The hose clamp is a little more difficult, but not much!
 
OK thats enough info to convince me....
(....runs to the hardware store BAREFOOT....)
 
ItsElectric said:
lol I just got back with my stuff, pretty easy to find. I can't wait to do these tonight!

-ItsElectric

Let us know how you like them!
 
I read somewhere that this constricts more-so than the cable clamps, but the only downside was that you have to screw and unscrew it, to take it on/off.

-ItsElectric
 
ItsElectric said:
I read somewhere that this constricts more-so than the cable clamps, but the only downside was that you have to screw and unscrew it, to take it on/off.

-ItsElectric


I have used these hose clamps on and off for a while because I could not find
cable clamps. They work great as far as I am concerned. The only thing I do
different is use a piece of rubber hose instead of the pipe insulation. I have
not done a daily routine with the clamp because I am doing a regular weight
hanging routine for length. But I want to tell you that you can enlarge the
living crap out of your dick with this thing. It is better than pumping for
short term enlargement. But unlike pumping, your dick seems to be hard with
with blood instead of fluid build-up. With a normal routine it is my opinion that
you could easily get as thick as a coke can. I can do a session with one of these and barely get it in my wife and she has a pretty loose twat. As you
can tell, I can't say enough about these things. The only down side is having
to screw and unscrew during the routine.
 
ItsElectric said:
I read somewhere that this constricts more-so than the cable clamps, but the only downside was that you have to screw and unscrew it, to take it on/off.

-ItsElectric


True to that. I just use mt fingers to tighten and loosen the screw. In the beginning I used a screw driver, I think after awhile the screw becomes easier to loosen and that is why I now do it with my fingers. With the insulation you really don't need to tighten the clamp to much, because the insulation works as a seal around the penis to hold blood in there!

Like I said before the cable clamp works great with the insulation too!
 
Nice thread!

Your dog was like "WTF is my owner doin' now" :D
 
These work great!! Now what i'm trying to fiddle with is Clamping the base with the hose-clamp and then clamping right under my head with the cable clamp. Oooooooooooooh yayah!

-ItsElectric
 
Back
Top Bottom