Got the MityVac!

kizzle82

0
Registered
Joined
Dec 15, 2012
Messages
48
I received my MityVac right before I had to leave to work for a few weeks and would like to thank every one at MOS for helping me with order tracking and making sure I got it in time.(monkey) That having been said, it is a very nice piece of equipment that is far more comfortable to use than the bathmate or penomet. The packaging is great, the shipping label doesn't say MOS so nosy googlers won't figure out what it is. Everything about it is quality. Very nice job? I have only got to test drive it once but it was pretty straight forward. My only concern thus far is I was having trouble with it keeping pressure. I will experiment further with lube, position etc next time to see if I can correct it(chalking it up to user error). I am also interested in routines, duration etc when using this. With the silisleev and 6in hg it really doesn't feel like a lot is going on. Much different feel than the bathmate. Great job MOS!
 
Awesome! We were supposed to get a video done Monday but we had a crazy day and hopefully have it up by Tuesday afternoon. Are you disconneting the vac-line from the pump once you build pressure?

Are you using the MitySleev?
Are you hydro pumping or dry pumping?

If you have any immediate questions, you can PM me or hollar at us in the shop chat.
 
I tried dry last time and tonight. Tried disconnecting this time much better. I still have no idea on a time frame. I went at 5in hg for about 10 min, then took it off, massaged a bit, then went for another 10 minutes. As soon as I pulled it off my unit it felt very fatigued. I then tried to do a little edging but EQ was at like -2 (cwl). Thinner than I am usually(which already sucks lol). No pain or bumps or anything though. You do have to watch the expansion at the base. It gets tight when you have the sleev on.
 
For beginners

Start pumping slowly;
there should be a gentle tugging feeling. If there is any pain or discomfort, you should reduce the vacuum and STOP if it continues. Release the vacuum often, especially for first time usage. Little and often is the key. To release the vacuum , use the release lever on the pump handle.

DO NOT exceed a static vacuumgreater than 6 inch Hg / 15cm Hg / 0.2 bar. A vacuum up to 10 inch ( 25 cm) Hg is acceptable only where the vacuum is continuously cycled slowly between 10 inch and 4 inch.

For more advanced

Go for the popular 5x5x3 routine

Girth Program: 5x5x3
5 Minute Slow Squash Jelq
5 Minutes in the MityVac at 6in

5 Minute Slow Squash Jelq
5 Minutes in the MityVac at 6in

5 Minute Slow Squash Jelq
5 Minutes in the MityVac at 6in
 
Last edited:
I tried dry last time and tonight. Tried disconnecting this time much better. I still have no idea on a time frame. I went at 5in hg for about 10 min, then took it off, massaged a bit, then went for another 10 minutes. As soon as I pulled it off my unit it felt very fatigued. I then tried to do a little edging but EQ was at like -2 (cwl). Thinner than I am usually(which already sucks LOL). No pain or bumps or anything though. You do have to watch the expansion at the base. It gets tight when you have the sleev on.

I’m happy you arrive safely and I am very happy that you’re pleased with the quality. Take your time and learn everything and master it before you go all out. I look forward to your future testing and reviews.
 
Pleased you like it, and it will greatly help you in what you want. If you have trouble at the base with the sleeve, try applying lubrication around the sleeve, and see if that helps you slide in better.
 
Also some great pumping advice in the first post of this thread, and it applies to yours.

 
Also, put the MitySleev on your penis first so you can properly stretch it around the base of your penis over the SiliSleev like in the picture below, Then stretch the MitySleev onto the MiyVac cylinder.

1820119
 
I am right there with you brother, i also recieved my pump today, my first impressions are: I love the case and accessories, the sleeves and rings are of the highest quality. the case alone i feel is worth a decent amount of money and at right above 100 dollars total its a win win. Well my first session i must say i was pleasantly surprised, can feel the expansion greatly, and hydro pumping is awesome makes your dick look huge haha, I also experienced the pressure kind of bleeding out i guess? i left everything attached, are we supposed to be detaching something after we build pressure?? I got a great workout nonetheless and my penis looked like a dill pickle all day with the help of a siliring to hold expansion throughout the day, periodically for like 20 min of and on sessions. Also I ordered the 2in diameter cylinder at 5in girth, and i feel as though i am at max capacity, especially going in erect i am almost hitting the sides already, at 6 hg, I feel an upgrade to a 2.25 in cylinder in 3-6 months or so will be needed, are there cylinder upgrades readily available for purchase?? Overall I have to give this product 5 stars for price and quality!!! great job MoS !!! :) im excited to get back to it tomorrow!!
 
I pump to a little higher than I want then detach the hose. It holds pressure that way. Are you using the sleeves when you pump? I can definitely feel the tug when I pump, but when I take it and the sleev off it looks like I didn't do anything. I haven't tried using it as a hydro pump yet. This thing is much different than the BM. Also, do you use the base sleeve for the tube? At 5" girth I can't imagine you fit in that. I'm kinda thin and it is really tight on me. Oh the ring and sleevs are great for wearing all day. Minimal inconvenience for something that keeps you from turtling all day.
 
Awesome review
I am right there with you brother, i also recieved my pump today, my first impressions are: I love the case and accessories, the sleeves and rings are of the highest quality. the case alone i feel is worth a decent amount of money and at right above 100 dollars total its a win win. Well my first session i must say i was pleasantly surprised, can feel the expansion greatly, and hydro pumping is awesome makes your dick look huge haha, I also experienced the pressure kind of bleeding out i guess? i left everything attached, are we supposed to be detaching something after we build pressure?? I got a great workout nonetheless and my penis looked like a dill pickle all day with the help of a siliring to hold expansion throughout the day, periodically for like 20 min of and on sessions. Also I ordered the 2in diameter cylinder at 5in girth, and i feel as though i am at max capacity, especially going in erect i am almost hitting the sides already, at 6 hg, I feel an upgrade to a 2.25 in cylinder in 3-6 months or so will be needed, are there cylinder upgrades readily available for purchase?? Overall I have to give this product 5 stars for price and quality!!! great job MoS !!! :) im excited to get back to it tomorrow!!

Awesome review! Yes, detach the vacuum hose from the pump cylinder if you want to maintain a constant pressure. Leave the pump handle attached when you want to cycle between high and low intensities just like High Intensity Interval Training.

We will have Cylinder upgrades available and we are now starting to handcraft heavy duty 6mm thick wall cylinders with custom lengths and and widths.
 
I pump to a little higher than I want then detach the hose. It holds pressure that way. Are you using the sleeves when you pump? I can definitely feel the tug when I pump, but when I take it and the sleev off it looks like I didn't do anything. I haven't tried using it as a hydro pump yet. This thing is much different than the BM. Also, do you use the base sleeve for the tube? At 5" girth I can't imagine you fit in that. I'm kinda thin and it is really tight on me. Oh the ring and sleevs are great for wearing all day. Minimal inconvenience for something that keeps you from turtling all day.
Yes i use it. I start by lubing then i have to stretch the base sleeve like i do the silirings around my shaft, i then get it comfortable and press tight to my fatpad as possible, it is a little tight but i like this, and see it as beneficial it acts as a constrictor just slightly keeping me pumped inside with a couple kegels, then i add the cylinder and create vaccuum and the expansion is great! this is all hydro method though as i dont have a desire to pump without water at this time.
 
Awesome review


Awesome review! Yes, detach the vacuum hose from the pump cylinder if you want to maintain a constant pressure. Leave the pump handle attached when you want to cycle between high and low intensities just like High Intensity Interval Training.

We will have Cylinder upgrades available and we are now starting to handcraft heavy duty 6mm thick wall cylinders with custom lengths and and widths.
thanks lightning, i will definitely detach from now on that will help me alot, also thats great replacement parts and upgrades would be great, music to my ears lol
 
Yes i use it. I start by lubing then i have to stretch the base sleeve like i do the silirings around my shaft, i then get it comfortable and press tight to my fatpad as possible, it is a little tight but i like this, and see it as beneficial it acts as a constrictor just slightly keeping me pumped inside with a couple kegels, then i add the cylinder and create vaccuum and the expansion is great! this is all hydro method though as i dont have a desire to pump without water at this time.

Yes, the MitySleev acts as a restrictor ring while you are pumping. First get a boner, pop the silicap on, pop the silisleev on, jelq a bit, pop the MitySleev on then attach the cylinder and start pumping.

The MitySleev keeps the blood packed in the penis as it expands. After you are done with your session, pop the SiliRing on to keep expansion for another hour. Some people also pump with the SiliRing on as well for extra constriction.
 
We just updated the MityVacs with new high-end air-vac connectors. Tomorrow we will be sending everyone the new 12" air-vac hose and CBC cylinder connector that screws on top of your MityVac pump cylinder. These are new high-end parts and they are a new style and they will fix any issues you may have with a loose connection. We will also send you an extra set of MityRings with the upgrade.

Look for an email shortly.
 
Last edited:
Excellent review and thank you for taking the time to be so thorough it is this time to review that helps us make decisions behind the scenes. Keep up your good work and keep making great strides in PE
 
We just updated the MityVacs with new high-end air-vac connectors. Tomorrow we will be sending everyone the new 12" air-vac hose and CBC cylinder connector that screws on top of your MityVac pump cylinder. These are new high-end parts and they are a new style and they will fix any issues you may have with a loose connection. We will also send you an extra set of MityRings with the upgrade.

Look for and email shortly.
you had me at extra set of mityrings lol
 
let me know when we can purchase the cylinders seperately, i will probably need to upgrade sooner rather than later, im packing it already and sometimes my head like drags up the side and kinks to the side a little, its not too bad i just restart with more lube or more water, and good to go, and i know you guys are still prolly working out all kinds of details, but if or when i can do that holler atcha boy! lol
 
All the new version MityVac parts have just shipped out to existing MityVac users. They shipped in a plain unmarked 10" x 6" white bubble poly envelope via USPS from PPC Corp. They should be in your hands by Tuesday-Wednesday.
 
let me know when we can purchase the cylinders seperately, i will probably need to upgrade sooner rather than later, im packing it already and sometimes my head like drags up the side and kinks to the side a little, its not too bad i just restart with more lube or more water, and good to go, and i know you guys are still prolly working out all kinds of details, but if or when i can do that holler atcha boy! LOL

Will do, should be by this week.
 
Back
Top Bottom