DLD

doublelongdaddy
Administrator
Super Moderator
Registered
Joined
Jun 3, 2003
Messages
124,029
This is a weight holder that I made at my shop. As you can see it is a weight in it's self! It's very simple and streamline, and so easy to_when it comes to changing weights.This is just my design on a weight holder, as I know there are multitudes of different types of holders out there.
_
 

Attachments

  • weight holderbar.jpg
    weight holderbar.jpg
    24.9 KB · Views: 2
With Weights
 

Attachments

  • weight holder.jpg
    weight holder.jpg
    40.5 KB · Views: 2
Another device I have been working on,_is the penis roller! This is used for girth work as well. It is a very crude design, and I have plans in modifying it, to where it is more stream line, and not so cumbersome! But in saying that, it is a good tool as well, as you can control the pressure, with the handles. You start at the base, apply pressure and push out, then you release pressure, and return to the base, to start over! Can be turned vertical as well. Can be used with a clamp. I will email you pictures of the new and improved version in a week or so.
 

Attachments

  • roller1.jpg
    roller1.jpg
    40.9 KB · Views: 2
Rollers Close Up
 

Attachments

  • roller2.jpg
    roller2.jpg
    62.5 KB · Views: 2
This is a device that I come up with, that I use in my girth routines. It's simply an adjustable channel lock, that I have welded 2 pieces of flat sheet metal to. Once the bits of flat have been welded, you then wrap the flats in some material that is comfortable to the skin. There is a special way of determining the correct angle of the flats before you weld them! I will go into that more, and also the dimensions of the flat as well if you post it.
_
All I can say, is that if you use such a tool, you have to be extremely careful, as the pressure is unbelievable!!! I use it with a clamp and with out. You can work the penis in small sections up and down the shaft, and it can be used all away around the shaft to hit different areas! Girth workouts tend to be shorter when this device is used, as it kicks ass!!! Let me know your thoughts, and if you need more info!
_
Girthius
 

Attachments

  • flattener1.jpg
    flattener1.jpg
    31.2 KB · Views: 2
Flattener Close Up
 

Attachments

  • flattener2.jpg
    flattener2.jpg
    33.6 KB · Views: 2
Good mourning DLD! It's Girthius, from the UK! Thank you for allowing me to send the images this way! I am still trying to correct the problems that are blocking me from posting pictures. Also as of yesterday, I do not receive any emails from postings that I have participated in, at the forum, so there is no way of knowing if someone has replied to my comments!?
_
Anyway, lets get down to the business_with this strap of mine. The strap was taken from an old sports bag. I did not have to cut anything, it had a connection on each end, one male, one female, you just snap them together! It also has 2 adjustments to lengthen and shorten the device. Also in the central part of the strap, you will notice an S hook, which I use for exercise that concern the use of a nylon cord, attached to S hook on the strap to an immovable object such as a sturdy beam.(I will get pictures of my set-up with this beam, screws that I use, and cords.) Their are many different exercise you can do with the strap. It can be used to assist with DLD Blasters, with a BIB, basic stretches, stretches involving a stationary object, such as a beam, or post, stretches that are done from a bar stool, so as to get more of a BTC angle. I'm sure there could be even more exercises performed if one took the time to really work with it.
_
_
Anyway I hope this can assist you and the others at the forum! I will also send more examples of other creations to help others!! Thanks once again for letting me email you with my pics., etc!!
_
Girthius
_
Ps: If you need better quality pictures, I can try to redo them, just tell me how you need them.Also if you do post them, at least I will be able to comment on them and to try to answer questions.
 

Attachments

  • strap1.jpg
    strap1.jpg
    44.8 KB · Views: 2
Strap Close Up
 

Attachments

  • strap2.jpg
    strap2.jpg
    29.7 KB · Views: 2
Even Closer
 

Attachments

  • strap3.jpg
    strap3.jpg
    41.3 KB · Views: 2
speechless.


the only words i can think of right now is; INTENSE! INTENSE! INTENSE!

:O


just looking at that wrench brings a sudden soreness to my wang.
 
Thanks DLD, for posting some of my creations! I know that by posting it this way, through you is very unorthodox! But it proves what I have feared most, that my computer system is not configured correctly somewhere, so the search to find the problem begins!But in saying this, I have still prevailed in delivering some of my ideas, thanks to you.I hope that all members can take something from my ideas, and perhaps make something on their own, and to experiment! This is how things evolve, and better gadgets come about! As you make something, you all of a sudden have ten more separate ideas, and it goes on, and on! More to come!!! Enjoy!!!!!!!!!!!!!!


Girthius
 
Hey that is kinda like the power jelq, what are the straps for?
 
The strap is to assist with the DLD blasters, basic stretches, and to attach to an immovable abject such as a beam or post, as the strap has an S hook in the central part of it. The small loop goes around your wrist(right or left), and the big loop goes around your foot(right or left). The main purpose is to get assistance from the leg muscle, by pushing out while stretching.

Girthius
 
The flattener is one of my favs! But be careful, it is a fucking gorilla grip!!

Girthius
 
good stuff dude.
The rollers remind me of the ATS rollers made by the late AfterTheShock [MOD here]...I done the exercise it is great and this device will bring the exercise home.
 
I mentioned that one of the possibilities with the strap or a BIB hanger, is to hook up to something like a post or a beam. The eye screws that I used are 2" in total length, and the eyes are roughly .750 across. I located a suitable post, that has no give in it, and attached 3. One at floor level, one at waist high, and the third one, about the top of my head 6ft2". You will need to make 2-3 different lengths of cord, with an open end, and one end with an S hook attachment.After this you are ready to go!!
_
_
1.The lower eyescrew is good for the ligs. Simply hook up to it while facing the post straight on. The cord needs to be short enough that when you hook up, you must bend your knees abit.A slightly shorter cord will force you to bend your knees when getting into the stretch. This will help to increase the stretch.Stretching positions include: straight down, sideways(right and left), and a different version of DLD's Lazy Ass Stretch( get into a straight down stretch, then pick your right leg up and put it over the top of the cord, almost like your getting onto a bike. You should be in a position with your ass cheeks facing the post and you cock head facing the post! All you do then is slowly lean forward!! Very good one for the ligs!!)
_
2. The middle eyescrew is good for both ligs & tunica. With this eyescrew you can use the same cord, as in the lower exercise, or you can make one that is separate, perhaps a little shorter. The middle eyescrew can accommodate the following stretches: Straight out, and sideways(right& Left), and the variation of DLD's Lazy Ass Stretch.
_
3.The upper eyescrew is good for tunica work. The second cord that needs to be made, needs to be made to where the open end dangles near your naval. Exercises used with the upper eyescrew include: straight up, sideways straight up(right & left), and with your back against the post, you can do another variation of straight up. Once in this position, slowly crouch down.
_
All these exercises can be performed with a strap, or BIB hanger and possibly more! Happy experimenting!!!
_
Girthius
 

Attachments

  • post with eyescrew.jpg
    post with eyescrew.jpg
    41.2 KB · Views: 2
2
 

Attachments

  • eye crew and nylon co#f3731.jpg
    eye crew and nylon co#f3731.jpg
    41.3 KB · Views: 2
3
 

Attachments

  • eye screw.jpg
    eye screw.jpg
    46.7 KB · Views: 2
For those of you that have a Jes- Extender, the problem of the loop coming of the glans, can be a problem! Then you have a major problem, with the extender sliding down your trouser legs, onto the floor. This isn't too bad if you are at home alone, but what if you are wearing it at your job, or at a mall, not a good situation to be in! I have come up with a safety device to protect against such things. It's very simple to make! All you need to have is_some nylon cord, and a plastic snap clip(like off an old sports bag)Make an open loop on one end of the cord, put the other end of the cord under the left side of the extender's frame, pull the cord over the top of the left side of the extender frame, and put it through the open loop, then pull snug. Position it over the threaded area on the left side. After this pull the end of the cord around your waist, you should be on the right side of the extender now.Now you need to estimate how much cord you will need to tie off to the clip. Remember it needs to be snug enough that if it comes off, it will hang in place!_The best way to do it, is let the hanger dangle, and make adjustments, as necessary, so as to find what is comfortable, ,and what will assure the best in a safety cord.Once the cord is finished, all you have to do is clip it on--EASY
_
Girthius_
 

Attachments

  • extender safety cord.jpg
    extender safety cord.jpg
    53.7 KB · Views: 2
Back
Top Bottom