From homemade lengthmaster to newly purchased lengthmaster :)

smooth_op

0
Registered
Joined
Aug 10, 2008
Messages
119
Hello DLD :)
I've returned to the world of PE recently and have just purchased a lengthmaster this afternoon. About 10 years ago, I made myself a homemade one that worked pretty well. I'm looking forward to trying the real deal when it arrives, so I just wanted to share my bliss!
 
Hello DLD :)
I've returned to the world of PE recently and have just purchased a lengthmaster this afternoon. About 10 years ago, I made myself a homemade one that worked pretty well. I'm looking forward to trying the real deal when it arrives, so I just wanted to share my bliss!

I saw your order come through and I’m so happy that you are returned. I remember your homemade LM, did you post pictures of it? If so then I know the one you’re talking about. Just nothing like the real thing though. I can’t wait for you to get it and give us your review. If you haven’t I suggest you pick up some sleeves from our store as they will really benefit you in wrapping for the Lengthmaster. Users are reporting unbelievable comfort even with the most intense stretching.
 
giphy.gif
 
Things are going good, getting some initial stretching going again with some nice rotary cranks in the mix. Limbering up for some deep stretching once the LM arrives.
My quick go to vacuum pump arrived, fresh from Amazon too...I've used these successfully in the past: https://www.amazon.ca/Python-24-Inch-Spill-Clean-Gravel/dp/B004PBHX4G

This is going to be a very cool comparison to what you made compared to the real model. I know I asked you before but just to get a good idea how long did it take you to make this and how much money did you invest? Thanks :)
 
Since it was 8 or 9 years ago, I can't remember it taking too long to make. Cutting from hole to hole and shaping the curvature of the big ring is what took the most amount of time. The piece of black ash was only $12 to buy, as I looked up my old post. Shellac was used as the varnish/clear coat and it was really easy to work with. Foam adhesive backed insulation/weatherstripping was used and my table saw was used to take some extra off of the clamping piece.

The new LM looks like it is made of something like a composite decking material, a plastic wood of sorts.
 
Since it was 8 or 9 years ago, I can't remember it taking too long to make. Cutting from hole to hole and shaping the curvature of the big ring is what took the most amount of time. The piece of black ash was only $12 to buy, as I looked up my old post. Shellac was used as the varnish/clear coat and it was really easy to work with. Foam adhesive backed insulation/weatherstripping was used and my table saw was used to take some extra off of the clamping piece.

The new LM looks like it is made of something like a composite decking material, a plastic wood of sorts.

Flexible composite. Wood Lengthmasters we’re breaking for some customers so we switched to a flexible PVC that would allow the user to use a lot of strength with no fear of breaking.
 
That sounds awesome DLD, the double handed stretches with powder will be awesomely good :)
 
  • Like
Reactions: DLD
I love the woods so much and I hated to give it up but it was so important to making the device strong. So what I did was arched the arms so that would give them more strength and lightning found the new composite that was very strong but also had some flexibility to it. Since that time we’ve only had a few lines mattress come back. When they were would I get one and 20 back. I love the woods so much and I hated to give it up but it was so important to making the device strong. So what I did was arched the arms so that would give them more strength and lightning found the new composite that was very strong but also had some flexibility to it. Since that time we’ve only had a few LM come back. When they were wood I get one and 20 back!
 
I just had an impromptu stretching session here while measuring my flaccid bone pressed stretched length and checking it on my ruler. In the attached pic, the black ink mark on the left is my start point from about 10 days ago. I looked up the __________ stretch for reference and got out my powder. I did a 30 second stretch with each hand, and then did some other stretching using my fingers as a fulcrum for 4,3,2 and finally 1 finger. I could feel my cock almost letting go as I kept stretching it further, like it was returning to its previously stretched capacity. The final black mark on the right is the final reading after stretching for about 10 mins only and is the new length of 7 5/8's. I think this is awesome to see that it can be restretched to its former glory!
On the ruler can be seen the previous scratch marks from the pen of 8" and 8 1/8th with just the ink wiped away. This is great to see and I'm curious what a "__________ Month" will do for my length! Woo hoo!!!!1819595
 
You’re so much like me in the sense of what you’ve done here. Are used to use a cable table in my bathroom, somewhere on the forms there’s a thread that shows it, but I would mark off my size after every workout to see if I was making temporary length gains. It’s a big boost in confidence and should inspire you to work even harder.
 
Today is the day...it has arrived. I heard a knocking at the door and there was this box addressed to me. I opened it up, undid the wrapping and there it was, the Penis Wrench :)
Within 2 minutes I had wrapped, put myself in the clamped part, heard the oh so familiar wing nuts swiveling sound and I was locked in. I did a bunch of twists, stretches, pulls to the left and right, hooked up the rope for added tension too and there I was. Took some good pics too to show the initial LM day of arrival, lol1819666181966718196681819669
 
Awesome dude! It’s so happy to hear that knock on the door! How would you compare it to your own model?
 
Some comparisons would be good to make on a side by side basis, however I think mine actually got thrown out before I got divorced back in 2012. Glad there are pics on the forum for reference.
The first thing that struck me was it's appearance. I used black ash wood for my LM in order to mimic the properties of it, however all of my components turned out to be a bit bulky. The current LM model appears to be a lean, mean stretching machine that means business. It's sleek, it's finished well (I can't believe how smooth the shiny surfaces are), the clamps are just thick enough for good compression on the cock. The cutout in the clamp for the rubber gripping inserts are "just right" for the task at hand. The amount of torque that can be added onto the device by adding the rope under both of your feet is to die for and using the LM for side stretching by grabbing the ring and pulling your cock in the other direction gives so much force available to the user.
My only criticism that is a minor point would be in the finish. Due to the nature of the material, I see that the edges are somewhat porous. I used shellac on my wooden one and it helped the cock to move freer and more easily while in the act. The thought of using a clear coat spray crossed my mind in order to alleviate this, however I'll give it some time and won't jump to any modifications.
 
Some comparisons would be good to make on a side by side basis, however I think mine actually got thrown out before I got divorced back in 2012. Glad there are pics on the forum for reference.
The first thing that struck me was it's appearance. I used black ash wood for my LM in order to mimic the properties of it, however all of my components turned out to be a bit bulky. The current LM model appears to be a lean, mean stretching machine that means business. It's sleek, it's finished well (I can't believe how smooth the shiny surfaces are), the clamps are just thick enough for good compression on the cock. The cutout in the clamp for the rubber gripping inserts are "just right" for the task at hand. The amount of torque that can be added onto the device by adding the rope under both of your feet is to die for and using the LM for side stretching by grabbing the ring and pulling your cock in the other direction gives so much force available to the user.
My only criticism that is a minor point would be in the finish. Due to the nature of the material, I see that the edges are somewhat porous. I used shellac on my wooden one and it helped the cock to move freer and more easily while in the act. The thought of using a clear coat spray crossed my mind in order to alleviate this, however I'll give it some time and won't jump to any modifications.


Awesome to hear and I’m so happy that you’re already looking at modifications, that’s what we want to hear. It is the advice and your reviews that inspire us to make modifications. If it were not for our modifications BathMate would no longer be in business! The same goes for size genetics, if we did not come up with the modifications we did they would still be stuck with the noose system!

The beautiful thing now is everything you guys say lightning and I hear we go through it and see if we can bring it to market. We have now gotten to the point that we can make our own equipment and from this point forward the highway is wide open. And who better to make PE equipment then the worlds biggest PE site, right?
 
I wonder what the next "item/area of focus" will be for PE? An area I've noticed where there can trigger a reaction is actually using nipple clamps.
I'm not into any BDSM things, but I had my GF show up with these nipple clamps (pic attached for model type) one day. Being the adventurous guy that I am, I started to try and get some pleasure from my man nipples, lol. One thing I found out is that after getting used to the sensation of it, the arousal would make my cock swell up during sex like it hadn't before. It naturally did this as a response to the different type of stimulus.
Does it sound a bit crazy? Perhaps, but the result spoke for itself and revealed another reaction that could potentially help us all out. Natural swelling that we can trigger? Why not, PE brothers :)
 

Attachments

  • IMG_8363.JPG
    IMG_8363.JPG
    1.2 MB · Views: 2
I wonder what the next "item/area of focus" will be for PE? An area I've noticed where there can trigger a reaction is actually using nipple clamps.
I'm not into any BDSM things, but I had my GF show up with these nipple clamps (pic attached for model type) one day. Being the adventurous guy that I am, I started to try and get some pleasure from my man nipples, LOL. One thing I found out is that after getting used to the sensation of it, the arousal would make my cock swell up during sex like it hadn't before. It naturally did this as a response to the different type of stimulus.
Does it sound a bit crazy? Perhaps, but the result spoke for itself and revealed another reaction that could potentially help us all out. Natural swelling that we can trigger? Why not, PE brothers :)

You’re out of my league now. I might as well be a virgin I’ve been celibate for so long LOL the boy do I love living vicariously through my brothers LOL
 
Back
Top Bottom