Super

Well-known member
Registered
Joined
Dec 5, 2003
Messages
7,301
A while back someone came up with the idea to make the device out of pennies, a great concept, although flawed. It is cheap to make and very ingenious invention. But it will give you minimal to no effects. The reason why? Current. With the size and little mass that the pennies posses, it has no current atll, while it will produce the same voltage as the Rods will, the the current is not there. See, the volts matter in the ring, but the current is what matters more, it what makes the volts travel better. And if there is more current there is more results. Pennies just cannot make enough current to really do anything if at all.

I talked to my dad who has his EE and ME Masters Degree. He said it was a great concept, but it will not produce any current. The 2" rods are what make a lot of current amd they are a pure source, and that is what you need for it to work. The pennies will only make a little current and results will take much longer to happen, plus the meathod of making the ring is far more complicated that just using all the same sizes for the rods and latex, everything 3/8".

Plus US pennies are gross and filtty with germs, even if you was them, that one penny has probbably touched millions of peoples hands. I know I dont want the entire US's germs near my penis. Even if I sanded them and washed them. Some things just never come clean, and a penny is just that.
 
Last edited:
I agree with you on this, when I saw that thread I thought it was a good idea but I wondered how a little penny could produce as much current as the copper and zinc rods, they're not that expensive and only cost pennies to buy themselves, so if someone is really serious about zinging there balls just spend a few extra bucks and build one that work right.
 
Makes sense to me - I have no reason to substitute my ROP anyway. :D
 
agreed. the difference in current would be like comparing dialup internet to a dsl or cable internet connection.voltage is close to the same 0-36v (depending on if there is a spike like a phone ringing)but oviously speeds are different of the amount of information being put through is much greater on the later. And yes I know this is a semi poor example for those that are fimilar with physical makeup of these connections but the idea is there.
 
ehhhhhhhh, you're kindof right. Let me try to clarify. The reason it wouldnt be as effective is most likely due to the amount of copper. Newer pennies are just zinc coated in copper, and pennies are small in the first place. Im sure if you used a couple of older pennies it would work just as well. I tried pennies when i was first tryin to make a ROP. I would just put 4 or 5 between my leg and my balls. It seemed to work just about as good as the rod im using now, you just cant keep them in place.

On another note, im starting to think that current cant be that big of a factor in the ROP. I was in lab the other day messing with some meters and i found that the resistance across parts of your body is in the Mega-oHydromax range. With at most .8 volts in the ROP, the current running through you would probably be in the nano-amp range. It might just be that the Zinc you are obsorbing over time is having the effect.

I dont know, ive been getting pretty good results from the ROP so far, maybe that small amount of current is enough, or maybe the resistance across your package is only a few hundred Kilo-OHydromaxs
 
Sure you can measure the volts but can you measure the current? Also if the current of just 2 pennies is small could'nt you triple it buy useing 6 pennies instead? I disagree you could get a good current with pennies how many would it take, I'm not sure. Also its very simple to make, its not complecated at all. Just use a latex cock ring, strap the pennies in there between the ring and balls, tighten it to your desired effect and bam there you go. Basically this way is for those who want to try it out and don't want to mess with ordering online waiting for the mail, spending extra money, or giving money to someone they dont personally know. I don't see how it would'nt give very similar effects to the ROP that is made of rods. I'll tell you guys what I'll personally give it a test drive, for a while using 3 zinc pennies on one side and 3 copper pennies on the other side. I'll give you my review of the penny zinger. So I'll play the crash test dummie on this one to prove its effects, or no effects.
 
slayman said:
Im sure if you used a couple of older pennies it would work just as well.

Yeah the old pennies are mosty all copper anything after 82.
 
Who's this hobby guy??? Sounds like a punk just trying to start some stuff to me.
 
You know your right supra. Volts don't matter. It is amps that matter.
 
crazyed27 said:
Sure you can measure the volts but can you measure the current? Also if the current of just 2 pennies is small could'nt you triple it buy useing 6 pennies instead? I disagree you could get a good current with pennies how many would it take, I'm not sure. Also its very simple to make, its not complecated at all. Just use a latex cock ring, strap the pennies in there between the ring and balls, tighten it to your desired effect and bam there you go. Basically this way is for those who want to try it out and don't want to mess with ordering online waiting for the mail, spending extra money, or giving money to someone they dont personally know. I don't see how it would'nt give very similar effects to the ROP that is made of rods. I'll tell you guys what I'll personally give it a test drive, for a while using 3 zinc pennies on one side and 3 copper pennies on the other side. I'll give you my review of the penny zinger. So I'll play the crash test dummie on this one to prove its effects, or no effects.

I made one with 3 and 6 pennies, the volts are the same. It is not durable at all, and is filmsy and I really dont like it.
 
Yea and why would you wanna put pennies on your cock? Think of where theyve been. Wishing wells, slimy hands, on the street, probably through a dog's digestive system and out it's ass, who the hell knows. I'd stick with the rods. You get more material, more skin contact, more comfort during wear, you dont have to wonder where the materials have been, and it will just work better overall. I hate seeing somebody from another forum who know's two shits about what theyre talking about ....doesnt even use the product they're putting down....talking about a supposedly 'better way' to make something.
:s
 
stillwantmore said:
Yea and why would you wanna put pennies on your cock? Think of where theyve been. Wishing wells, slimy hands, on the street, probably through a dog's digestive system and out it's ass, who the hell knows. I'd stick with the rods. You get more material, more skin contact, more comfort during wear, you dont have to wonder where the materials have been, and it will just work better overall. I hate seeing somebody from another forum who know's two shits about what theyre talking about ....doesnt even use the product they're putting down....talking about a supposedly 'better way' to make something.
:s

Who knows man
 
Maybe some guys are just too cheap or lazy to make one or buy the materials, who knows. I wouldn't go putting pennies on my balls though, its. just. odd.
 
To reach a good “ROP” effect you need to use the pure metals. Coins are probably an alloy of metals, so producing a lower current. If you check the electro-potentials of copper and zinc (resp. + 0.337 and – 0.763 volt). So if the coins aren’t 100% pure the voltage / current will be lower.
I even tried a silver coin instead of the copper rod, it should give a higher voltage (e-p of silver is + 0.799 volt), but the result was less. The mass and shape of the coin must have an important influence on the total effect.

I wear my ROP for 1½ months now and I notice a lot of positive effects.

Yves
 
American coins are made out of very pure metals, but I think the reason it doesn't work is the amount of metal, and I think especially the surface area of the metal that is in contact with your skin.
 
Yves said:
To reach a good “ROP” effect you need to use the pure metals. Coins are probably an alloy of metals, so producing a lower current. If you check the electro-potentials of copper and zinc (resp. + 0.337 and – 0.763 volt). So if the coins aren’t 100% pure the voltage / current will be lower.
I even tried a silver coin instead of the copper rod, it should give a higher voltage (e-p of silver is + 0.799 volt), but the result was less. The mass and shape of the coin must have an important influence on the total effect.

I wear my ROP for 1½ months now and I notice a lot of positive effects.

Yves

Exactly Right
 
Supra said:
There is just not enough current

just a little Electrical Engineering input. Volt=Current x Resistance
If there is the same voltage potential and same resistance(your body is the resistance) there will be the same current. Saying that, if you had the same amount of copper in the pennies as you do the rod, there will be the same current.

When i tried out the penny idea i cleaned the few i used pretty well and soaked them in lemon juice.

Another thing, there is a simple science experiment kids do at school. They take one penny and one galvanized nail. They stick them on opposite sides of a lemon. When you measure the exposed half of the penny and nail, they get about .8 volts
 
slayman said:
just a little Electrical Engineering input. Volt=Current x Resistance
If there is the same voltage potential and same resistance(your body is the resistance) there will be the same current. Saying that, if you had the same amount of copper in the pennies as you do the rod, there will be the same current.

When i tried out the penny idea i cleaned the few i used pretty well and soaked them in lemon juice.

Another thing, there is a simple science experiment kids do at school. They take one penny and one galvanized nail. They stick them on opposite sides of a lemon. When you measure the exposed half of the penny and nail, they get about .8 volts

Thats the point, a penny will never be as pure or have as much copper as a 100% Copper Solid ROD, not ever

Ans my Dad has his masters in EE and ME
 
Back
Top Bottom