REDZULU2003

Well-known member
Registered
Joined
Jun 3, 2003
Messages
20,066
Why not???? lets get our recipe books out.
Any home-made brewes??? any drugs ya made at home with home-made stuff etc etc.

I do have a LSD recipe somewhere, it actully worked as well about 16 months ago.

But lets get ideas in for homemade drink and drugs :D
 
Hey Red, I don t know how the laws are in the UK, but stateside it is illegal to manufacture narcotics let alone posess them. Some places like Nevada will slap a FELONY conviction on you for mere posession of ONE JOINT. So, Let's NOT share any DIY drug ideas.
 
hee hee hee, chill dude chill.
We cant take drugs over the net, just share fucking info.

My LSD recipe cumming soon.

Snake.... whats that Potatie vodka about??

In the UK making alchohol in the home aint illegal...been happanning for 1000's of years since the Romans.
 
Recipe for the best crack ever!!! Bend your woman over the table and your almost there!! Insert penis (you have 3 options, brown, pink, or both!) Gyrate hips back -n- forth, stir with penis vigorously for 1-2 hours! Once you near the 1-2 hour time limite, add loads of your own special white cream! The recipe is finished once this happens! Can be repeated as many times as you are able to stir!. Enjoy!!!!


Crack Addict!!!

Girthius
 
Originally posted by girthius
Recipe for the best crack ever!!! Bend your woman over the table and your almost there!! Insert penis (you have 3 options, brown, pink, or both!) Gyrate hips back -n- forth, stir with penis vigorously for 1-2 hours! Once you near the 1-2 hour time limite, add loads of your own special white cream! The recipe is finished once this happens! Can be repeated as many times as you are able to stir!. Enjoy!!!!


Crack Addict!!!

Girthius

Haha, I like that recipe! I've made it a few times and didn't even know it! (Well, maybe I did) :)

-ItsElectric
 
dude LSD is one of the hardest synthetic substances to manufacture

I had a few recipes too, but never anything like "Take substance A, burn it, and add Substance B"

From what I've seen and heard the people that actually manufactured 90% of the LSD in the U.S. were busted a couple years ago, and are in jail.

That's why there's been a "Drought" and I haven't seen it in ages, and I'm pretty much very into the drug scene, I took Mescaline the other night, which in my opinion is better than LSD (same thing without the temporary insanity and paranoia, very mellow)

The people who make it are usually professional Chemists with degrees (college,not H.S. Chemistry!) that have access to equipment that costs an arm and a leg (1000's)

From what I understand you have to take some kind of Ergot, which produces a yeast which contains an alkaloid that you have to purify through some kind of process, if it was easy, it would b everwhere, because everybody where I lives is always like "what ever happened to acid, i miss that shit"
 
Chilli Vodka....
Buy a bottle of vodka.
Add around 4-5 chilli's (The strength of the chilli's is upto your own personal taste)
Then leave it for at least a month.

Thats it and if you can handdle it you have balls of steal.

p.s leave the chilli's in when drinking
 
From what I understand you have to take some kind of Ergot, which produces a yeast which contains an alkaloid that you have to purify through some kind of process, if it was easy, it would b everwhere, because everybody where I lives is always like "what ever happened to acid, i miss that shit"

---

It is the ergot virus that makes it....but this can be obtained from Fosters Beer.....I know the exact process to make LSD proper and home-made....no degrees are needed, no fancy shit equipment, just ALOT of time and patience.

I will eventually get yaz the recipe when I find it, sumwhere at home.
 
I got a recipe for japanese cloudy sake, good shit. I'll see if I can find it.
 
Its basically rice wine, its pretty good. Got the recipe from my old aikido instructor.
 
ahhhhh rice wine, I luv the stuff, strong shit man.
How do ya make rice wine anyway??? cant be too hard ?:(
 
Damn It I can't find the dman recipe! I'm not giving up though. Its not all that hard to make rice wine but you have to be careful, because if you do it wrong you will produce methonol (I think) and that shit is toxic and makes you blind over time. But you could buy these testor strips you dip in it to test for methonol. Nothing beats homebrew sake, I'll try to find out a mead recipe as well. Mead gets you fucked up before you even know it.
 
I think it's illegal, but has anyone had experience in distilling alcohol?

It is legal in New Zealand though.
If I decide to start I will have to move there :D

Has anyone tried pot still/refulx?

I will be getting into brewing my own beer though. (Legal)
 
I think distilling alcohol is illegal in the states. Now this sake recipe isn't my original one but I found this one and it should be good.


1. RICE: Cook 6 cups Calrose short grain white rice
(1) in rice cooker (2), in 6 cups pure water.
2. YEAST: Put a little FleiscHydromaxann's Rapid Rise Yeast
(3) (store in freezer for maximum effect) in a
small rice bowl--the size of a very thin dime.
Add some crystals of brown sugar--1/2 dime size.
Add a tiny splash of warm water, dissolving yeast
and sugar with spoon edge--it should look like a
1/2 teaspoon or so of liquid. Place yeast solution
in a warm place to rise. Rising will be indicated
by dots of lighter-shaded brown that finally look
bubbly, and might take about 20 minutes.
3. WASHING: Thoroughly wash your hands, forearms,
and an 11-quart brewing container (stoneware is best,
but a plastic pail is fine (4)), using hot water but no soap.
4. MIXING: After the rice is cooked, let it sit covered for 10 minutes
in cooker, then ladle it into brewing container.
Add 18 cups of cool, pure water, and mix with hand
and forearm thoroughly. Add 3 cups koji (5), continuing
to mix with hand. Finally, add the bubbly yeast and mix in.
5. BREWING: Cover container with cloth and tie down securely.
Store in a dark, cool place (6). After 10 days, strain
once with a metal strainer to separate most of the rice.
It is now ready to funnel into bottles and drink at meals
or other festive occasions.
6. STORAGE: Store in refrigerator if you wish the flavor of the
rice wine to remain constant. After bringing to the table, gently
rock the bottle on its side before opening and pouring, to
obtain best consistency (7).
Note: The strained rice from step 4 should be used to make amazake,
a hot, sweet sake, by boiling with sugar and water--or to pickle
fish (8), by marinating for 3 days in the refrigerator.
(1) NOT sticky or glutinous rice. Why not long-grain rice? I have no idea,
but I know the Japanese are bughouse on the subject of rice, so they
might well be right.
(2) Mrs Chiba obviously has a much bigger rice cooker than I. I can just
fit 2 cups in mine. Clearly, a regular pot on the stove would be
adequate if, unlike me, you ever learned how to cook rice properly
without a cooker.
(3) I strongly doubt that Mrs Chiba used FleiscHydromaxann's in Japan, but
she probably also didn't have access to a sake strain. WYeast will
have one soon; if you're in a rush do it Mrs Chiba's way. The procedure
is a simply proofing; probably a good starter would work as well,
but who knows what to use?
(4) My instinct, like yours, is to reach for a carboy rather than a crock,
but how to get that rice in and out????
(5) If you've read this much, you probably already know what koji is,
but just in case: this is a mold which provides the enzymes needed
to break the rice carbohydrates down to simple sugars for the yeast
to metabolize. Fred Eckhardt maintains that no koji no sake, which
is to say that the mold also provides the distinctive bite that
defines sake whatever grain is being used to brew.
(6) Mr Chiba told me that they only brewed sake during the cool months,
with fermentation temperatures about 65-70. Clearly, the time period
Mrs Chiba lists is subject to reality checks. Make sure fermentation
is done before you go putting this stuff into bottles. It is NOT
intended to be carbonated.
(7) Remember, this is intended to be a white sake, which seems to have
some rice flour in suspension. It would be interesting to compare
this sake with some that had been filtered or racked off the
precipitated flour. Just don't tell Mr Chiba.
 
cool...me try this sometime...thanks.

The LSD recipe is here

----

HISTORY
---------
LSD was first taken in its pure form by Dr. Albert Hoffman, a 37
year old Swiss chemist who worked at the Sandoz Pharmaceutical labs in
Basel. In April 1943 he absorbed a drop of the 25th alkaloid solution
(LSD-25) onto his finger by accident and noted that life had a
"pleasant, fairy-tale quality". On April 19th he deliberatly
swallowed some more, beginning with the tiny dose of 250 micrograms,
or 25 millionths of a gram, a dose so small that no other drug known
produces effects at these levels (200 micrograms is now considered a
standard dose of LSD), and unbelivably to him he started tripping
out.. Sandoz did further tests and these confirmed the enormous
psychoactive potential for the drug..
The US army did huge experiments with LSD, testing it and its eight
known deriatives as an incapitating agent for use in warfare, as well
as testing it for possible uses in reversing brainwashing of
soldiers.. There were secret tests done as well in which soldiers were
unknowingly dosed and observed, also many were done in which they were
knowingly dosed, and the films of these disorientated soldiers in a
wartime situation were shown to demonstrate the great potential for
LSD. Anyone outside the military can really only guess at the extent o
f testing hidden from the public. The Russian scientists experimented
with its warfare potential as well as parapsychological uses of
LSD. The Weather Underground alledgedly held acid sessions to see if
they had been infiltrated by an informer. The medica l profession also
latched onto LSD, testing it for possible uses in rehablilitating
psychotics and schitsofrenics with some positive results. Similar good
results were recorded for people with heavy sex hang-ups, people
addicted to drugs, and psychopaths.


FORMS OF ACID
---------------

ACiD is normally sold in trips, little blotter paper tabs about 1cm
big although the size varies.. It can also be liquid, crystalline in
powder form or in tablets of any description eg- microdots.. The
standard dose is around 200 mics but the strength of the ACiD will
vary enormously of course, as will the quality of the high. The
diffent types of LSD eg (LSD-25, LSD-21, LSD mirror 21) all give
vastly different trips and each one is of course variable. I think
that the crystalline and the liquid forms are the purest.

MAKING LSD
-----
PT 1 - EXTRACTING LYSERGIC ACID FROM SEED
-------------------------------------------

First get your seeds of preferably W1oodrose (argyria [hawaiian baby
woodrose]) variety but Convolvulaceae, Rivea, or Ipomoea will do.. The
overall yield with this method is low, however it can be done with
easily obtained chemicals.. NOTE - the following procedure requires
some knowledge of lab techniques and unless you know what you are
doing you could easily blow yourself up, or poison you and your
friends if the final product is imperfect.. Proceed with caution..
---
Finely grind seeds and add NaHCO3. Extract with ethyl acetate by
soaking about one day. Filter and extract the ethyl acetate with
tartaric acid solution. Basify the extract with NaHCO3 and extract
with ethyl acetate. Dry and evaporate the ethyl acetate to get the
alkaloids. Repeat this procedure on the seeds until no more residue is
obtained. This residue contains the natural alkaloids which are
similar to LSD, as well as other plant products and impurities.

Add 100ml petroleum ether to 100g finely ground seeds and let soak
about two days. Filter, discard and let seeds dry. Add 100 ml methanol
to the seeds let soak about two days. Filter, repeat extraction with
another 100ml methanol and evaporate the methanol extracts in
vacuum. This yellow residual oil contains the alkaloids.


ERGOT ALKALOID HYDROLYSIS
---------------------------

NOTE about ergot. In order to make LSD, lysergic acid is
needed. This can sometimes be obtained, but generally one of the
lysergic acid containing ergot alkaloids such as ergotamine is more
readily available. Ergot is the dried sclerotium of various s pecies
of fungi which infect rye (and other grasses) leading to the formation
of large purple growths in place of the rye grains. These growths are
collected,dried,powdered and the alkaloids extracted. Ergot is mainly
produced in Europe (especially Switze rland). Some is grown in the
USA, mainly for the use of ergotamine and related compounds in
medicine (terminating migrane headaches etc) Many of the ergot
alkaloids are deriatives (amides) of lysergic acid. Unfortunatly these
compounds have little halluci nogenic activity and it is necessary to
hydrolyze (split with water) off the amide, producing lysergic acid
and to synthesise a different amide with greater psychadelic
activity. This hydrolysis can be done with any of the following co

mpounds or a mixture of them : ergometrine , ergine , ergotamine ,
ergosine , ergocristine , ergokrytine , ergonovine (ergometrine) , and
methysergide (Sansert). When -ine is added to the name (eg-
ergotaminine) this indicated the isomers which will produ ce inactive
iso-LSD. A conversion process is detailed below.

Dissolve 20mg of the alkaloid (previous extraction) in 200ml 1M KOH
in methanol (ie. dissolve 56g KOH pellets in 1L 100% methanol) in a 1L
heavy walled vacuum flask and evaporate the methanol in vacuum at room
temperature. To prevent flask from cooling, thus prolonging the
evaporation time place flask in a pan of water maintained at room
temperature by gently heating or warm water running through. Add 400
ml 8% KOH in water to the residue and boil for one hour (under N2 if
possible-this can be done by filling the flask with an N2 stream and
loosely stoppering or by allowing a gently stream of N2 to flow
through during heating. Cool, acidify with dilute sulfuric acid and
shake in separatory funnel with 1L ether. Discard the upper ether
layer and filter the aqueous suspension of lysergic acid(I) in
vacuum. Wash precipitate with 20ml dilute sulfuric acid. To recover
the small amount of (I) in solution remaining in solution, basify the
Na carbonate and bubble CO2 through it. Filter and add precipitate to
first batch. Some isolysergic acid will remain in solution and can be
precipitated by adding 10% HNO3. It can be converted to (I) by adding
3ml 10% KOH for each 0.1g acid, boiling on steam bath for one hour
under N2(if possible) and precipitating by acidifying with glacial
acetic acid. Maximum yield is about 9g (I) for 20g
ergotamine(alkaloid).

PURIFYING
-----------

About 20% of (I) will be isolysergic acid(non psychoactive) and it
can be isomerized to (I) by the above procedure.
Purifying is not nessecary but can be done to improve quality as follows..

Dissolve 9g (I) in 20ml NH4 OH, filter and concentrate in vacuum at
room temperature to precipitate (I). After filtering, the grey
crystals can be further purified by dissolving in boiling water and
cooling in ice bath to precipitate (I). Melting point (point it
decomposes at) is about 240¡C

Alternatively the dark coloured (I) resulting from hydrolysis can be
shaken with 2 X 400ml 2 M NH4 OH in ethanol and the combined extracts
evaporated in vacuum to give (I). Dissolve the remaining residue in
500 ml hot methanol, cool to 0¡C and filter out the (I).

Coloured impurities can be removed by shaking solution with
decolourizing carbon and filtering.

MAKING LSD
------------

LSD FROM LYSERGIC ASID
------------------------

Dissolve 13.4g dry (I) in 250 ml dry dimethformamide and cool to
0¡C. Add cooled solution of 3.4 ml 0.35 M methanesulfonic acid
anhydride in dry dimethylformamide. After thirty minutes at 0¡C add
14.6g (20.4 ml) diethylamine (DEA) and keep at 0¡C for o ne
hour. Evaporate in vacuum to get LSD.

Dissolve 5.3g dry (I) in 125 ml acentonitrile (or dimethylformamide
or proprionitrile) and cool to -20¡C (freezer or dry ice-acetone or
ethanol mixture). Add 8.82g trifluroacetic anhydride in 75 ml
acetonitrile cooled to -20¡C carefully. Let stand at - 20 for 1* hours
or until all (I) dissolves. Then add 7.6g DEA in 150ml acetonitrile
and let stand at room temperature in dark two hours. Evaporate in
vacuum to get LSD.

Dissolve 0.536g (I) in 10 ml freshly distilled POCL3; stir and add
416mg powdered, freshly sublimed PCl5. Hold two minutes at room
temperature, two minutes at 90¡C, and evaporate in vacuum. Extract the
residue with hexane to give the lysergic acid chlo ride-HCl (can also
extract the reaction mixture with hexane instead of evaporating in
vacuum). Alternatively use 6ml POCl3 and 240 mg SOCl2 and heat three
minutes at 90¡C to get the acid chloride. To 5g of the acid chloride
add 1.4ml DEA in 50ml methane c hloride and cool to 0¡C. Stir and add
27.5 ml pyridine and stir * hour at 0¡ . Warm to room temperature and
stir 1* hours. Evaporate in vacuum to get LSD.

To a suspension of 13.4g dry (I) in 800ml dry dimethylformamide
(DMF) in a 2L vacuum flask at 20¡, add a solution of 8.9g
N,N'-carbonyldiimidazole in 250ml DMF and stir at 20¡ in dark for *
hour. Add a solution of 4g DEA in 50ml DMF and let stand 2 hou rs at
20¡;then purify or dissolve residue in 2*L 2% tartaric acid; NH4OH and
extract with a 9:1 solution of ether:ethanol. Dry and evaporate in
vacuum to get LSD.

Add 1L dimethylformamide (freshly distilled if possible) to dry
flask fitted with stirrer, ice bath, dropping funnel and condenser,
both protected from water by Ca chloride drying tubes. Add dropwise
with stirring over 4-5 hours at 0¡ 0.21bs (90.7g) So 3 (sulfuric
anhydride, available as Sulfan from Allied Chem Co.) if precipitate
forms, stir until it dissolves. Sulfan may be made in larger amounts
and is good for several months if kept dry and cool. Molarity of fresh
SO3-DMF reagant should be about 1M, but for precise determination add
a little water to aliquot and titrate with standard NaOH to
phenolphthalein end point. Add 6.45g dry (I) (or 7.15g (I)
monohydrate) and 1.06 LiOH hydrate to 200ml methanolin a 1L vacuum
flask and evaporate in vacuum. Dis olve residue in 400ml DMF at about
15mm Hg through a twelve inch column packed with glass helices or
other material. Cool to 0¡ and rapidly add 50ml SO3-DMF solution (1
M). Stir at 0¡ for ten minutes and add 91.5g (12.9ml) DEA and stir ten
minutes. Add 400ml water, stir and add 200ml saturated NaCl. Extract
the LSD by shaking with several 500ml portions ethylene dichloride
(can use indole test to show completeness of extraction). Combine
extracts (lower layor in seporatory funnel) and dry, evaporate in
vacuum to get LSD.

To a reflexing slurry of 3.15g dry (I)(or monohydrate) in 150ml
CHCl3 add 0.1 mole of the amine in 25ml CHCl3 and 2ml POCl3
simultaneously from seperate dropping funnels over 2 to 3
minutes. Reflux 3 to 5 minutes more till a clear amber solution result
s. Cool to room temperature and wash with 200ml 1m NH4OH. Dry and
evaporate in vacuum(below 40¡C). Can dissolve in the minumum amount of
methanol. Filter and wash crystals with cold methanol and acidify with
a fresh solution of 20% maleic acid in methanol . Filter and wash
crystals with cold methanol to get the LSD or other amide. This method
works with a wide variety of amines. For LSD itself, the POCl3 can be
added first. The yield is about 50%.

PURIFYING
-----------

To purify your extracted LSD dissolve the residue in 150ml CHCl3
and add 20ml ice water. Pour into *L seperatory funnel and drain out
the lower CHCl3 layer into a beaker (after shaking). Add 50ml CHCl3 to
funnel, shake and drain bottom layer into same beaker. Repeat with 3 X
50ml CHCl3 and discard the water. Extract the combined CHCl3 extracts
with 4 X 50ml ice cold water and dry, evaporate in vacuum the CHCl3 to
get 3.5g d-LSD. This is composed partly of inactive d-iso-LSD which
can be recovered and c onverted to d-LSD as follows: dissolve the
residue in 120ml benzene and 40ml CHCl3 (or 200ml methanol), add
tartaric or maleic acid and shake to precipitate mainly d-LSD (add a
little ether and cool in refrigerator several days if nessecary to
ensure comp lete precipitation)) Evaporate in vacuum the solvent to
get d-iso-LSD. Ad 50ml ethanol and 5ml 4N KOH per g iso-LSD and let
stand at room temperature for two hours, evaporate in vacuum (or
extract with CHCl3 as above) to get LSD.

SYNTHESING LSD
----------------

Another way to go about it is to synthesise LSD entirely as I will
now detail.

SYNTHESIS OF 2,3-Dihydrolysergic acid
-----------------------------------
Condense methyl-6-methyl-nicotinate and 5-Br-isatin by fusion at
180¡ to get 57% yield of (I) (I) in boiling glacial acetic acid is
treated portionwise with powdered zinc and refluxed one hour to get
(II). Treat (II) with NaBH4-BF3 (in ether) in tetrah ydrofuran as
above to give (III) which when treated 24 hours with acetic anhydride
gives (IV). Treat (IV) with methyl iodide in methanol-acetone in a
Carius tube to get (V) which is reduced with KGH4 in aqueous methanol
to get (VI). Treat (VI) with NH3 co ntaining NaNH2 for one hour to get
2,3-dihydrolysergic acid (VII) which can be converted to
2,3-dihydro-LSD which is about ten times less active than LSD. (VII)
can be converted to lysergic acid prior to conversion to LSD, which
will triple the yield in t erms of LSD activity.
Dehydrogenation may work for the next process and also may work for
converting 2,3-dihydro-LSD into LSD.

LYSERGIC ACID FROM 2,3-Dihydrolysergic acid
-------------------------------------------
To synthesise Lysergic acid from 2,3-dihydrolysergic acid dissolve
4g (VII) in 78ml 1.5% KOH and reflux five minutes (under N2 if
possible). Add 8.5g Na arsenate hydrate and 16g Raney-Ni (wet [
deactivated by boiling in xylene suspension]) and reflux tw enty hours
(N2 if poss). Filter, precipitate lysergic acid by taking pH to 5.6
with HCl; filter and wash precipitate with water to get 1g lysergic
acid. Evaporate in vacuum the filtrate to get more product.

NB: also see COMPLETE SYNTHESiS OF LSD for another method..

LSD VIA THE Hydrazide
---------------------

Add 1.16g ergotamine.HCl to 4ml anhydrous hydrazine and heat one
hour at 90¡. Add 20ml water and evaporate in vacuum. ( Purify by
adding ether and aqueous tartaric acid, basify the aqueous phase and
extract aqueous phase with CHCl3 to get mainly d-iso- lysergic
hydrazide (I) ( Purify; chromatograph on alumina and elute with 0.5%
ethanol in CHCl3)). To 1g (I),finely ground, in 40ml 0.1N ice cold HCl
add with good stirring at 0W 4ml 1N Na nitrite. Quickly over 2-3
minutes add 40ml 0.1 N NaHCO3 and extract with 100ml ether, then 50ml
ether. Wash ether with water and dry and evaporate in vacuum at
10¡.Dissolve the resulting yellow azide in about 5ml diethylamine(DEA)
at 0¡ and heat one hour at 60¡ in a bomb(sealed metal pipe). Let stand
several hours and ev aporate in vacuum to get about 0.7g d-LSD and
0.15g d-iso-LSD (convert as above). Alternativly the DEA can be added
to the cooled ether solution of the azide and let stand several hours
or overnight at room temperature in the dark in a vented flask.

LSD IDENTIFICATION
------------------
There are a few ways to test for LSD presence and strength..
LSD fluoresces under an ultraviolet light (black light), but so do
many other compounds.
As LSD is an indole deriative it shows positive to these indole
tests (which will also show DMT, psilocybe etc.)

KELLER TEST
Add a little of the powdered substance (0.2mg) to 1ml glacial acetic
acid containing 0.5% FeCl3; layer underneath with 1ml concentrated
sulfuric acid and shake. The colour varies with the indole. (Olive
green - psilocin ; Red-Violet - psilocybin)

VAN URK TEST
Prepare Van Urk reagent by adding 0.5 g p-dimethylaminobenzaldehyde,
100ml water, 100ml concentrated sulfuric acid. Dissolve 1mg substanec
in 1ml ethanol and mix with 2ml Van Urk reagent and illuminate for 10
minutes with an UV lamp (black light). (Psil ocin - blue-grey ;
Psilocybin - red-brown)

QUICK TEST
Saturate strips of filter paper with a 2%
p-dimethylaminobenzaldehyde in 45% ethanol; air dry and store in
tightly stoppered amber bottles (or in dark), they will last several
months. Put a little of the suspect substance in a few drops of
ethanol (gin may do as a control), wet a filter paper strip in this
and allow to dry. Put one drop concentrated HCl on the dried paper
(dont let it touch anything). Alternativly, the powder can be placed
directly on the strip and the HCl dropped on it. A violet red or
violet blue indicates indole deriatives such as LSD. With DMT or
psilocybin the colout is redder. The colour must be observed soon
after adding the HCl as it rapidly changes.

COMPLETE SYNTHESIS OF LSD
---------------------------
Mix 32.8g (0.217M) methyl-6-methylnicotinate (other alkyl groups
can replace either methyl group) with 45.2g(0.2M) 5-bromoisatin
(apparently 4-Br or 4 or 5 Cl isatin will also work) in a 250ml flask
at 100¡ in an oil bath and raise the temperature to 1 70¡ and let
react for 70 mins. Cool and then grind the solid as fine as possible
in a mortar. Recrystallize from 150ml dimethylformamide and wash with
ether to get 40g (57%)
methyl-(5-bromo-3-isatylidene)-6-methyl-nicotinate (I). Suspend 10g(I)
in 250ml g lacial acetic acid and heat to boiling. Add in small
portions over 30 mins excess powdered zinc. Reflux one hour, filter
and evaporate in vacuum and recrystallize the residue from dioxane to
get 9.7g(95%) methyl(5-bromo-2-oxindol-3-yl)-6-methylnicotinate (II)
to get a suspension of 18g dry NaBH4 in 300ml dry tetrahydrofuran add
with stirring at 0¡ over 30 mins about 75g BF3 etherate. Stir 3 hours
at 0¡, add 18g (II) and heat exactly 20 mins at precisely 22-24¡. Add
carefully 150ml concentrated HCl while cooling. Add 200ml water and
stir 12 hours. Basify, extract the product with ethyl acetate and
dry,evaporate in vacuum to get 11g of residue which recrystallizes
from methanol to give methyl(2,3-dihydro-5-bromo-3-indolyl)
-6-methylnicotinate (III)
The following step may be unnessecary but it gives stability to
(III). The acetyl group can be split off at the end of the synthesis,
but is unnessecary since the 1-acetyl-LSD is as active as LSD.
Treat 12g (III) at room temperature for 24 hours with acetic
anhydride then hydrolyze and extract to get 11.5g residue which is
ground in petroleum ether and recrystallized from cyclohexane (can
chromatograph on alumina and elute with petroleum ether t o was out an
oil, then with benzene containing 5% ethyl acetate to elute the
product) to give
methyl-(1-acetyl-2,3-dihydro-3-indolyl)-6-methylnicotinate (IV). Heat
5g (IV), 12.5ml acetone, 12.5ml methanol and 1.8ml methyl iodide for
18 hours in a Carius t ube at 70¡-80¡ C. Cool, filter, wash with
acetone and recrystallize from methanol to get
methyl-(1-acetyl-2,3-dihydro-5-bromo-3-indolyl)-1,6-dimethylnicotinate
iodide (V). To 9.4g (V) in 250ml water and 250ml methanol at 35¡ add
over 5 mins 2.9g KBH4 and stir 10 mins. Add 2.9g more KBH4 and stir 30
mins. Evaporate in vacuum and extract the residue with methylene
chloride to get about 6.2g oily mixture containing about 2g of the d
isomer (can seperate by chromatography if desired) of
methyl-(1-acetyl-2,3-dihydro-5-bromo-3-indolyl)-6-methyl-1,2,5,6-tetrahydronicot-inate
(VI)
To a suspension of finely powdered NaNH2 (6.1g) in 2 litres dry
ammonia, add with stirring 8g (VI) in 50ml dry tetrahydrofuran. Stir
one hour, add NH4Cl and evaporate the ammonia as fast as possible in a
nitrogen stream. Extract at pH 8 with methylene chloride to get 6g
(can chromatograph on 300g silica gel and 250g celite and elute with
98% benzene-2% absolute ethanol and evaporate in vacuum) or
methyl-1-acetyl-2,3-dihydro-lysergate (VII)

One method of dehydrating (VII) is above under LYSERGiC ACiD FROM
2,3-dihydrolysergic acid and another follows.

Warm to dissolve 1.5g 2,3-dihydro-LSD in 5ml acetone, 40ml water
and 40ml saturated NaHCO3. Cool to 20¡ and add all at once with
vigourous stirring 2.46g potassium nitrosodisulfonate dissolved in
90ml water and 10ml saturates NaHCO3. After 1 min, extra ct 7 times
with ethylacetate, wash the combined extracts with water, dry and
carefully remove solvent to get a mixture of 12-OH-LSD, LSD and
starting material which can be chromatographed to give about 0.2g
12-OH-LSD.

The following method of converting (IV) to the diethylamide (which
can probably be used in place of (IV) to give the diethylamide of (V),
(VI) and (VII)) will probably also work admirably for (VII) or
lysergic acid.

Reflux 0.5g (IV) with 0.5 KOH in 30 ml methanol for 4
hours. Evaporate in vacuum and add water to the residue. Adjust the pH
to between 5 and 6 and filter or centrifuge to get 0.3g of the free
acid. Suspend 1.8g of the acid in 125ml chloroform, cool to minus 5¡
and add 0.5g triethylamine, then 0.6g ethylchloroformate and stir 45
mins. Add 2 ml diethylamine and stir 3 hours at room temperature to
get, after the usual workup 1g of the diethylamide (recrystallize from
benzene)

-----

I had some from a freind who did this...it works and is GREAT stuff.
 
That's great info although there's not much I can do with it. One thing is, the drug you get outta morning glory seeds and baby hawiian woodrose seeds is NOT LSD, it's LSA....similar, but not the same shit. You prolly know that.

One reason I thought acid became so scarce was because of Ecstasy hitting the streets. From a dealer's standpoint, you can make more from E than acid (which is much of a heavier drug), while Ecstasy only gets you high for a few hours and is more expensive. People'll do E every weekend, but acid will make you lose your mind if taken every weekend. It's economics. Either way, I'd sure like to see acid get popular again. I miss that shit.
 
You do know that you can get Magic Mushroom grow kits over the Net for the UK?
they work a treat and are only illegal once dried out for consumption, i would post links but im too lazy do a search on google you lazy bastards ;)
Also check out Salvia Another hallucinogenic herb LEGAL in the uk
A drug fairly easy to manufacture is also GHB which consists of Caustic Soda (Sodium Hydroxide) which is used for unblocking Drains which you can obtain from B&Q.
Peace out.
 
Back
Top Bottom